DEFENDER MIDI ER CABLE PROTECTOR End ramp

Defender Mini cable protections has been designed for use in trade fairs, walkways, marketplaces, workshops, warehouses, events, and department stores. It features three small channels, with channels 1 and 3 measuring 35 x 30mm, and the middle channel (2) measuring 35 x 35mm. A 2.0 tonnes per 20cm sq. maximum load capacity offers a channel filling height of 19.8mm, whilst a 1.2 ton load offers a filling height of 25.2mm. Straight sections measure 1005 x 290mm and have a height of 50mm. A LUX version offers semi-transparent lid for use with light ropes for better ramp identification in dark areas.

Defender MINI series straight sections (85200/85200BLK/85200LUX) measure 1005 x 290 x 50mm (LxWxH).

Defender suggest MINI series cable crossovers are not suitable for road traffic.

Series Components

Defender 3 has been designed for use in trade fairs, market places, workshops, warehouses, shopping centres and department stores. The cable protection has a profile height of 73mm and has three cable channels, one (the centre channel) measuring 45 x 50mm and two measuring 52 x 49mm. A load-bearing capacity of 5.0 tonnes per 20cm sq. and class B2 (DIN 4102) fire resistance, along with resistance to oil, acids, solvents, and petrol ensure safe crossing for both pedestrians and vehicles.

Defender 3 series consists of the 85002 straight section measuring 1000 x 600 x 73mm (LxWxH), 85009 45-degree curve, 85008 end ramp and 85002LUX straight section with a semi-translucent lid measuring 1000 x 600 x 73mm (LxWxH). The semi-translucent lid of the 85002LUX allows the user to insert LED lighting strip into one or more of the channels to illuminate the crossover section for extra visibility and safety.

Additional 85004 connector plugs are also available to fit the Defender 3 series cable crossover protection. As they are removable, it is not necessary to replace an entire crossover because a connector lug was ripped off.

Series Components

Defender 3 2D is a series of modular cable crossovers that allow linking in both length and depth orientation. This can be particularly useful for larger events whereby three channels may not be enough for the cable runs applicable. A 6-degree ramp can also be connected to allow wheelchairs or vehicles to cross without issue.

The cable crossover has three channels, with the centre channel of 45 x 50mm is flanked by two channels measuring 52 x 49mm. A half-length version is available as 86900250, and is particularly useful when creating a brick-style layout for strength. Maximum load is approximately 5.0 tonnes per 20cm sq. Adapters are available to ensure compatibility with Defender 3 series crossover - when using in lengthways layout.

Series Components

Available in yellow or blue finish, this cable crossover has five channels all measuring 34.5 x 38.6mm. Like Defender 3 2D, MIDI 5 2D if of modular design and therefore allows linking in both length and depth orientation. This can be particularly useful for larger events whereby three channels may not be enough for the cable runs applicable. The maximum load is approximately 5.0 tonnes per 25 x 30cm and is commonly used in locations where trucks or forklifts are crossing.

A 6-degree ramp can also be connected to allow wheelchairs or vehicles to cross without issue. Alternatively, 869302, a short depth ramp for non-wheeled crossover can be used. A complete wheelchair crossover set can be purchased as 869300SETBLU. This set includes ramps for both sides along with the central cable protection measuring a total of 1000 x 1185mm. All blue ramps have an embossed wheelchair logo for identification.

A half-length version is available as 869350/869350BLU, and is particularly useful when creating a brick-style layout for strength. Maximum load is approximately 5.0 tonnes per 20cm sq. Adapters are available to ensure compatibility with Defender 3 series crossover - when using in lengthways layout.

Series Components

Designed for 'extra-heavy-duty' environments, Defender Ultra L cable crossover has two main channels measuring 120 x 113mm, and two outer channels measuring 33 x 55mm.

Ultra L series has a Shore A hardness of 88 +/-4, and an approximate load capacity of 5.0 tonnes per 20cm sq. Fire resistance is in accordance with Class E DIN EN 13501-1, and the crossover is resistant to oil, petrol, and short-term contact with solvent.

Series Components

Designed for 'extra-heavy-duty' environments such as construction sites, warehouses or other places of heavy traffic, Defender Ultra L2 cable crossover has two main channels measuring 108 x 110mm, and four outer channels with a 25mm diameter.

Ultra L series has a Shore A hardness of 88 +/-4, and an approximate load capacity of 5.0 tonnes per 25 x 30cm. Fire resistance is in accordance with Class E DIN EN 13501-1, and the crossover is resistant to oil, petrol, and short-term contact with solvent. Ultra L2 series also have a 15mm diameter fixing hole on each corner of the cable crossover for use in street installations.

Series Components