Verkauf : +44 191 418 1198 Email : verkauf@canford.de
Eine Reihe von XLR-Kabelsteckverbindern mit niedrigem Profil, die speziell für Anwendungen konzipiert sind, bei denen eine geringe Größe entscheidend ist. Diese Steckverbinder…
A selection of push-fit protective rubber covers designed to fit most cable or panel connectors including XLR, EtherCon, or OpticalCon. Canford Protective Rubber Cap These…
This handy device, designed by Canford Audio after a customer suggestion (yes, we do read them!), simplifies mounting Universal series connectors on smaller or custom-made panels…
Moulded plastic plates designed to blank off unused holes punched for Neutrik 'A' or 'B' series XLR connectors (22 mm hole). They are designed for metalwork prepared for, and to…
Moulded plastic and metal plates designed to blank off unused holes punched for Neutrik ‘D’ series XLR, jack and loudspeaker connectors (24 mm hole). 40-299 has M3 metal threaded…
A range of connectors, switches and cable glands mounted on insulating mouldings which fit the Neutrik ‘D’ series cut-out. Suitable for use with Canford Universal Connection…
Moulded plastic plates fitted with cable glands designed to be used on panels with holes punched for Neutrik ‘D’ series connectors (24 mm hole). Providing an effective and robust…
Neutrik XLR 5-pin male and female panel connectors with adapter to provide either an RJ45 socket or IDC connection at the rear. These are suitable solely for rear of panel…
Die ultimative Lösung für jeden Techniker. Zwei oder drei Anschlüsse als Federklemmen auf der einen Seite sowie XLR- oder alternative Steckverbinder auf der anderen Seite. Für…
Hexagonal box with positions for three Neutrik ‘D’ size or Canford Universal Series connectors (not suitable for Powercon connectors), allowing Y-splitters or T-pieces to be made…
The popular, industrial DIN-rail mounting system allows terminals and other equipment to be mounted easily, and this handy frame helps this system to be integrated with 19” rack…
A range of 2 pole plugs and sockets to PO ("Post Office") design, usually used in conjunction with 4.1mm connection panels (also known as "U-link panels" and "Test Tablets")…
A modified version of the standard 3.5mm 3-pole plug, with an threaded locking-ring added, to enable a secure mating with those 3.5mm sockets which have an external screw thread…
Hexagonal moulded boxes fitted with three Neutrix ‘Speakon’ NL4 connectors, fully wired in parallel to carry 30 Amps. Moulded from virtually unbreakable black ABS plastic…
Das Canford RJ45 Gehäuse ist eine robuste Lösung mit Verriegelung, das mehr Schutz als herkömmliche RJ45-Anschlüsse bietet. Das charakteristische Verriegelungsdesign des Gehäuses…
These are based on two Canford custom moulded plastic components, and provide connectors which use the same (24mm diameter) panel mountings as the Neutrik ‘D’series XLR…
Panel-mounting double-sided BNC connectors (also known as “back-to-back” or “bulkhead through-adapter”), designed and manufactured by Canford specifically for the professional…
Moulded plastic strain reliefs for use with BNC and MUSA crimp connectors. “Groups” refer to Canford Cable Groups, see Coaxial Connectors Selection Guidance entry. All types are…
Moulded plastic plates, similar to the Canford 40-991 D-series blanking plate, designed to accept a BNC connector. 13mm hole with anti-rotation flat. They are designed for…
Moulded plastic strain reliefs for use with Micro BNC and DIN1.0/2.3 crimp connectors. 'Groups' refer to Canford cable groups (see Coaxial connectors selection guidance). All…
Neue Brückenstecker wurden zur Verwendung unserer exkusiven microMUSA Video Steckfeldern entwickelt, diese eignen sich zur Übertragung von 12G 4K UHD (2160P60), hochauflösende 3G…
3GB/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, analoge- und digitale AES-Audiosignale, unsymmetrisch, 75 Ohm Das MUSA-System (Multi-User Steerable Array System) war ursprünglich von…
