m!ka microphone arms are internally wired as standard, and use an elegant, single-tube design with articulated joints and internal springs, which may be adjusted with one hand. Two different reaches are offered, along with option of two finishes, black and natural aluminium. The microphone arms support microphones up to 2kg and can be mounted directly to surfaces using either a flush bracket or G-clamp, or raised higher by using the support pole.
Versions with OnAir LED incorporate a dual colour red/white LED ring adjacent to the microphone clamp to enable a 'mic live' or 'on air' indication to be given to the presenter. The colour can be toggled by reversing the polarity of the drive voltage. The arm is internally wired with a combination cable, a screened pair plus control pair in overall jacket, and requires 12-24V DC for operation. An OnAir version of the XS Mic Arm (535mm) is also available for those requiring a lesser reach.
m!ka Mic Arms are available with unterminated cable or fitted with XLR connectors. Note: Terminated versions without OnAir LED are terminated with 3-pin female XLR at the top and a 3-pin male XLR at the base, whereas terminated versions of those Mic Arms with OnAir LED are terminated with a 3-pin female XLR at the top and a 5-pin male XLR at the base.
Available versions
These horizontal microphone arms have been designed specifically for those who wish to leave their field of vision free these are particularly useful in TV broadcast studios. They have three sections with the second and third sections connected with a vertical adjustment joint. The section closest to the microphone is 200mm in length, the middle section is 250mm in length, and the third section is 230mm in length. They are available in aluminium or black finish.
Versions with OnAir LED incorporate a dual colour red/white LED ring adjacent to the microphone clamp to enable a 'mic live' or 'on air' indication to be given to the presenter. The colour can be toggled by reversing the polarity of the drive voltage. The arm is internally wired with a combination cable, a screened pair plus control pair in overall jacket, and requires 12-24V DC for operation.
The basic units have bare cable ends for the user to fit connectors, but they are also available with a 3-pin female XLR at the top and a 3-pin male XLR at the base. They support microphones up to 1.5kg.
m!ka Mic Arm TV are available with unterminated cable or fitted with XLR connectors. Note: Terminated versions without OnAir LED are terminated with 3-pin female XLR at the top and a 3-pin male XLR at the base, whereas terminated versions of those Mic Arms with OnAir LED are terminated with a 3-pin female XLR at the top and a 5-pin male XLR at the base.
Available versions