Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

12 November 2024
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

SHURE WL50B MICROPHONE Sub miniature, omnidirectional, black

Artikelnummer
74-6428
Hersteller
Shure
Typennummer
  • WL50B
Farbe
  • BlackBlack
SHURE WL50B MICROPHONE Sub miniature, omnidirectional, black
SHURE WL50B MICROPHONE Sub miniature, omnidirectional, black

Bestellangaben

MwSt. / Versand
Dieser Artikel wurde eingestellt. Bitte wenden Sie sich an unser technisches Unterstützungsteam für Informationen über Alternativen.
RoHS Konform

WL50 Professional Subminiature Lavalier Microphones

Shure's new WL50 lavalier microphone series sets a new standard for miniature microphones. Visually unobtrusive, the WL50s are ideal for theater, television broadcast, video/film, and event production. Designed for applications that require minimal visibility without compromising sound quality, these microphones are available individually, as well as with the Shure UHF and UC Wireless Systems. 

  • WL50B : Black, standard sensitivity, 5-ft attached cable with TA4F connector 
  • WL50BX : Black, standard sensitivity, 10-ft attached cable with tinned ends
  • WL50T : Tan, standard sensitivity, 5-ft attached cable with TA4F connector 
  • WL50T-LO : Tan, reduced sensitivity, 5-ft attached cable with TA4F connector 
  • WL50W : White, standard sensitivity, 5-ft attached cable with TA4F connector 

Features

  • All models include foam windscreens, swiveling lapel clip, dual tie clip, magnet mount, and mini mount
  • Subminiature size (5.8 mm diameter x 11 mm height)
  • Electret condenser cartridge
  • Omnidirectional pattern
  • Two termination options: 4-pin mini connector (fits directly into Shure wireless transmitters), or unterminated (bare wire)
  • Two sensitivities available:
  • Standard: -40 dBV/Pa (for speech applications)
  • Reduced: -50 dBV/Pa (10 dB more headroom for theater applications)
  • Interchangeable equalization caps for optimal clarity and response:
  • Silver mesh cap provides a 4 dB boost in the 8-18 kHz range - typically used in applications that require a microphone to be head-mounted
  • Gold mesh cap provides a 10 dB boost centered at 12 kHz - typically used in applications that require a chest-worn microphone
  • Black, beige, and white models are available
  • All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens
  • Frequency response: 20-20,000 Hz

Specifications

SPECIFICATIONS WL50
Measured with test circuit (see User Guide)		 WL50-LO
Measured with test circuit (see User Guide)		 MC50
Measured with RPM626 Preamplifier		 WL51
Measured with test circuit (see User Guide)		 MC51
Measured with RPM626 Preamplifier
Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias)
Polar Pattern Omnidirectional Omnidirectional Omnidirectional Cardioid Cardioid
Output Impedance N/A N/A 136 ohms actual (rated at 150 ohms) N/A 136 ohms actual (rated at 150 ohms)
Recommended Min.
Input Impedance		 20 kilohms 20 kilohms N/A 20 kilohms N/A
Output Level �45.0 dBV/Pa
(1 Pa=94 dB SPL)		 �54.0 dBV/Pa
(1 Pa=94 dB SPL)		 �41.0 dBV/Pa
(1 Pa=94 dB SPL)		 �50.0 dBV/Pa
(1 Pa=94 dB SPL)		 �46.0 dBV/Pa
(1 Pa=94 dB SPL)
Maximum SPL 133 dB at 1% THD/
20 kilohm load		 142 dB at 1% THD/
20 kilohm load		 138 dB at 1% THD/
1 kilohm load		 138 dB at 1% THD/
20 kilohm load		 143 dB at 1% THD/1 kilohm load
Frequency Response 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz
Dynamic Range 103.0 dB 103.0 dB 108.0 dB 103.0 dB 108.0 dB
Output Noise
(equivalent SPL, A-weighted)		 30 dB typical; 33 dB maximum 39 dB typical; 42 dB maximum 30 dB typical; 33 dB maximum 35 dB typical; 38 dB maximum 35 dB typical; 38 dB maximum
Signal-to-Noise Ratio 64 dB at 94 dB SPL 55 dB at 94 dB SPL 64 dB at 94 dB SPL 59 dB at 94 dB SPL 59 dB at 94 dB SPL
Power Requirements +5 Vdc on pin 2, return on pin 1 (ground). +5 Vdc on pin 2, return on pin 1 (ground). 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1). +5 Vdc on pin 2, return on pin 1 (ground). 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1).
Current Drain 60�130 µA 60�130 µA 4.6 mA 60�130 µA 4.6 mA
Polarity�Positive pressure on
the diaphragm produces a
positive voltage at:		 Pin 3 relative to pin 1 at the output connector of the microphone. pin 2 relative to pin 3 of the output
connector of preamplifier.		 pin 3 relative to pin 1 at the
output connector of the
microphone.		 pin 2 relative to pin 3 of the output
connector of preamplifier.
Overvoltage Protection N/A N/A +/- 75.0 Vdc maximum from pins
2 and 3 to pin 1.		 N/A +/- 75.0 Vdc maximum from pins
2 and 3 to pin 1.
Cap and Overmold Material Polypropylene
Environmental Conditions Operating Temperatures: �18 to 57 degrees C (0 to 135 degrees F)
Storage Temperatures: �29 to 74 degrees C (�20 to 165 degrees F)
Humidity: 0 to 95%
Packaged Weight 188 g (6.63 oz.) 188 g (6.63 oz.) 305 g (10.76 oz.) 188 g (6.63 oz.) 305 g (10.76 oz.)
Cable and Connector 1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.		 1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X�LO: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.		 1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).		 1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.		 1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
Microphone and Preamp
Dimensions		 See User Guide
Net Weight WL50: 21 g (0.7 oz.) with cable
and connector.
WL50X: 28 g (1.0 oz.) with 3 m
(10 ft.) stripped and tinned
cable.		 WL50�LO: 21 g (0.7 oz.) with
cable and connector.
WL50X�LO: 28 g (1.0 oz.) with
3 m (10 ft.) stripped and tinned
cable.		 121 g (4.3 oz.) with cable,
connector, and preamplifier.		 WL51 21 g (0.7 oz.) with cable
and connector. WL51X: 28 g
(1.0 oz.) with 3 m (10 ft.)
stripped and tinned cable.		 121 g (4.3 oz.) with cable,
connector, and preamplifier.