K&M 19790 TABLET HOLDER 3/8-inch thread mount, 222-334mm x 128-232mm range, black

19746

A smartphone holder that can accommodate devices 64-84mm in width. The 'simple' push-to-grip holder can be rotated 360-degrees, and is supported by a flat, v-shaped base plate manufactured from steel. Smartphone holder is manufactured from plastic. A 100mm flexible gooseneck arm provides more accurate positioning. Base plate dimensions: 147.5 x 144mm. Weight: 1.42kg.

19800

A smartphone or tablet stand that is designed to be positioned on a desk top surface. A single hinged arm provides positioning from 0-150 degrees, whilst having the ability to rotate 360 degrees from the base. The holder is compatible with devices 130-224mm in width, with the ‘sturdy’ metal plate base providing counterbalance and security via four non-slip feet. Weight: 0.98kg

19797

This model can accommodate a variety of tablets with differing height, width, and depths. The plastic tablet clamp is compatible with devices such as Apple iPad, iPad 9.7, iPad Pro, Amazon Fire HDX 8.9, Google Nexus 9, and others of with a width of 102-189mm and height of 163-242mm. On first use, the size range can be adjusted before clamp screws set the positions. Subsequent mounting and un-mounting can be done quickly using a snap lock. A wing nut on the rear of the bracket adjusts the angle at which the tablet is displayed; portrait or landscape positions can also be set. 19797 has a steel desk-top stand with a footprint of 140x145mm (WxD). The base of the stand has four transparent rubber feet to prevent any slipping or scratching of the desk-top surface. Weight: 1.304kg.

19792

19792 has the same desk top design as 19797 but with the larger capacity, and therefore compatible with devices between 6-11mm deep; 222-334mm high; and 128-232mm wide – such as iPad Air, iPad Pro, Samsung Galaxy Tab (from 9.7), Asus Transformer or Microsoft Surface and Surface Pro. Weight: 1.304kg

19805

This smartphone or tablet holder can accommodate devices within a clamping range of 130-224mm and features a rubber-coated clamp that fixed to desk tops 0-35mm thick. A single arm is adjustable in angle, height and swivel range, and the clamp is freely rotatable through 360 degrees. Weight: 0.79kg

23874

A tablet holder manufactured from over 50% renewable plant-based raw material. The clamping range for the holder, which is positioned at the end of a pneumatic spring loaded arm, is 158-280mm and recommended for tablets measuring up to 20mm in thickness. The table clamp allows fixing to desktops measuring up to 85mm in thickness. Maximum load capacity: 8kg. Weight: 3.3kg.

19747

This smartphone holder has the same properties as 19746, however in place of a desktop base plate, the accessory has a pole mounting clamp. Weight: 0.225kg.

19743

A universal tablet holder that aids the mounting of tablets between 10-16 inches. The tablet holder adds to K&M's list of Bio-based plastic products. Bio-based plastic products are manufactured from 50 to 100%, plant-based renewable raw materials, such as corn starch, beet sugar, and vegetable oils, thus helping to reduce CO2 emissions and limited petroleum resources. The clamp is adjustable from 158-280mm in height, and 150-330mm in width, and can be positioned in landscape or portrait orientation. A fixed length arm connect the pole clamp to the device clamp. The pole clamp is compatible with diameters up to 30mm. Weight: 0.7kg

19765

A universal tablet holder with clamping mechanism for tablets measuring 10-16inches horizontal and 7-13inches vertical. The clamping range of this Bio-based plastic accessory is 155-307mm and is therefore able to mount a tablet in vertical or horizontal orientation. This mount is non-rotatable however it does allow for front to back tilt adjustment. A fixed length arm connect the pole clamp to the device clamp. The pole clamp is compatible with diameters up to 30mm. The device clamp is aided by a tension spring and arm that allows the user to securely fit their device. Weight: 0.58kg

19796

Similar to 19795 and 19797, 19796 can accommodate a variety of tablets with differing height, width, and depths including devices such as Apple iPad, iPad 9.7, iPad Pro, Amazon Fire HDX 8.9, and Google Nexus 9. On first use, the size range can be adjusted before clamp screws set the positions. Subsequent mounting and un-mounting can be done quickly using a snap lock. A wing nut on the rear of the bracket adjusts the angle at which the tablet is displayed; portrait or landscape positions can also be set. 19796 has a clamp and arm that attaches to tubes up to 30mm diameter, such as a microphone stand. Weight: 0.7kg

19791

This is similar to the 19796 but with the larger capacity, and therefore capable of holding devices between 6-11mm deep; 222-334mm high; and 128-232mm wide – such as iPad Air, iPad Pro, Samsung Galaxy Tab (from 9.7), Asus Transformer or Microsoft Surface and Surface Pro. Weight: 0.7kg.

19749

This smartphone holder has the same properties as 19746, however in place of a desktop base plate, the accessory is complete with tripod stand measuring 600-1400mm in height. Weight: 1.1kg.

19767

A universal tablet holder with clamping mechanism for tablets measuring 10-16inches horizontal and 7-13inches vertical. The clamping range of this Bio-based plastic accessory is 155-307mm and is therefore able to mount a tablet in vertical or horizontal orientation. This mount is complete with tripod stand. Weight: 1.81kg

19775

A universal tablet holder with stand that aids the mounting of tablets between 10-16 inches. The tablet holder adds to K&M's list of Bio-based plastic products. Bio-based plastic products are manufactured from 50 to 100%, plant-based renewable raw materials, such as corn starch, beet sugar, and vegetable oils, thus helping to reduce CO2 emissions and limited petroleum resources. The clamp is adjustable from 158-280mm in height, and 150-330mm in width, and can be positioned in landscape or portrait orientation. Weight: 1.8kg

19798

19798 has the same properties as 19795, however it includes a two-tiered stand with tripod base that can be adjusted between heights of 700mm and 1550mm. The tripod base of the stand has a diameter of 565mm when set up. The holder is compatible with devices 5-11mm deep; 163-242mm high; 102-189mm wide, making it compatible with devices such as Apple iPad, iPad 9.7, iPad Pro, Amazon Fire HDX 8.9, Google Nexus 9, and others of similar dimensions. On first use, the size range can be adjusted before clamp screws set the positions. Subsequent mounting and un-mounting can be done quickly using a snap lock. A wing nut on the rear of the bracket adjusts the angle at which the tablet is displayed; portrait or landscape positions can also be set. Weight: 1.73kg.

19793

This is the same as the 19798 however has a larger capacity and therefore compatible with devices between 6-11mm deep; 222-334mm high; and 128-232mm wide – such as iPad Air, iPad Pro, Samsung Galaxy Tab (from 9.7), Asus Transformer or Microsoft Surface and Surface Pro. The two-tiered stand can be adjusted between heights of 700mm and 1550mm. The tripod base of the stand has a diameter of 565mm when set up. Weight: 1.73kg.