3GB/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, analoge- und digitale AES-Audiosignale, unsymmetrisch, 75 Ohm Diese MUSA HD/BNC HD Einzeladapter für Steckfelder entsprechen den…
Diese Einzeladapter entsprechen den Anschlüssen der MUSA HD Steckfelder. Sie basieren auf einer vollständig neu entwickelte Version des MUSA-Systems, die für 12G UHD neu entworfen…
3GB/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, Analog und Unsymmetrische AES-Audioverbindungen mit 75 Ohm Diese neuen MUSA-Brückenstecker wurden für Anwendungen mit hochauflösenden…
Originally invented by the British Post Office (GPO) to patch experimental radar the 'Multi-User Steerable Array' system was abbreviated to MUSA and is now a standard connector…
High quality, industry standard, 3 pin 13 amp BS1363-2 sockets, robust enough to withstand the rigours of use in commercial environments. This reverse mount panel socket, with a…
These AC mains power distribution strips, with a single power inlet, offering 14 IEC outlets, are designed to mount vertically or horizontally within the rear of a rack, inside…
A range of rackmount power distribution units available with a variety of connector types. All units have extruded aluminium housing, and are finished in black. All types have a…
This range of twelve, fourteen, fifteen or Twin 7 way, IEC or Powercon outlet, AC mains power distribution panels are housed in a compact 1U rackmount case. Loop-out feature…
This range of twelve, fourteen, fifteen or Twin 7 way, IEC or Powercon outlet, switched AC mains power distribution panels are housed in a compact 1U rackmount case. Loop-out…
This range of twelve, IEC or Powercon outlet, sequential "switch-on" or "switch-on and switch-off" AC mains power distribution panels are housed in a compact 1U rackmount case…
This range of twelve, IEC or Powercon outlet, filtered AC mains power distribution panels are housed in a compact 1U rackmount case. Loop-out feature models, provide an…
This range of twelve, IEC or Powercon outlet, filtered, sequential "switch-on" or "switch-on and switch-off" AC mains power distribution panels are housed in a compact 1U…
This range of twelve-way, IEC outlet, AC mains power distribution panels are housed in a compact 1U rackmount case. Loop-out feature models, provide an un-switched, direct…
These guard plates may be fitted to Canford MDUs at the time of installation or retrospectively, to avoid units being accidentally switched off (or on). The central cut out gives…
This device is useful where the current drawn from the mains supply by a piece of equipment at switch-on (eg. an audio power amplifier) is considerably higher than the steady…
A large range of plates designed to fit BS4662 and BS1363 standard electrical flush or surface boxes. Plates are supplied with mounting holes for 1, 2, 3, 4, 6 or 8 connectors in…
A range of connector plates supplied with connectors ready fitted. Type SN - Metal, satin nickel Flat 1.5mm thick steel plates, with rounded corners. Plates are finished in…
Designed for surface mounting on walls etc., these are small black impact resistant ABS boxes, (75mm × 56mm × 35mm) fitted with an XLR 3 pin female connector (NC3FDL1), XLR 3 pin…
Surface wallmount boxes, protected to IP55. Female or male 3 pin XLR connector (NC3FDL1, NC3MDL1), or Neutrik loudspeaker connector (NL4MP) in plastic box, with sprung hinged lid…
The Canford AV modular connection system is an extensive, unified range of faceplates and snap-in modules. Suited to environments such as classrooms, conference rooms and meeting…
Stainless steel hinged flap plates, with sprung hinged-flap. Mounting holes to fit standard BS electrical flush boxes BS1363 or BS4662. Available fitted with a non-latching XLR…
