These steel mounts fix to the ceiling via a bracket with cover plate; a fixed stem allows internal cable management. Both swivel and tilt adjustments to the speaker are available and can be locked to desired position.
24496
The rectangular 160x118mm ceiling mount is a combination of mounting bracket and cover plate, the cover plate being fixed to the bracket by four M8x12 hex screws. A 20x12mm aperature on the side of the cover plate and a 62mm aperture on the mounting bracket allows both sub-surface or side exit of any cabling. Ceiling clearance of 250mm is provided by a one-piece steel stem fixed to the cover plate, internal cable management is provided via a 35x13mm aperture to the side of the stem. Fixed to the bottom of the stem is a 90x47mm bearing plate which is adjustable with 90 degrees of swivel 0-45 degrees of tilt. Loudspeakers with a vertical mounting hole spacing of 70 - 76.2mm can be mounted directly to the bearing plate. Further mounting options are provided by the K&M AP1 - AP6 series of adapter panel accessories. Maximum load capacity: 25kg. Weight: 1.79kg. Available in black or white finish.
Wall or ceiling-mounting bracket with universal ball joint, suitable for small loudspeakers up to 10kg. Available with either 3/8 inch male thread or 95 x 80mm bearing plate. Wall clearance of 160mm. Tilt adjustment of 0 - 90 degrees with a swivel adjustment of 360 degrees. Maximum load capacity: 10kg. Weight: 0.65kg.
Wall or ceiling-mounting bracket, suited to speakers up to 15kg. Sturdy one-piece arm gives 271mm clearance from wall or ceiling. Full 360 degree swivel with tilt angle of 0-90 degrees. Speakers are secured with 127x60mm bearing plate. Load capacity: 15kg. Weight: 1.08kg. Speakers can also be secured via the steel safety-wire supplied.
For a range of accessories for use with these ceiling mounts see K&M LOUDSPEAKER AND LIGHTING STANDS - Accessories