Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

17 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

GLENSOUND BEATRICE B1 AUDIO INTERCOM Beltpack, Dante, 1-channel, 4-pin MXLR connector

Artikelnummer
95-9011
Hersteller
Glensound
Typennummer
  • BEATRICE B1
  • BEATRICE B1/4M
GLENSOUND BEATRICE B1 AUDIO INTERCOM Beltpack, Dante, 1-channel, 4-pin MXLR connector
GLENSOUND BEATRICE B1 AUDIO INTERCOM Beltpack, Dante, 1-channel, 4-pin MXLR connectorGLENSOUND BEATRICE B1 AUDIO INTERCOM Beltpack, Dante, 1-channel, 4-pin MXLR connectorGLENSOUND BEATRICE B1 AUDIO INTERCOM Beltpack, Dante, 1-channel, 4-pin MXLR connectorGLENSOUND BEATRICE B1 AUDIO INTERCOM Beltpack, Dante, 1-channel, 4-pin MXLR connector

GLENSOUND AUDIO INTERCOMS - Dante

Glensound Beatrice system is a range of network audio intercom devices utilising the Dante/AES67 network AoIP standards for transmission of real time uncompressed audio across networks. The range includes, beltpacks, desktops and rackmount units from 1-16 channels. There is also a number of peripheral units including a 'flasher' unit, a walkie-talkie interface, a 2 wire party line interface for RTS, Clearcomm and Tecpro, talkback wall plate positions, PoE amplifiers, PoE speakers and an intercom mixer - all on Dante/AES67 networks.

BEATRICE B1 - Single Channel, Beltpack

Glensound BEATRICE B1 is a single channel beltpack intercom designed for broadcast, theatre and professional audio applications. It was designed to be very easy to use for the operator and simple to set up for the technician. It includes the basic functionality required for small intercom systems and none of the complex installation requirements associated with larger systems.

A single bi-directional headset connection is on the rear of unit and is available with either 4-pin male XLR (Beatrice B1/4M) or 5-pin female XLR (Beatrice B1/5F) socket. This allows communication with one other circuit on the network. Depending upon how the Dante network has been routed the incoming audio circuits and outgoing circuits can be different locations. The rear also has an RJ45 Neutrik EtherCON for network connection to a PoE switch. This connection powers the unit and passes audio across a single network cable.

A ‘clear’ microphone amplifier, designed for communication purposes, is fitted. This also has the benefit of a compressor/limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. 12V phantom power is available and can be turned on/off as required. The headphone amplifier allows either low or high impedance headphones to be used, and automatically adjusts the output level to match the impedance of headphones in use. The headphone amplifier is stereo and sources can be panned to left or right ears as desired. The headphone amplifier can also drive mono earpieces from its stereo output without any performance issues.

The front facing panel features an easy to use volume control on a full size pot for adjusting the level in the headphones. When in configuration mode (using the side panel 'Update' button), this control can also be used to pan the incoming circuit to one ear or the other, adjust the sidetone level, turn phantom power on/off, adjust the incoming call level, toggle party mode on/off, or adjust the input gain. There is a 3-position talk switch which is ‘off’ when in the centre mode. When pushed down it is a momentary activation of the mic which will spring back to the centre off position when released. When pushed up the mic is locked on. A red LED indicates the unit is receiving a call signal - this will also be heard in the headphones. There is a mic active and power LED. Double tapping the talk switch sends a call signal from the Beatrice B1.

On the side panel with the ‘update’ button, there is also an external talk switch input on a 3.5mm jack socket. Bridging tip to sleeve on this socket will activate the Beatrice B1’s talk circuit.

Audio routing to/from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only one single incoming circuit for an incoming channel). An inbuilt party line/IFB facility allows the incoming circuit to be routed to the output circuit making a simple party line or IFB.

Included items: 2m RJ45 plug to plug cable.

Variants
Beatrice B1/4M 4-pin XLR male plug
Beatrice B1/5F 5-pin XLR female socket

Audio sample frequency: 48kHz. Mic gain: 60 to 20dB. Phantom power: 12V. EIN: 110dB. Headphone impedance: 32-1000 ohms. Band pass filter: 50Hz to 15kHz. Power consumption: 3 watts. Dimensions (WxLxH): 65 x 131 x 36mm. Weight: 648g

Dante Ultimo chipset. Audinate recommended not to use more than 10x Ultimo devices on a single network, unless there is a Broadway or Brooklyn device also on the network.

BEATRICE B2 - Twin Channel, Beltpack

BEATRICE B4 - Four Channel, Beltpack

BEATRICE B4+ - Four Channel, Beltpack

BEATRICE D4 - Four Channel, Desktop

BEATRICE D8 – Eight Channel, Desktop

BEATRICE D8+ - Eight Channel, Desktop with Analogue I/O Interface

BEATRICE D16 - Sixteen Channel, Desktop

BEATRICE R4 - Four Channel, Rack Mount

BEATRICE R8 - Eight Channel, Rack Mount

BEATRICE R16 - Sixteen Channel, Rack Mount

BEATRICE W1, W4 - Wall Mount Intercom

BEATRICE P1, P2 - Handset

BEATRICE M1 – Bi-directional, Walkie-talkie

BEATRICE LH4 – Indication Light