Heavy duty steel floorbox (also known as a ‘Stage Dip Box’) for recessed mounting into solid and wood floors. The top half of the box has an upper lip, which rests on or flush…
Multifunktionale Anschlussfelder mit 1 HE für die Schnellmontage der Anschlusskonfigurationen ohne Spezialwerkzeug oder umständlichen Muttern. Diese Anschlussfelder werden aus 2…
Multifunktionale gerade oder geneigte Anschlussfelder in einer nahezu unendlichen Anzahl möglicher Konfigurationen. Dank des „Universal Connection Systems“ lässt sich eine große…
Multifunktionales Economy-Anschlussfeld, 1 HE, 16 Ausschnitte, mit Halterung für einen Papierbeschriftungsstreifen mit einrastender Abdeckung und eine Führungsleiste zur Verlegung…
Auf Basis der “Canford Universal Connection Panel” Serie ermöglichen diese multifunktionalen Anschlussfelder mit halber Rackbreite unzählige Konfigurationen. Dank des „Universal…
Diese multifunktionalen Anschlussfelder sind für den Einsatz mit zahlreichen Keystone-Anschlussformaten in fast jeder denkbaren Kombination geeignet. Die aus leichtem, aber extrem…
These multipurpose connection panels are suitable for use with a range of industry-standard keystone connectors, allowing an almost infinite number of possible configurations. The…
Multifunktional nutzbare, modulare Anschlussfelder in einer nahezu unendlichen Anzahl möglicher Konfigurationen. Diese Anschlussfelder wurden auf Basis des etablierten „Universal…
A series of rugged steel stageboxes offering a vast range of connection possibilities when fitted with ‘Universal’ series connectors on the top plate and popular multicore…
Eine Reihe von robusten, trapezförmigen Stageboxen, die entweder mit unbestückten oder bestückten Kombinationen bis zu 24 D-Serie-Steckverbindern geliefert sind. Jede Stagebox…
Diese Baureihe mit robusten Breakout- oder Stageboxen wurde für den zuverlässigen Einsatz im anspruchsvollen Tour-Alltag konzipiert. Die zwei erhältlichen Typen sind wahlweise mit…
Eine Reihe von geraden und geneigten Audio-Anschlussfeldern mit vollständiger Bestückung mit Neutrik-XLR-Chassis-Produkter der D-Serie, allesamt Neun Kombinationen mit dreipoligen…
A range of 2U Audio splitter panels supplied fully populated (non-wired), with 2off 37 pin Tourline connectors and 2 rows of 12 Neutrik ‘D’ series 3-pin XLR female and male…
A series of rugged steel wallboxes offering a vast range of connection possibilities when combined with ‘Universal’ series connectors. A robust, folded chassis forms the basis for…
A series of rugged steel wall boxes offering a vast range of connection possibilities when combined with ‘Universal’ series connectors. A robust, folded chassis forms the basis…
1U black painted rigid extrusion fitted with 2 rows of 32 sockets, 4.1mm type spaced both horizontally and vertically to enable them to be used with all standard PO type 4.1mm…
A range of 1U Speakon termination panels supplied fully populated with Neutrik ‘D’ series Speakon loudspeaker connectors. Available with 8 or 12 connectors fitted as…
Diese Rackblenden im 19"-Rackformat dienen als Träger für eine Vielzahl an Audioanschlüssen an der Außenwand von Ü-Wagen, in Studios und an Veranstaltungsorten (wie Stadien) sowie…
Diese zweireihigen Anschlussfelder werden aus robustem Aluminium-Profil (1 HE) mit hellgrauer ‚Dawn Grey‘ oder schwarzer Pulverbeschichtung bzw. anodisierter, glatter Oberfläche…
Two, three and four-row MUSA panels, offering a 75ohm coaxial patching solution for unbalanced AES audio. Available with 20, 24 or 26 connectors per row in 1U panels and 20 or 24…
Canford Audio will supply jackfields prewired to customers’ specifications, at competitive prices. Terminations will usually be to PO tag blocks, Krone blocks or multiway…
Mit zwei Reihen von Steckverbindern in einem 1HE Panel, jede Reihe entweder 16, 20 oder 24 Steckverbindern - je abhängig von dem Modell, können diese ‚Ultra High Definition‘…
