K&M (König & Meyer) offer a range of stable, steel, floor-mounting stands for monitor loudspeakers complementing the existing range of loudspeaker stands. All floor standing models are manufactured with a telescopic steel stem and have a black finish. Stem height is adjustable by locking screw and safety pin or spring-loaded knob with clamp.
26773 Monitor Stand - Table top
26773 is a simple Z-style monitor stand that is available in three colours - black, white, and grey. The stand has a height of 253mm and a support platform of 150 x 180mm. The weight capacity of 15kg is balanced with the steel leg and 195 x 214mm base plate, whilst four rubber pads aid stability and noise filtration. Weight: 3.41kg
26772 Monitor Stand - Table top
This table top monitor stand has been designed from steel to hold monitors up to 15kg in weight. The top bearing plate measures 150 x 170mm and the height is adjustable from 167-254mm. The base, with has four rubber pads for stability and noise filtration, measures 214 x 214mm. Weight: 3.41kg.
26774 Monitor Stand - Table top
This monitor stand has the same feature set as the 26772 however it has been designed with greater monitor bearing plate dimensions of 230 x 250mm. Like 26772 the height is adjustable from 167-254mm, and the weight capacity is 15kg, however the base dimensions are larger at 290 x 295mm. Weight: 5.26kg.
26720 Monitor Stand - Three leg base
A steel stand with a fixed, screw-in, three-leg base, height range 680-1140mm. The top mounting plate is 205 x 245mm, with four rubber knobs on the upper surface. Internal cable routing through the stem is available. Maximum load capacity: 35kg. Weight: 5.35kg.
26722 Monitor Stand - Three leg base
This monitor stand has the same properties as 26720, however it features a larger bearing plate that measures 280 x 320mm and is therefore more suitable to larger monitors. Maximum load capacity: 35kg. Weight: 5.4kg
26740 Monitor Stand - Round base
This has a circular cast-iron base, diameter 450mm; height ranges from 950-1430mm. The top is 205mm x 245mm and incorporates four threaded support points and four rubber knobs on the upper surface to provide a degree of acoustic decoupling. Monitors with a 3/8 inch threaded insert (minimum depth 12mm) may be mounted directly onto the stand without use of the mounting plate. Maximum load capacity: 35kg. Weight: 9.88kg.
26775 Monitor Stand - Desktop
A height adjustable, desktop monitor stand with square base plate. The stand can be height adjusted in six steps between 250mm and 500mm, whilst the 205 x 245mm monitor bearing plate has a load capacity of 25kg. Four rubber pads on the base plate provide stability and noise filtration. Weight: 3.6kg
26776 Monitor Stand - Desktop, tiltable
Very similar in design to 26775 however the monitor bearing plate can be tilted from 0-12.5 degrees. The bearing plate can also be adjusted to cope with differing centre of gravity of monitor types. Four stages of height adjustment from 350-450mm can be set. A slightly larger (in comparison to 26775) bearing plate of 230 x 250mm has a lip to prevent monitor slipping. Weight: 4.15kg.
26777 Monitor Stand - Clamping
A height adjustable, desktop monitor stand with table clamp with range of 10-52mm. The stand can be height adjusted in six steps between 335mm and 485mm, whilst the 205 x 245mm monitor bearing plate has a load capacity of 25kg and can be rotated 360 degrees for best positioning. Weight: 3.1kg
26778 Monitor Stand - Clamping, tiltable
Very similar in design to 26777 however the monitor bearing plate can be tilted from 0-12.5 degrees. The bearing plate can also be adjusted to cope with differing centre of gravity of monitor types. Four stages of height adjustment from 335-435mm can be set. A slightly larger (in comparison to 26777) bearing plate of 230 x 250mm has a lip to prevent monitor slipping. Weight: 3.1kg.
26785 Monitor Stand - For Genelec 8000 series
An elegant, steel stand with a 420 x 420mm cast-iron base; height ranges from 1100-1700mm. Specifically for use with the Genelec 8000 monitor series - the loudspeaker is mounted to the stand by means of a mounting plate and four M6 x14mm screws. The loudspeaker, complete with mounting plate, is then suspended from a bar at the top of the stem, with the weight of the monitor holding the unit in place. Vertical tilting of the monitor from -10 to +10 degrees is also possible, with it's position being locked via a large, knurled, locking-screw. Internal cable routing through the stem is available. Weight: 14.5kg.
26795 Monitor Stand - Heavy duty
Similar in design to the 26785, with a 480 x 480mm cast-iron base this is suited to holding heavier loads. It has a telescopic steel stem combination of 76/60mm in diameter ,with a height range from 794-1344mm. Internal cable routing through the stem is available. Maximum load capacity: 70kg. Weight: 17.5kg. Designed to work with the K&M 26792 bearing plate which is available in three sizes (240x200mm, 320x280 and 420x380) depending on the size of the monitor loudspeaker.
For a range of accessories for use with these floor mounting stands see K&M LOUDSPEAKER AND LIGHTING STANDS - Accessories.