Formally known as the DPA d:screet series, this range of DPA CORE microphones implements new technology within existing DPA capsules, to provide a more defined sound by minimising distortion and expanding the dynamic range. Although originally designed for use with wireless systems in theatre, television and close-positioned instrument applications, the omnidirectional capsules also use 'hermetic sealing' and a 'nano coating' to provide an IP rating of 58 - particularly relevant to on-field sports, where moisture from the body or atmosphere are unavoidable.
The acoustic response of the microphone is selected by the choice of two 'protection grids' supplied with each microphone. The short grid gives a 3dB soft boost at 8-20kHz and is intended to be used when the microphone is mounted on the performer's head. The long grid gives a 10dB boost at 12kHz, intended for chest placement. The grids can be detached from the microphone and cleaned of sweat, make-up etc. with alcohol. The microphones are fitted with cable terminated in a 'MicroDot' connector. A range of adapters for different wireless transmitters and direct cable connection is available. A range of fixing clips (not included) are also available.
The omnidirectional DPA CORE 4060 has a 6dB increase over the Legacy 4060 capsule, giving a dynamic range of 106dB typical, and a maximum SPL of 134dB. Originally designed for use in television and film sound recording, the microphone is also frequently used for a range of close-miking, including instruments. The pre-polarised condenser mic has a frequency range of 20Hz-20kHz and a nominal sensitivity of 20mV/Pa. The microphone is 'well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise'. the 4060 is best suited for close pick-up of voice or instrument. Available in black, brown, beige or white finish.
Directional pattern: Omnidirectional. Frequency response: 20Hz - 20kHz. Effective range: 20Hz - 20kHz, 3dB soft boost at 8 - 20kHz. Soft boost grid; 20Hz - 20kHz, 10dB boost at 12kHz, High boost grid. Sensitivity: 20mV/Pa; -34dB re. 1V/Pa. Equivalent noise level: Typ. 23dB(A) re. 20µPa (max. 26dB(A)). THD: 126dB SPL, RMS; 129dB SPL, peak. Dynamic range: Typ. 106dB. Maximum SPL: 134dB SPL peak. Output impedance: 30-40ohms. Cable length: 1.8m. Dimensions (Diam x L): 5.4 x 12.7mm. Weight: 7.5g, with cable and MicroDot connector.
4660 CORE - For normal SPL, heavy duty
| This microphone has the same audio properties and capsule features as the DPA 4060 CORE, however it has a stainless steel housing, heavy-duty cable relief, and reinforced cable 2.2mm cable. The microphone is available in black or beige finish with MicroDot termination. Weight: 13g. |
The omnidirectional DPA 4061 CORE has a 14dB increase over the Legacy capsule, giving a dynamic range of 111dB typical, and a maximum SPL of 144dB. The microphone is therefore suited to mike very loud sound sources. The frequency response and physical properties are the same as the 4060 CORE however a nominal sensitivity of 6mV/Pa means the 4061 CORE is more suited to hidden, head-mounted applications in venues such as theatres. Available in black, brown, beige or white finish.
Directional pattern: Omnidirectional. Frequency response: 20Hz - 20kHz. Effective range: 20Hz - 20kHz, 3dB soft boost at 8 - 20kHz. Soft boost grid; 20Hz - 20kHz, 10dB boost at 12kHz, High boost grid. Sensitivity: 6mV/Pa; -44dB re. 1V/Pa. Equivalent noise level: Typ. 26dB(A) re. 20µPa (max. 28dB(A)). THD: 134dB SPL, RMS; 137dB SPL, peak. Dynamic range: Typ. 111dB. Maximum SPL: 144dB SPL peak. Output impedance: 30-40ohms. Cable length: 1.8m. Dimensions (Diam x L): 5.4 x 12.7mm. Weight: 7.5g, with cable and MicroDot connector.
4661 CORE - For loud SPL, heavy duty
| This microphone has the same audio properties and capsule features as the DPA 4061 CORE, however it has a stainless steel housing, heavy-duty cable relief, and reinforced cable 2.2mm cable. The microphone is available in black or beige finish with MicroDot termination. Weight: 13g. |
DPA 4062 CORE is an omnidirectional capsule that has an 'extremely loud' maximum SPL of 154dB. The microphone is therefore suited to very loud noise situations and positions such as car exhausts or engine bays. DPA mention that the 4062 CORE was used by Günther Raupp to record the sound of a Ferrari. 4062 CORE is available in black or beige.