Mit zwei Reihen von Steckverbindern in einem 2HE Panel, jede Reihe nach unten geneigt und mit entweder 12, 16, 20 oder 24 Steckverbindern - je abhängig von dem Modell, können…
Mit einer, zwei, drei oder vier Reihe(n) von Steckverbindern in einem 1HE, 2HE oder 3HE Panel, jede Reihe mit entweder 12, 16, 20 oder 24 Steckverbindern - je abhängig von dem…
Canford ergänzt das Programm mit einer Reihe von 16, 20 oder 24 Steckverbindern in einem 1HE Anschlussfeld - abhängig von dem Modell, können diese economy ‚Ultra High Definition‘…
Mit zwei Reihen von Steckverbindern in einem 1HE Panel, jede Reihe mit entweder 16, 20, 24, 32 oder 48 Steckverbindern - je abhängig von dem Modell, können diese ‚Ultra High…
With two rows of connectors in 1U panels, each row with 16, 20, 24, 32 or 48 connectors, depending on model, these 3G HD-SDI termination panels are intended for 3G and 1.5G high…
Canford ergänzt das Programm mit einer Reihe vollständig bestückter 19" Anschlussfelder mit isolierten, doppelseitigen Canford 50-Ohm-BNC-Buchsen. Die Anschlüsse sind gleichmäßig…
Eine Auswahl vollständig bestückter Anschlussfelder mit doppelseitigen F-Typ-Kupplungen. Typischer Einsatz bei der Verteilung von RF-Signalen, CATV und CCTV. Standardmäßig sind…
Eine Baureihe mit vollständig bestückten Anschlussfeldern mit Feedthrough-DVI-Buchsen (doppelseitige Back-to-Back-Bestückung), die eine einfache Systemverkabelung und von mobilen…
Aufgrund der steigenden Nachfrage für 4K Infrastruktur-Komponenten hat Canford diese exklusive Palette von Video-Steckfeldern entwickelt, die für 12G 4K UHD (2160P60) als auch für…
3Gb/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, Analog und Unsymmetrische AES-Audioverbindungen mit 75 Ohm Diese Steckfelder mit 32 MUSA-Anschlusspunkten bieten die höchstmögliche…
3GB/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, Analog und Unsymmetrische AES-Audioverbindungen mit 75 Ohm Diese neuen MUSA-Buchsen wurden für Anwendungen mit hochauflösenden 3G und…
3GB/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, Analog und Unsymmetrische AES-Audioverbindungen mit 75 Ohm Diese 2HE Panels sind in drei Reihen mit bis zu 24 MUSA HD 3 Gbit/s Buchsen…
Manufactured from a rigid aluminium extrusion with cut outs to accept up to twelve 9 pin D-sub cable termination connectors. Fitted with a cranked lacing-bar giving easy access to…
A range of 1U data termination and patching panels supplied fully-populated with Neutrik latching metal-shell Ethercon connectors. The Ethercon was designed for data transfer…
A range of panels supplied with CAT5e or CAT6 or CAT6A, screened or unscreened RJ45 connectors, in feedthrough or IDC format, enabling system patching and easy connection of…
Auslieferung in Vollbestückung mit ungeschirmten RJ45 CAT5E Feedthrough-Buchsen (doppelseitige Back-to-Back-Bestückung) zur Systemverkabelung und leichten Einbindung von mobilen…
Auslieferung in Vollbestückung mit geschirmten RJ45 CAT5E Feedthrough-Buchsen (doppelseitige Back-to-Back-Bestückung) zur Systemverkabelung und leichten Einbindung von mobilem und…
An economy range of panels supplied fully populated with feedthrough (also known as double-sided or back-to-back) RJ45 CAT5E, CAT6 or CAT6A sockets enabling system patching and…
Auslieferung in Vollbestückung mit ungeschirmten RJ45 CAT6 Feedthrough-Buchsen (doppelseitige Back-to-Back-Bestückung) zur Systemverkabelung und leichten Einbindung von mobilen…
Auslieferung in Vollbestückung mit geschirmten RJ45 CAT6 Feedthrough-Buchsen (doppelseitige Back-to-Back-Bestückung) zur Systemverkabelung und leichten Einbindung von mobilem und…
Auslieferung in Vollbestückung mit geschirmten RJ45 CAT6A Feedthrough-Buchsen (doppelseitige Back-to-Back-Bestückung) zur Systemverkabelung und leichten Einbindung von mobilem und…
A range of panels supplied with screened RJ45 CAT6A IDC sockets, enabling system patching and easy connection of portable or external equipment. These ‘Tool-less’ sockets have IDC…
