Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

18 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

MUXLAB 500756-TX VIDEO EXTENDER Transmitter, 3G-SDI over IP, PoE, RS232, 120m reach

Artikelnummer
89-0928
Hersteller
Muxlab
Typennummer
  • 500756
  • 500756-TX
MUXLAB 500756-TX VIDEO EXTENDER Transmitter, 3G-SDI over IP, PoE, RS232, 120m reach
MUXLAB 500756-TX VIDEO EXTENDER Transmitter, 3G-SDI over IP, PoE, RS232, 120m reach

MUXLAB VIDEO EXTENDERS - Over IP

MuxLab video extenders are available in point to point, point to multi-point, and multi-point to multi-point configurations, facilitating the transfer of data from compatible equipment over IP for distances up to 120m. They are typically used for live video, broadcast, and studio to studio production and data transfer.

3G Video Extenders


500756 - 3G-SDI, 120m reach

Transmitter (500756-TX) and receiver (500756-RX) 3G-SDI extender over IP components with RS232. Together they offer 'easy extension and distribution of broadcast quality SDI, HD-SDI or 3G-SDI video with embedded audio over local area networks'. It may also be used in point-to-point mode, without a network switch.

Used as a point-to-point link, without a network switch and in conjunction with each other, they will provide transmission of 3G SDI video over a length of up to 120 metres of Cat5E or Cat6 cable. When used with a network switch, whereby point to multipoint, and multipoint to multipoint becomes possible, the maximum reach is set by the design of the network. If it is a Cat5E wired network, then each segment of cable can be up to 100 metres, so a simple network with a single switch has a maximum reach of 200 metres, if the switch can be placed exactly in the middle. The introduction of extra switches and perhaps fibre cabling will increase the available extension.

Both the 500756-TX transmitter and 500756-RX receiver support PoE and have LEDs for 'Link' and 'Power' on the front panel, as well as four miniature (DIP) switches for setting the address of the device. On the rear they have a female BNC for the video connection, a 3.5mm jack socket for on IR emitter or IR detector, a socket for power and an RJ45 connector for the network connection. A 9-pin D-sub connector provides the RS232 connection in each case, with a male version on the receiver and female on the transmitter.

Signals supported: SD-SDI, HD-SDI, 3G-SDI protocol, IR pass-through and RS232 bi-directional communication. Note that 3G-SDI level B is not fully supported. Embedded audio support. Bandwidth: 2.94Gbps.

Power source: Both units may be powered by power over Ethernet where available, or 5V DC from two optional AC adapters. Power drawn: 2.9W transmitter, 1.8W receiver. Dimensions: 112 x 76 x 25mm, each unit. Weight; 0.5kg. Operating temperature: 0 to 40 degrees C.

Optional power supply: 500993

HDMI Video Extenders

HDMI KVM Video Extenders

Power Supplies (optional)