Directional pattern: Omnidirectional. Frequency response: 20Hz - 20kHz. Effective range: 20Hz - 20kHz, 3dB soft boost at 8 - 20kHz. Soft boost grid; 20Hz - 20kHz, 10dB boost at 12kHz, High boost grid. Sensitivity: 1mV/Pa; -44dB re. 1V/Pa. Equivalent noise level: Typ. 45dB(A) re. 20µPa (max. 37dB(A)). THD: 136dB SPL, RMS; 139dB SPL, peak. Dynamic range: Typ. 106dB. Maximum SPL: 154dB SPL peak. Output impedance: 30-40ohms. Cable length: 1.8m. Dimensions (Diam x L): 5.4 x 12.7mm. Weight: 7.5g, with cable and MicroDot connector.
4063 CORE - For Loud SPL/Low voltage
DPA 4063 CORE is similar to the CORE 4060, but with the addition of an FET preamplifier at the input stage, for better operation, with full performance, on lower voltage supplies. Power supply for full performance: 3-30V for wireless systems through DPA adapter; 48V +/-4V phantom power with DAD6001-BC/DAD6024/DAD4099. With a 12dB increase from the Legacy capsule, the CORE 4063 gives a dynamic range of 109dB and a maximum SPL of 135dB. This capsule is available in black, beige or white.
Directional pattern: Omnidirectional. Frequency response: 20Hz - 20kHz. Effective range: 20Hz - 20kHz, 3dB soft boost at 8 - 20kHz. Soft boost grid; 20Hz - 20kHz, 10dB boost at 12kHz, High boost grid. Sensitivity: 6mV/Pa; -44dB re. 1V/Pa. Equivalent noise level: Typ. 26dB(A) re. 20µPa (max. 20dB(A)). THD: 132dB SPL, RMS; 135dB SPL, peak. Dynamic range: Typ. 109dB. Maximum SPL: 138dB SPL peak. Output impedance: 30-40ohms. Cable length: 1.8m. Dimensions (Diam x L): 5.4 x 12.7mm. Weight: 7.5g, with cable and MicroDot connector.
4071 CORE - With presence boost
Available in black, beige, or white, DPA 4071 CORE omnidirectional microphone is designed specifically for ENG work. A low-cut filter below 100Hz and a 5dB soft presence boost between 4-6kHz to give better speech reproduction. The microphone is designed to cater for loud SPL application.
Directional pattern: Omnidirectional. Frequency response: 20Hz - 20kHz. Effective range: 100Hz - 15kHz with typ. 5dB soft boost at 4 - 6kHz. Sensitivity: 6mV/Pa; -44dB re. 1V/Pa. Equivalent noise level: Typ. 26dB(A) re. 20µPa (max. 20dB(A)). THD: 134dB SPL, RMS; 137dB SPL, peak. Dynamic range: Typ. 111dB. Maximum SPL: 144dB SPL peak. Output impedance: 30-40ohms. Cable length: 1.8m. Dimensions (Diam x L): 5.4 x 17.6mm. Weight: 7.5g, with cable and MicroDot connector.
4671 CORE - With presence boost, heavy duty
This microphone has the same audio properties and capsule features as the DPA 4071 CORE, however it has a stainless steel housing, heavy-duty cable relief, and reinforced cable 2.2mm cable. The microphone is available in black finish with MicroDot termination. Weight: 14g.
4080 CORE
DPA 4080 CORE is an acoustically pre-equalized, cardioid, lavalier microphone. Designed for broadcast, conferencing, and live performance, 4080 CORE offers 'maximum side rejection and excellent sonic focus on the subject'. The microphone is supplied with a pre-mounted pop filter with integrated shock mount. A clip is provided to attach to clothing. This microphone is not compatible with the optional long or short boost grids. Finish is black.
Optional accessories and spares: DMM0014 single clip, DMM0015 dual clip, DMM0016 magnet mount, SM4080 spare shock mount.
Directional pattern: Cardioid. Frequency response: 20Hz - 20kHz. Effective range: 250Hz - 17kHz with typ. 4dB soft boost at 4-6kHz (-5dB at 10 Hz). Equivalent noise level: Typ. 23dB(A) re. 20µPa (max. 26dB(A)). THD: 126dB SPL, RMS; 129dB SPL, peak. Dynamic range: Typ. 106dB. Maximum SPL: 134dB SPL peak. Output impedance: 30-40ohms. Cable length: 1.2m. Dimensions (Diam x L): 5.7 x 30mm. Weight: 15g, with cable and MicroDot connector.