A range of DMX termination panels supplied fully populated with Neutrik ‘D’ series 5-pin XLR connectors. Available with 8, 12 or 16 XLR male or latching female connectors fitted…
Designed with Neutrik opticalCON in mind but equally suited to front mounting any Canford Universal or industry standard D series connectors. These 1U 8 way, 12 way and 16 way…
A range of 1U 19 inch rackmount cases supplied fully populated with Neutrik opticalCON Advanced Duo connectors, with each connector housing four 6A, 50V AC, rated solder contacts…
Diese kompakten Rackgehäuse basieren auf unseren Standardprodukten für die Feldterminierung. Mit einer Gehäusetiefe von nur 100 mm stellen diese Gehäuse eine platzsparende Lösung…
Die von Canford entwickelten und gefertigten montierbaren Gehäuse bieten eine schnelle, einfache und effektive Lösung für die Rackmontage von bis zu vier SMPTE 311…
Ausgestattet mit CO2-und Glasfasertechnologien kann die Canford-eigene, hochmoderne Laserbeschriftungsmaschine eine Vielzahl von Materialien und Ausführungen markieren oder…
Dank unserer umfangreichen Erfahrung im Siebdruckverfahren bieten wir dieses Verfahren wenn Sie Ihr Produkt eindeutig identifizieren, fördern oder beschriften möchten. Canford…
Canford bietet einen kundenspezifischen Siebdruck-Service für eine Reihe eigener Qualitätsrackblenden an, die seiner Kundschaft ermöglicht, jegliche Installation durch ihr eigenes…
Stahl Stecker-Montageplatten, die in metallen Wandkästen passen, sind erhältlich. Solche Wandkästen werden in Sportsstadien, Arenen, Theater, Schwimmhallen, Pferderennbahnen oder…
Dank eigener Bearbeitungszentren sind wird in der Lage, Steckfelder mit maßgeschneiderter Bestückung innerhalb kürzester Zeit zu liefern. Zu den möglichen Einsatzgebieten zählen…
Dank eigener Bearbeitungszentren und Pulverbeschichtungswerkstatt sind wird in der Lage, AV Wand-, Decke- und Bodenbox- Anschlussplatten für individuellen Projektanforderungen…
These pre-terminated, singlemode LEMO F2 Fibre patchcords can be used without the need for epoxy, or polishing, when utilised for fibre splicing and panel repairs. Installation…
Eine Baureihe mit Glasfaser-Steckfeldern, komplett bestückt mit den industrieerprobten SENKO LC-Glasfaser-Durchgangskopplern. Sie verfügen über Klemmringe aus Zirkonoxid (SM) oder…
Eine Baureihe mit Glasfaser-Steckfeldern, komplett bestückt mit den industrieerprobten SENKO SC-Glasfaser-Durchgangskopplern. Sie verfügen über Klemmringe aus Zirkonoxid (SM) oder…
Glasfaser-Steckfelder, vollständig bestückt mit den industrieerprobten SENKO ST-Glasfaser 'Feedthrough'-Modulen. Sie verfügen über Klemmringe aus Zirkonoxid (SM) oder…
Eine Baureihe mit Glasfaser-Rackgehäuse, komplett bestückt mit den industrieerprobten SENKO LC-Glasfaser-Durchgangskopplern. Sie verfügen über Klemmringe aus Zirkonoxid (SM) oder…
A range of broadcast-style, fibre termination patch-panels with integral rear case for fibre management. Panels are supplied fully-populated with industry-approved Senko SC fibre…
A range of broadcast-style, fibre termination patch-panels with integral rear case for fibre management. Panels are supplied fully-populated with industry-approved ST fibre…
Die von Canford entwickelten und gefertigten Gehäuse bieten eine schnelle, einfache und effektive Lösung für die Rackmontage von bis zu acht Lemo 3K.93C FXW oder EDW Lemo SMPTE…
Die von Canford entwickelten und gefertigten Installationsgehäuse ermöglichen eine schnelle, einfache und effektive Terminierung von bis zu acht SMPTE 311 Infrastrukturkabeln ohne…
Überall dort, wo mehrkanalige Glasfaserkabel mit Lemo SMPTE304 Anschlüssen für Punkt-zu-Punkt-Verbindungen genutzt werden, können mit diesen Breakout-Boxen zwei oder zwei…
