RDL AV-DC4 DIVIDER/COMBINER Line-level, XLR I/O

These designs provide ground-Isolation in balanced and unbalanced line-level systems to remove ground or earth-loops, thus removing the main cause of hum. Suitable for portable use or permanent installation they are built in rugged metal cases and are supplied with mounting brackets. Both mono, balanced and stereo, unbalanced, transformer-isolated types are offered.

AV-HK1 - Stereo - Dual RCA (phono) inputs and outputs

For use with unbalanced, high-impedance audio inputs, this has gold-plated input and output connectors. The AV-HK1 is supplied with two adapter cables to facilitate connecting with products that use miniature jack plugs and sockets.

The shield connection of each input socket is electrically isolated from the case and from the output ground. The shield connection of each output socket is connected to the case shield. The user audio source, such as a computer, CD player, cassette player or other consumer audio product, connects to the input. The output should be connected to the input of the grounded amplifier or mixer in the audio system.

Inputs: -10dBV nominal, 10kohms. Response: 20Hz-20kHz, +/- 3dB. Distortion: Better than 0.5% THD+N, 30Hz-20kHz; 0.05% at 1kHz. Crosstalk: Better than -60dB, 20Hz- 20kHz, 100ohms source, 10 kohms load; -70dB a 1kHz. Outputs: -10dBV nominal, 10kohms. Dimensions: 35 unmounted, 36.6 mounted x 52 x 73.7 (h x w x l) mm.

Included accessories: Mounting bracket. AV-AC2 Cable Kit: 1x dual RCA (phono) to 3.5mm stereo jack plug, 200mm, and 1x dual RCA (phono) to 3.5mm stereo jack socket, 200mm.

AV-HK1X - Mono - XLR input and output

This is for use with a balanced, low impedance source and either a low or high impedance load. Input and output XLR connectors have gold-plated contacts.

The shield or ground (pin 1) connection of the input socket is electrically isolated from the case and from the output ground (pin 1) at audio frequencies. The ground connection of the output socket is connected to the case shield. The user audio source, such as a mixer, preamplifier or other professional audio product, connects to the AV-HK1X input. The module output is to be connected to the input of the grounded amplifier or mixer in the audio system. The input connector shield does provide a radio-frequency ground return, thereby preserving system immunity to radio interference.

Input: +4 dBu nominal. Response: 20Hz-50kHz, +/- 0.1dB. Distortion: Better than 0.15% THD+N, 20Hz- 20kHz, 150ohms source, 10kohms load; 0.002% at 1kHz. Output: +4 dBu nominal. Dimensions: 44.5 unmounted, 49.5 mounted x 73.7 x 82.6 (h x w x l) mm.

Included accessories: Mounting bracket.

AV-NH1 Headphone amplifier, 3.5/6.35mm jack socket output

This network to stereo headphone amplifier module converts two Dante network audio signals into a single stereo analogue headphone output. The front facing panel offers both 6.35mm and 3.5mm stereo headphone outputs, both offering 100mW into 100ohms, with a rotary output volume control. The AV-NH1 can be powered from an external and optional 24Vdc power supply or via PoE. Dante sample rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz can be selected.

AV-NL2 Output, 2x balanced XLR output

This network to audio interface converts two Dante network audio signals into two analogue balanced 3-pin XLR outputs. Switches located next to the outputs allow the user to select line level output, or attenuate by 50dB for mic level. The AV-NL2 can be powered from an external and optional 24Vdc power supply or via PoE. Dante sample rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz can be selected.

AV-NL4 Output, 4x balanced XLR output

NL4 has the same functionality at AV-NL2 however it has four balanced analogue outputs on 3-pin XLR.

AV-LN4 Input, 4x line level XLR input

RDL's AV-LN4 is the opposite of AV-NL4 in that it remains 4-channel however the input is analogue via line level 3-pin XLR, and the output it to Dante network.

AV-XMN4 Input, 4x XLR mic inputs, 48V phantom power

This interface convert up to four microphone input channels into Dante output. Each balanced 3-pin XLR input connection has an associated +48V phantom power, switch-selectable 40/48/62dB microphone gain, and dual-LED VU meter to monitor the input level.