Verkauf : +44 191 418 1198 Email : verkauf@canford.de
A range of cable management aids using the well established ‘hook and loop’ materials. Rip-Lock CableWrap The successor to the original CableWrap. The Rip-Lock uses a section…
Standard series Another form of re-usable cable tie, based on the well established ‘hook and loop’ materials. Ties have a centre closed section of hook and loop which can be…
This sleeving consists of heat stabilised polyester, braided in such a way as to allow the diameter to expand by a minimum of 60% either by compressing the sleeving or by the…
Similar in construction to the standard expandable braided sleeving, but manufactured in PET of various colours. Supplied cut to length as required, and charged according to the…
This sleeving offers the look of polished stainless steel braid, but is made from woven, metallised-mylar, expandable mesh. The standard ‘Chrome’ version has a more ‘open’ look…
This sleeving consists of polyethylene terepthalate (PET) filaments braided in such a way as to allow the diameter to expand by 70% either by compressing the sleeving or by the…
This resin-coated sleeving consists of polyethylene terephthalate (PET) and nylon polyamide filaments for 'superior strength', braided in such a way as to allow the diameter to…
This sleeving consists of polyethylene terepthalate (PET) plus a small proportion of high friction polymer filaments braided together. It is specifically designed for cable…
The longitudinally split construction of this semi-rigid braided sleeving permits the tube to be opened up and fitted over a cable loom. It springs back closed, with a nominal 25%…
This is similar to standard expandable braided sleeving, but uses hook-and-loop tape along its length to close it. This makes it ideal for both new and existing cable looms and…
These cable-tidy tubes, fabricated from LDPE, offer a neat way of organising a cluster of cables, intended for applications such as behind desks or TVs. The tube has a split down…
Polyethylene spiral used to bind cable forms. The design enables cables to enter the loom at any point along its length. Often used for composite looms in equipment or racks…
Heat shrinkable transparent polyelefin semi-rigid, gloss surface, thin walled sleeving, shrinks to 50% of original diameter. Designed for applications requiring a very thin walled…
Heat shrinkable cross-linked polyolefin flexible sleeving, derived from polyethylene, shrinks to 50% of it’s original diameter. Designed to provide a strong flexible protection…
Semi-flexible laminated cross-linked polyolefin heat shrink tubing, internally coated with adhesive, which as the sleeve shrinks, melts and seals the components or cables…
This polyolefin heat shrink tape combines the advantages of heat shrinkable sleeving and moulded shapes, having the facility to be wrapped around irregular shapes and profiles…
Suitable for use with most types of heat-shrink sleeving products, this 1600W, 230VAC hot air tool operates at two speeds and temperatures, of 240 l/min at 300°C or 450l/min at…
Green silicone sleeving, commonly used for insulating screen drain wires. Available with 1mm, 2mm or 3mm internal bore. Priced and sold as coils of 50 metres.
Neoprene cable binding sleeves in a range of sizes and colours. Unlike Hellermann sleeves, these are pre-lubricated and therefore do not usually require additional lubricant. …
Chloroprene cable binding sleeves from Hellermann in a range of sizes and colours. Temperature range -65 Degrees Celsius to +95 Degrees Celsius. Easily expand to at least 75%…
A selection of sleeve-fitting tools to suit a range of applications. KP series A design of sleeve expander, which is smaller and lighter in weight than other designs and has…
Canford Audio Limited ist im Gesellschaftsregister von England und Wales eingetragenHandelsregister Nr. 1385727Umsatzsteuer Identnummer: GB 660 1163 71