Überall dort, wo mehrkanalige Glasfaserkabel mit opticalCON Dual oder opticalCON Quad Anschlüssen für Punkt-zu-Punkt-Verbindungen genutzt werden, können mit den Canford…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Canford PU SMPTE Standardkabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Canford TPE flexibles SMPTE Standardkabel. Sie werden…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Percon FO311PROF PU SMPTE Standardkabel. Sie werden…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Belden 7804EPU SMPTE Standardkabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Draka PU SMPTE Standardkabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Draka PU hochflexiblen SMPTE kabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem OCC (Optical Cable Corporation) SMPTE Standardkabel…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Furukawa SMPTE oder ARIB Standardkabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Furukawa SMPTE oder ARIB Leichteskabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem miniaturisierten, speziell für den Einsatz mit…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Canford 9,2mm PUR SMPTE Standardkabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Canford 9,2mm TPE, flexibles SMPTE Standardkabel. Sie…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Belden 7804EPU 9,2mm SMPTE Standardkabel. Sie werden…
Diese Hybrid-Glasfaser-HD-Kamerakabel entsprechen dem Industriestandard und verbinden Lemo SMPTE304 Steckverbinder mit einem Draka 9,2mm PU SMPTE Standardkabel. Sie werden auf…
Diese Hybrid-Glasfaser-HD-Kamerakabel-Breakout-Konfektionierungen mit Lemo SMPTE304 Steckverbindern entsprechen dem Industriestandard und sind in unterschiedlichen Versionen…
Diese Hybrid-Glasfaser-HD-Kamerakabel-Breakout-Konfektionierungen mit Lemo SMPTE304 Steckverbindern entsprechen dem Industriestandard und sind in unterschiedlichen Längen auf ST…
Diese HMA konfektionierte Breakout-Kabel verwenden Fibreco Junior Expanded Beam Steckverbinder und werden in verschiedenen Versionen angeboten – siehe Produktbeschreibungen…
These HMA cable breakout assemblies use Fibreco Junior expanded beam cable connectors and are offered in a variety of lengths to ST, SC and LC fibre connections. The Junior…
Diese robuste Glasfaserkabel mit Linsenglasfaser-Steckverbindern entsprechen dem Industriestandard. Sie verwenden ‚tight buffered‘ taktisches Kabel von Belden, der…
Where multi-way fibre cables, fitted with Lemo SMPTE304 connectors, are used to provide a point-to-point link, these break-out boxes split two-channels to a variety of other…
Custom cable termination Recognising that stocking cable assemblies in all possible combinations of cable type, connector type, colour and length would be impossible (and in fact…
Vorkonfektionierte, einsatzbereite Kabel. HST Kabel: ist ein universales hoch flexibles Kabel, OFC und verdrillten Schirm. Jedes einzelne Kabel ist ausführlich in einer…
Prewired cables, ready for use. HST general-purpose, extra-flexible, OFC, screened twisted-pair cable. Each individual cable is described in detail by the use of an abbreviated…
Prewired cables, ready for use. HST-R Ruggedised, flexible, screened twisted-pair cable. Each individual cable is described in detail by the use of an abbreviated sequence in the…
Prewired cables, ready for use. Starquad cable for increased rejection of external electrical noise. Particularly suitable for balanced microphone signals. SQ versions are PVC…
Prewired cables, ready for use. Suitable for use with stereo microphones. MSJ-3 polyurethane jacketed cable. Only two pairs wired. Each individual cable is described in detail by…
These DMX 3-pin XLR to XLR cables are made using Canford's HST110, high performance extra-flexible twisted twin conductor, helical screened cable, with an impedance of 110/120…
These DMX 5-pin XLR to XLR cables are made using Canford's HST110, high performance extra-flexible twisted twin conductor, helical screened cable, with an impedance of 110/120…
