Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

24 Dezember 2024
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

FOCUSRITE REDNET D16R MKII AUDIO INTERFACE Rackmount, 16x16 AES3, 2x Dante I/O, dual PSU

Artikelnummer
95-8412
Hersteller
Focusrite
Typennummer
  • REDNET D16R MKII
FOCUSRITE REDNET D16R MKII AUDIO INTERFACE Rackmount, 16x16 AES3, 2x Dante I/O, dual PSU
FOCUSRITE REDNET D16R MKII AUDIO INTERFACE Rackmount, 16x16 AES3, 2x Dante I/O, dual PSUFOCUSRITE REDNET D16R MKII AUDIO INTERFACE Rackmount, 16x16 AES3, 2x Dante I/O, dual PSUFOCUSRITE REDNET D16R MKII AUDIO INTERFACE Rackmount, 16x16 AES3, 2x Dante I/O, dual PSU

Bestellangaben

MwSt. / Versand
2.496,00 
pro Stück (zzgl. MwSt.)
Dieses Produkt wird speziell für Ihre Bestellung eingekauft. Bei Stornierung können Gebühren entstehen, lieferbar in 3‑5 Arbeitstage. Brauchen Sie diesen Artikel schneller? Rufen Sie uns an

FOCUSRITE AUDIO INTERFACES - AoIP

Built on Focusrite’s decades of interface design experience and attention to audio detail, the RedNet series of audio interface has been designed for post production, broadcast audio, live sound and recording studio environments. These interfaces run with the flexibility of Dante, with some offering dual network connections and power redundancy.

RedNet A16R MKII Rackmount, 16x16 analogue I/O

RedNet D16R MKII Rackmount, 16x16 AES3 I/O

RedNet D16R MkII audio interface features sixteen channels of AES3 connectivity to and from a Dante audio network. It has been designed to bridge between digital consoles, power amplifiers or any other AES3 equipped audio equipment and a Dante network. Primary and secondary Ethernet connectors positioned on the rear facing panel allow 'maximum network reliability', and dual power supplies with separate sockets afford redundancy in the event of power failure.

In addition to redundant power and dual network connections, the rear facing panel houses all other I/O connections including audio inputs and outputs by way of 2x standard 8-channel (AES59) combined digital I/O DB25 connections along with a pair of 3-pin XLR connectors. The XLR input replaces input channels 1 and 2 on the DB25 connector, while the XLR output connection replicates DB25 output channels 1 and 2. S/PDIF input and outputs are provided on RCA (phono) connectors; 'ideal for connecting CD players or solidstate recorders'. This input replaces channels 3 and 4 in the DB25 connector, while the output can be assigned to replicate any adjacent odd/even pair. Dual 75ohm BNC connectors allow for word clock synchronisation of the Dante network to house clock, or syncing external equipment to the Dante network. DARS reference can also be accepted via the XLR input connector.

The front facing panel of the RedNet D16R MkII houses a set of LEDs to confirm network status, sample rate, clock sources and signal presence on both input and output. It also houses the on/off AC power switch.

Included accessories: 2x IEC AC mains cables.

Input/output trim range: Mute, then -78 to 0dB in 1dB steps (per channel). Input sample rate range: 32-216kHz. Gain error: -0.3dB. Dynamic range: Greater than 138dB. Latency: 11-45 samples. Supported sample rates: 44.1/48/88.2/96/176.4/192kHz at 24-bit. Pull-up/down: -4%, -0.1, +0.1, +4.167. Clock source: Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master. Dimensions (HxWxD): 44.5 x 482.6 x 263mm. Weight: 3.84kg

RedNet D64R Rackmount, 64x64 MADI/Dante bridge

RedNet HD32R Rackmount, 32x32 Pro Tools HD/Dante bridge

RedNet MP8R Rackmount, Mic preamp

RedNet AM2 Desktop monitoring unit

RedNet X2P Desktop, 2x2 analogue/Dante

RedNet R1 Desktop remote

RedNet PCIeNX Dante interface card