A range of cable management aids using the well established ‘hook and loop’ materials.
The successor to the original CableWrap. The Rip-Lock uses a section of hook material stitched to a section of loop with a fabric pull tab. One end of the CableWrap semi-permanently attaches to the cable, and can be released if required with the Rip-Lock Key. The fabric pull tab allows for easy opening with a good grip. Available in 4 sizes, all supplied in packs of 10. One Rip-Lock Key is supplied per pack.
A high quality re-usable cable wrap, using a section of hook material stitched to a section of loop with a fabric pull tab. The loop material is punched so that the tie can be fixed to the cable using a nylon cable tie (supplied). The loop material forms an effective strain relief against cable damage. The fabric pull tab allows for easy opening with a good grip. Available in 4 sizes.
Designed for applications where industrial strength or permanently fixed fastenings are not required, Rip-Tie Lite are a one piece double sided hook and loop fastener, 0.5 inches wide, with a slide-through eyelet to lock the fastener to the cable without the need of a nylon cable tie. When coiled, the remaining cable is held by wrapping the main length over itself in the usual way. Supplied individually and in packs of 10.
A one piece double sided hook and loop fastener, available in two lengths and two colours. At 0.25 inches wide, this is the smallest reusable Rip-Tie cable wrap, intended for smaller applications such as bundling and organising network cables, headphone cords or USB cables. Each wrap has a slide-through eyelet to lock the fastener to the cable without the need of a nylon cable tie. When coiled, the remaining cable is held by wrapping the main length over itself in the usual way. Supplied in packs of 14.
CableCatch
Used to organize cables against a surface, behind equipment consoles, racks or desks. The CableCatch consists of hook and loop materials facing each other with a strong self-adhesive fixed to the back of the loop material. The hook material has a nylon fabric pull tab for easy release. CableCatches are well-suited for location and OB work, where CableCatches may be fixed to equipment for connector strain relief and neatness, or for studios which use a lot of hired in equipment that is changed out often. Available in 3 sizes.
A custom pull-tab printing service is available for orders over 1,000 pieces (mixed types). Please ask sales staff for details. Standard Rip-Ties are available in a range of other colours to special order, minimum quantity 100 pieces per colour.
These heavy-duty utility straps fix more securely to rough surfaces and has a stronger, pulley-type closure mechanism to take heavier loads. The strap is secured to a surface using a suitable screw or other fastener through one or two metal eyelets, depending on model, allowing the strap to hang below. The cable bundle is placed against the strap. The end of the strap, which has a length of hook material is brought underneath the bundle, up and through a buckle, then down to lock on the loop material of the strap.
A low cost solution where the extra benefit of pull tabs, screw mount holes, etc. are not required. The WrapStrap is a single strip of double sided hook and loop fastener that quickly and easily wraps around almost anything. Available in individual 12 inch x 1 inch strips, or in four widths, on rolls of 15 feet for standard black or 75 feet for plenum-rated cranberry. The WrapStrap is particular suited to modern digital signal cabling that should not be wrapped with nylon ties, to preserve signal integrity. Plenum-rated type complies with UL94-V2, FAR 2.5 853 A/B, and NEC Section 300-22 (C) & (D).
RipWrap offers all the holding power of gaffer tape, but with none of the gummy residue. Intended for use in theatre, photography, film and television environments, amongst many others. The polyester construction also makes this wrap useful for marine and outdoor applications. Available in four widths, on 30 feet rolls.
Where semi-permanent fixing of equipment is required, ‘RipSpots’ are ideal. These are simply self-adhesive circular spots of hook and loop material, which may be used to secure equipment that must be dismantled for transportation, or stored for security. Also a good way to fix control panels in studios which may need to be removed for servicing at short notice. Diameter 35mm, supplied in packs of 10 pairs.
Designed to deal with the classic problem - how to easily distinguish one cable from another. Labels can be rotated 360 degrees for easy viewing even in hard to reach areas and are easy-to-install, interchangeable and reusable. Write directly on the surface with a marker pen or add your own printed label. Available in 6.0 inch (max bundle diameter, 1.0 inch) and 7.0 inch (max bundle diameter, 1.25 inch) variants. Supplied in packs of 10.