One of the properties of polyurethane when used as a cable jacket material (apart from its exceptional durability) is a high degree of “memory”. This means that coiled cables can…
These pre-wired microphone input cables are for use with most camera and portable recorders. Portable Recorder Microphone cables Nickel XLR 3-pin female for the microphone…
These pre-wired audio output cables are for use with most small portable audio recorders, iPods, phones, radiomics and IEM receivers. Black XLR 3-pin male for mixer or other…
Prewired cables, ready for use. HST-R-M general-purpose miniature, heavy-duty, extra-flexible, screened twisted-pair cable. Each individual cable is described in detail by the…
Screened patchcables fitted with a bantam type jack plug at one end and an XLR 3-pin at the other. Cable is 2 cores of 7 strand tinsel (able to withstand almost infinite flexing)…
This permits standard ‘stereo’ wired headphones to be used to monitor sources on B-gauge jackfields that are wired to the usual tip=A leg, ring=B leg, sleeve=screen balanced line…
Headphone extension cables, in a variety of connector configurations. Type Plug Socket 3MJP-3MJS 3.5mm 3.5mm 3P-3J NP3X (A-gauge)…
Prewired cables, ready for use. HSS cable for ultra-low mechanical noise with low level signals. Each individual cable is described in detail by the use of an abbreviated…
Screened patchcords fitted with two Switchcraft B-gauge jack plugs. Cable is 2 cores of 7 strand tinsel (able to withstand almost infinite flexing), with overall braided screen…
These cords combine the high quality Neutrik NP3TT1 bantam jack plug with the proven performance of Canford Audio’s own HST-R-M screened cable. This cable has an incredibly tough…
Prewired cables, ready for use. All pins wired in parallel. HST general-purpose, extra-flexible, screened twisted-pair cable. Used for splitting audio signals. Each individual…
Prewired cables, ready for use. Wired unbalanced stereo at the 3.5mm 3-pole moulded jack. Moulded "Y" split in cable. Coloured glands identify Red for A leg or left leg and Green…
Prewired cables, ready for use. Wired for stereo (AB or MS use). Used to convert 5-pin stereo circuits to dual 3-pin circuits (coloured glands identify Red for A leg or M leg and…
With the increase for the need to work from home, team meetings and video conferencing, Canford introduce a range of prewired Y cables, ready for use. Wired for laptop input with…
Prewired cables, ready for use. Wired unbalanced stereo at the 3.5mm 3-pole moulded jack. Moulded “Y” split in cable. Coloured glands identify Red for A leg or left leg and Green…
Prewired cables, ready for use. Extra-flexible purpose-designed multicore cable, with industry-standard Neutrik 'Speakon' connectors. Available in 2.5 sq.mm conductor (MCS) and 4…
Suitable for AES and analogue audio, these are wired to the ubiquitous Tascam 'DTRS wiring convention', using Belden 110 ohm, low-capacitance, individually screened, eight-pair…
Prewired cables, ready for use. Multiquad cables wired to UK broadcast pattern. Each individual cable is described in detail by the use of an abbreviated sequence in the…
These cables break out from the 26-pin MIL connectors widely used by UK broadcasters and facilities companies, and are wired to the standard (originally BBC) pin convention. These…
These cables break out from the 25 and 37-pin connectors widely used by sound re-inforcement and broadcast facilities companies. Currently using Tourline connectors by Ten47, they…
Prewired cables, ready for use. Multipair cables wired to UK broadcast pattern. Each individual cable is described in detail by the use of an abbreviated sequence in the…
A range of patchcords and patchcables, using fabric covered tinsel cable. Plugs are the Canford 4.1mm 2 pin 231A type, and Switchcraft B-gauge 3-pole jacks with black…
