Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

19 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

SONIFEX RB-SM2 STEREO TO MONO CONVERTER Analogue, balanced, 2 stereo input

Artikelnummer
95-653
Hersteller
Sonifex
Typennummer
  • RB-SM2
SONIFEX RB-SM2 STEREO TO MONO CONVERTER Analogue, balanced, 2 stereo input
SONIFEX RB-SM2 STEREO TO MONO CONVERTER Analogue, balanced, 2 stereo inputSONIFEX RB-SM2 STEREO TO MONO CONVERTER Analogue, balanced, 2 stereo input

Bestellangaben

MwSt. / Versand
458,03 
pro Stück (zzgl. MwSt.)
Dieses Produkt wird speziell für Ihre Bestellung eingekauft, lieferbar in 4‑6 Wochen. Brauchen Sie diesen Artikel schneller? Rufen Sie uns an

ähnliche Produkte

SONIFEX REDBOX AUDIO/VIDEO PROCESSORS

Sonifex Redboxes were introduced in 1999 and were designed for systems integrators. They are very well received in both Broadcast and studio industries. The series of signal processors that include headphone amplifiers, mix-minus generators, silence detectors, tone generators, distribution amplifiers, audio converters and more, are built in two different extrusions, with front and rear panels screwed to the extrusion.

ACOUSTIC ECHO CANCELLERS

AUDIO CONVERTERS - A/D & D/A

AUDIO CONVERTERS - UNBALANCED TO BALANCED/BALANCED TO UNBALANCED

AUDIO CONVERTERS - STEREO TO MONO

Convenient building blocks to derive a mono output from a stereo input, perhaps for use to supply cue in broadcast environments or to feed a mono PA system for an annexe area where the main system is stereo.

All models are housed in red-anodised aluminium cases with apertures for fixing screws, they can be attached to any flat surface, or rack-mounted from the front with the standard front panels, or in reverse, with the rear panel facing out of the rack, using accessory panels.


RB-SM2 - Dual Converter

A dual balanced converter that allows the user to convert two independent stereo inputs to two fully buffered mono outputs.

The front panel is blank apart from a power indicator. The rear has four electronically balanced XLR input connectors which can be wired unbalanced for use with domestic equipment. There are two XLR output connectors, also electronically balanced, which may be wired unbalanced without level loss. It has an associated pre-set gain control with sufficient adjustment to produce a normalised 0dBu mono output from both line-level and domestic equipment. Power is applied to an IEC inlet, with adjacent fuse and voltage selector switch.

Input: 0dB nominal, +28dBu maximum, 20kohms. Common mode rejection: greater than 66dB. Gain: -8dB to +18dB. Response: 20Hz to 20kHz +/-0.1dB. Distortion: 0.01% THD, 1kHz, +8dBu output. Noise: -100dB, 0dB gain, +8dBu output. Output: +28dBu maximum, 50 ohms. Power source: 110-120V or 220-240V AC 6W maximum. Dimensions (WxDxH): 280 x 108 x 42mm. Weight: 1.05kg.

AUDIO EMBEDDERS AND DE-EMBEDDERS

CONTRIBUTION UNITS

DELAY SYNCHRONISERS

DIGITAL AUDIO DELAYS

DIGITAL VIDEO DISTRIBUTION AMPLIFIERS

DISTRIBUTION AMPLIFIERS

HEADPHONE AMPLIFIERS

ISOLATION UNITS

LIGHT SWITCHING UNITS

LIMITERS

MIX-MINUS GENERATORS

PREAMPLIFIERS

PROFANITY DELAYS

SAMPLE RATE CONVERTERS

SILENCE DETECTORS

SOURCE SELECTORS

TRANSMISSION SWITCHERS

TONE GENERATORS

ACCESSORIES