Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

12 Januar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

LEN LAMR01 RELAY 2x1, Umschalter, 3x BNC, AES MADI ASI

Artikelnummer
90-6208
Hersteller
LEN
Typennummer
  • LAMR01
LEN LAMR01 RELAY 2x1, Umschalter, 3x BNC, AES MADI ASI
LEN LAMR01 RELAY 2x1, Umschalter, 3x BNC, AES MADI ASI

LEN SPLITTERS/FILTERS/RELAYS - AES, MADI, ASI

A series of AES, MADI, and ASI splitters, galvanic isolators and relays from LEN that aid the user create additional feeds, filter noise, or add switching.

AES/MADI/ASI Splitters

AES/MADI/ASI Galvanic Isolators

AES/MADI/ASI Relays


LAMR01 AES/MADI/ASI Relay

This is a miniature single-circuit, change-over relay, providing full broadcast quality switching, for data rates up to 360 Mb/s. It is suitable for applications such as power-failure switching and source selection. It can be used to choose between two inputs or to have a single input and choose between two outputs, controlled by a 5V DC applied to the coil. It is built in an ABS enclosure fitted with three female BNC connectors, with mounting screws, which are also used to connect to the coil, on the same face of the relay as the connectors.

Input and output impedance: 75 ohms. Return loss: 15dB, 0.1-360 MHz (1). Amplitude roll-off, 0.1-360 MHz: -0.3 dB (2). Insertion loss: 0.4 dB (3). Coil voltage: 5V DC, 80mA. Dimensions (LxWxH): 45 x 30 x 15mm, excluding connectors. Weight: 35g.
Note 1: Worst case. 2: Maximum attenuation. 3: Maximum loss, DC - 360MHz. All measurements are quoted with the relay energised.

Optional accessories: LMPR01 rack frame is a 1U 19-inch panel, finished in black, punched to take eight relays mounted from the rear by means of the mounting screws, the BNC connectors facing out of the rack. If it is desired to have the connectors facing into the rack, the relays may be reversed, revealing the relay modules which will protrude 15mm from the surface of the panel.