ANI22 - 2x mic/line in to Dante, 2x Dante to mic/line
This is an audio network interface that allows the user to convert up to two line or microphone signals to Dante, or two Dante audio channels to mic/line level outputs. Often used when an engineer requires control from a Dante browser based remote. An inbuilt parametric equaliser (PEQ) aids the engineer with speech intelligibility, noise reduction, and frequency response of connected audio channels.
Available in two configurations with either 3-pin XLR I/O (ANI22-XLR), or Phoenix style I/O (ANI22-BLOCK). Each has two inputs and two outputs located on the rear facing panel, along with a Dante connection on RJ45 for PoE and network audio transfer and control. The front facing panel has LEDs that illuminate to indicate signal/clip status of inputs 1 and 2, and outputs 1 and 2. There are also LEDs to indicate power, network, network audio, and encryption status.
Power consumption: 11W, maximum, PoE. Dimensions (HxWxD): 40 x 140 x 128mm. Weight: 672g.
Included accessories: Hardware kit and mounting bracket.
Optional accessories: CRT1 mounting kit enables the under-table or 19-inch rackmount fixing of up to three ANI interfaces. VCC3 cable kit can be used to interconnect audio from or to compatible equipment with 3.5mm jack connectivity.
ANI4IN - 4x mic/line in, Dante out
Similar to the ANI22 however ANI4IN has four analogue mic/line input channels and Dante only output. Each input channel is by way of 3-pin XLR input on the ANI4IN-XLR version, or Phoenix style input on the ANI4IN-BLOCK.
Included accessories: Hardware kit and mounting bracket.
Optional accessories: CRT1 mounting kit enables the under-table or 19-inch rackmount fixing of up to three ANI interfaces.
Power consumption: 10W, maximum, PoE. Dimensions (HxWxD): 40 x 140 x 128mm. Weight: 672g.
ANI4OUT - Dante in, 4x mic/line out
ANI4OUT is available with 3-pin XLR outputs (ANI4OUT-XLR), or Phoenix style outputs (ANI4OUT-BLOCK). This interface is the opposite of the ANI4IN in the way that it allows the input of four Dante audio inputs and four analogue mic/line level outputs on 3-pin XLR.
Specifications and accessories as per ANI4IN.
ANIUSB-MATRIX - 4x Dante in, 2x Dante out, 1x audio I/O, USB I/O
Designed to complement the ANI22, ANI4IN, and ANI4OUT, ANIUSB-MATRIX allows the user to connect four MicroFlex Advance microphone channels via Dante, along with a single analogue audio input and single USB audio source. The audio inputs can then be routed to outputs including Dante output, USB output, or audio output; with the addition of a deployable 4-band EQ on the analogue and USB outputs. Analogue I/O is via 3-pin Phoenix style connector.
Included accessories: Hardware kit and mounting bracket.
Optional accessories: CRT1 mounting kit enables the under-table or 19-inch rackmount fixing of up to three ANI interfaces. VCC3 cable kit can be used to interconnect audio from or to compatible equipment with 3.5mm jack connectivity.
Power consumption: 6.5W, maximum, PoE. Dimensions (HxWxD): 40 x 140 x 128mm. Weight: 668g.
P300 is an audio conferencing processor that allows the user to enhance the processing power and quality of a MicroFlex microphone system. IntelliMix P300 allows the user to connect multiple inputs including two microphones, a smart phone, or a computer via USB and link via a single Dante connection on RJ45 connector to facilitate setup and quality of a video or audio conferencing system. Integrated DSP includes echo cancellation, noise reduction, automatic mixing, and automatic gain control. Outputs can be connected to a local amplifier and speaker system if required.
The front facing panel has LEDs that illuminate to signify input signal/clip status for channels one and two, and output channels one and two status, along with power, network, network audio, encryption, and USB status. The rear facing panel houses all I/O including 3.5mm jack input for connection to a mobile device, two mic/line inputs on 3-pin Phoenix style connectors, two outputs on Phoenix connectors, USB, and RJ45 connection for Dante, audio over Dante, and PoE.
Included accessories: Hardware kit and mounting bracket.
Optional accessories: CRT1 mounting kit enables the under-table or 19-inch rackmount fixing of up to three ANI interfaces. VCC3 cable kit can be used to interconnect audio from or to compatible equipment with 3.5mm jack connectivity.
Power consumption: 17.5W, maximum, PoE. Dimensions (HxWxD): 40 x 210 x 226mm. Weight: 1710g.