AKG GN30 GOOSENECK 305mm, no capsule, LED, inline phantom adapter, screw-on installation

H500

A shock mount designed for the permanent installation of E version, GN series goosenecks along with M versions. A ‘durable’ plastic shell houses a flexible inner rubber boot that provides ‘attenuation of structure-born noise by 12dB’. Requires hole cut out of 50mm

Dimensions (Diameter x Depth): 73.8mm x 59.2mm, total; 49.8mm, below surface.

H600

A shock mount designed for the permanent installation of E version, GN series goosenecks as well M versions of the DAM+ series.. A ‘durable’ plastic shell houses a flexible inner rubber boot that provides ‘attenuation of structure-born noise by 20dB’. A locking clutch adds security, preventing easy removal of gooseneck. Requires hole cut out of 53mm

Dimensions (Diameter x Depth): 69mm x 31mm, total; 29mm, below surface.

MF M

A flush-mount module that reduces noise created from the surface to which it is fixed. MF M is designed to integrate a power module from the DAM+ series and allow microphones to be detached when not in use. Requires a hole cut out of 50mm.

STS DAM+

A tabletop base stand for DAM+ series modules. Weighing 900g, the heavy base maintains the position of the microphone and prevents accidental movement. An integrated switch can be programmed to control push to talk, push to mute, push on/off, and low cut on/off; with the status of the control signified on the LED of the attached gooseneck. Output is by way of 3-pin XLR. Powered via 9-52V phantom power.

Dimensions (LxWxH): 135 x 90 x 40mm. Weight: 900g.

PAE M – 3-pin XLR, bass roll off

This phantom power module can be used for either fixed or temporary installation. It accepts 9-52V phantom power and has switchable bass roll-off at 250Hz – effective in the process of body noise reduction and proximity effect.

Dimensions (Diameter x H): 19.1 x 65.5mm. Weight: 43g

PAE5 M – 5-pin XLR, bass roll off

This phantom power module has the same properties as PAE M, however it is terminated with 5-pin XLR – allowing the audio and control voltage signals for LED to be fed separately. Pins 1, 3, and 5 are audio ground, audio in phase, and audio return respectively; and pins 2 and 4 are for the LED ring.

Dimensions (Diameter x H): 19.1 x 65.5mm. Weight: 43g

PAESP M – 3-pin XLR, programmable

This phantom power module includes a BCD (binary coded decimal) switch that allows the user to recall an operating mode and then adjust. Programmable modes include bass roll-off, LED ring mode, and microphone switch mode. Powered via 9-52V phantom power.

Dimensions (Diameter x H): 19.1 x 100.5mm. Weight: 63g

CK31 - Cardioid

CK31 is a pre-polarized condenser microphone capsule designed for sound reinforcement and recording. It has a pickup angle of 125 degrees and a 'wide frequency range' for a 'speech-optimized audio performance'. Requires 9-52V phantom power. CK31 is supplied with W30 windshield. Compatible with DAM series goosenecks.

Response: 50Hz to 20kHz. Sensitivity: 20mV/Pa. Dimensions (length x diameter): 20 x 13.5mm. Weight: 5g

CK33 - Hyper-cardioid

CK33 is designed for sound reinforcement and recording and with a pickup angle of 95 degrees the capsule is, apparently, 'a good choice in situations when noise comes from the sides or people talk into the microphone from greater distances'. It has a 'wide frequency range' for a 'speech-optimized audio performance'. Requires 9-52V phantom power. CK33 is supplied with W30 windshield. Compatible with DAM series goosenecks.

Response: 50Hz to 20kHz. Sensitivity: 20mV/Pa. Dimensions (length x diameter): 20 x 13.5mm. Weight: 5g

CK41 – Wide-cardioid

CK41 is compatible with DAM+ series goosenecks and offers a wide cardioid polar pattern. The frequency response of 60Hz to 20kHz is optimized for speech applications, whilst a maximum SPL of 142dB offers higher levels of input. Includes windscreen. Optional W40 M wire mesh windscreen is available to order.

Response: 60Hz to 20kHz. Sensitivity: 5mV/Pa. Dimensions (length x diameter): 20 x 9mm. Weight: 3.9g

CK49 – Hyper-cardioid

Designed for lectern use in presentations and theatres, CK49 is a reference condenser capsule with a hyper-cardioid pickup pattern. An 80-degree polar pattern compliments speakers that may be inexperienced in microphone use. Compatible with DAM+ series goosenecks.

Response: 60Hz to 15kHz. Sensitivity: 10mV/Pa. Dimensions (length x diameter): 20 x 9mm. Weight: 24.9g

CK80 - Hyper-cardioid

CK80 is suitable for speech reinforcement. The shotgun capsule offers, according to AKG, a 'speech-optimized frequency response' and 'an unbeatable price/performance ratio and good speech intelligibility in acoustically critical applications'. CK80 is supplied with W80 windshield. Compatible with DAM series goosenecks.

Response: 60Hz to 15kHz. Sensitivity: 30mV/Pa. Dimensions (length x diameter): 146 x 13.5mm. Weight: 15g