Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

19 Dezember 2024
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

LYNX YELLOBRIK ODT 1510 FIBRE TRANSCEIVER RS232/422/485/2x GPI, 2x SM LC, 1310nm TX, 10km

Artikelnummer
90-3013
Hersteller
Lynx (Lynx Technik)
Typennummer
  • ODT 1510
LYNX YELLOBRIK ODT 1510 FIBRE TRANSCEIVER RS232/422/485/2x GPI, 2x SM LC, 1310nm TX, 10km
LYNX YELLOBRIK ODT 1510 FIBRE TRANSCEIVER RS232/422/485/2x GPI, 2x SM LC, 1310nm TX, 10km

LYNX YELLOBRIK FIBRE OPTIC EXTENDERS - Ethernet, Serial and GPI - 10km

These modules, part of the yellobrik range manufactured by Lynx Technik, extend electrical communications circuits over distances of up to 10km using fibre optic cables. The range includes models supporting up to gigabit Ethernet or alternatively serial RS422, 432, 485 protocols combined with dual bi-directional GPI signaling. This can be accomplished, depending on model, using either a duplex fibre link or a single, multiplexed, fibre link. Modules may be used alone, or mounted in an optional rack-mounting frame.

Common Specifications
Serial connections: EIA/ETA RS232C / RS422 / RS485, RJ45
Max electrical nodes for RS422/485: 25 (ESD protection for up to 26kV)
GPI connections: 2x inputs, 2x outputs per module
GPI inputs: External passive closure between pins (short) to trigger, maximum input switching frequency 25Hz (50 operations / second).
Input insulation: 3.75kV
GPI outputs: Internal contact closure (relay), maximum switching frequency 25Hz (50 operations / second), maximum switching power 220 VDC, 0.25A or 250V AC, 0.25A.
Output insulation: 3.75kV
Ethernet: 2x ports, 10 BaseT, 100 BaseT, 1000 BaseT
Fibre maximum distance: 10km, singlemode; 300m, multimode
Power source: 9-14V DC (AC adapter supplied)
Dimensions: 105 x 40 x 22mm

Standard accessories: All yellobrik modules are supplied with a plug-top power supply, complete with UK, US, Australian and European plug fittings, and hook and loop pads for easy attachment to a suitable surface.
Optional accessories: Power adapter cables for 12V working, alternative power supplies and a rack-mounting frame for to 14 Yellobrik modules are available. Please see Lynx Yellobrik Power Supplies And Mounting Accessories.

ODT 1510 and ODT 1510 MM - Serial and GPI - 2x fibres

The ODT 1510 is a multi-function module which, when used with another ODT 1510 in the remote location, will extend the reach of a serial connection as well as two GPI general purpose interface circuits up to 10km (ODT 1510 singlemode) or 300m (ODT 1510 MM multimode) over two fibres. A single RJ45 electrical serial connection can be configured for RS232, RS422 or RS485 serial standards. A separate RJ45 connector is provided for two electrical GPI inputs and outputs. Serial communications and GPI are transmitted and extended over the same duplex fibre link. The ODT 1510 is 'completely agnostic to the serial protocol used, and supports all standard protocols and proprietary protocols at data rates from 300 to 460K Baud (auto sensing and auto adjusting)'.

The integrated DIP switch provides control over the serial mode of operation with selection of the serial standard, serial termination, RX/TX crossover and RS422/485 data direction (automatic or manual). Data activity LEDs are provided for the serial port and the GPI port under the respective RJ45 connectors. The ODT 1510 also supports 'mixing and matching of serial standards'. For example, the transmitting module can have a RS232 input, and the receiving module can be set for RS422 output. The ODT 1510 is '100 percent plug and play, hot pluggable and no special software drivers are required'.

ODT 1510
Fibre connections: 2x fibre optic ports, one transmit, one receive, singlemode LC/PC duplex connection.
Transmit wavelength: 1310nm, -3dBm
Receive wavelength: 1260 to 1620nm, -3dBm to -21dBm
ODT 1510 MM
Fibre connections: 2x fibre optic ports, one transmit, one receive, multimode LC/PC duplex connection.
Transmit wavelength: 850nm, -6dBm
Receive wavelength: 700 to 900nm, maximum sensitivity -17dBm

OET 1514 and OET 1514 MM - Ethernet - 2x fibres

OBD 1510 D - Serial and GPI - 1x WDM fibre

OBD 1514 E - Ethernet - 1x WDM fibre

Technical note: WDM

WDM is wavelength-division multiplexing. This technology multiplexes a number of optical carrier signals onto a single fibre by using different wavelengths of light. This can be used to increase the capacity of the fibre or to enable bi-directional communication over a single fibre.