These are suitable for both digital and analogue, video and audio signals, and use Canford's SDV-F flexible low-loss digital video cable. The Canare RCAP-series crimp RCA (phono)…
There are two types of Krone access plug for 237 series modules – two pole listen only (does not break the circuit) and 4 pole, which can be used to break or listen, depending on…
Prewired cables, ready for use. HST-M extra-flexible, screened twisted-pair cable. Each individual cable is described in detail by the use of an abbreviated sequence in the…
Geeignet für 3Gb/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, analoge und unsymmetrische AES-Audioverbindungen mit 75 Ohm. Eingesetzt wird das flexible, verlustarme Digital-Videokabel…
Sofort einsatzbereite Kabel, vorkonfektionierte mit Canford SDV-L verlustarmen, digitalem Videokabel und 3G HD BNC Crimpensteckverbindern. Erhältlich in zwei verschiendenen…
Prewired cables, ready for use. Manufactured using Canford SDV-F-HD Heavy duty and flexible digital video cable, designed specifically for deployable applications and Neutrik 3G…
Vorkonfektionierte und sofort einsatzbereite Kabel. Bestimmt sowohl für 12G 4K UHD, als auch für hochauflösende 3G- und 1,5G-Standardauflösungen sowie analog Videoanwendungen. …
Prewired cables, ready for use. Intended for 3G and 1.5G high definition, standard definition and analogue video applications. Manufactured using Percon VK 5065, VK 8065 and…
Prewired cables, ready for use. Intended for 3G and 1.5G high definition, standard definition and analogue video applications. Manufactured using Canford's SDM-R Ruggedised…
Prewired cables, ready for use. Intended for 12G 4K ultra high definition, 3G and 1.5G high definition, standard definition and analogue video applications. Manufactured using…
Prewired cables, ready for use, with a choice of BBC-designed double-screened or low-loss cable types, 50 ohms. Each individual cable is described in detail by the use of an…
These are suitable for 12G UHDTV, 3G HDTV and other digital video formats. They use Canford SDV flexible low-loss digital video cable with Coax Connectors MicroBNC 12G…
Neue Patchkabel wurden zur Verwendung unserer exklusiven Steckfeldern der Serie microMUSA Video entwickelt, diese eignen sich zur Übertragung von 12G 4K UHD (2160P60)…
These are suitable for 6G UHDTV, 3G HDTV and other digital video formats. They use Canford SDV flexible, low-loss,digital video cable with Coax Connectors DIN 1.0/2.3 6G…
Diese kurze bis mittellange Kabel werden zwischen Kabeln mit voller Größe BNC-Steckverbindern und Routern oder ähnlichen Geräten, einschließlich SFP-Modulen, die entweder mit…
Diese active, optische, HDMI Kabel sind speziell für Anwendungen konzipiert, die längere Kabelwegen benötigen, als welche die mit standard Kupfer HDMI-Kabel erreichbar werden…
These locking, active, optical cables are intended for applications where longer cable-run lengths than those obtainable with standard copper HDMI cables are required. They are…
Locking, active, optical cables are intended for applications where longer cable-run lengths than those obtainable with standard copper HDMI cables are required. They are also…
Prewired cables, ready for use. Each individual cable is described in detail by the use of an abbreviated sequence in the form: Canford Cable - 1st connector - 2nd connector -…
Prewired cables, ready for use, utilising RG213/U cable, 50 ohms. Each individual cable is described in detail by the use of an abbreviated sequence in the form: Canford Cable -…
These are suitable for both digital and analogue video, CCTV and RF applications and use Canford’s SDV-F flexible low loss digital video cable. The Canare FP series crimp F type…
A range of 3-pole heavy-duty mains cables using Walther industrial connectors to BS EN 60309- 1:1999 and BS EN 60309- 2:1999. These are particularly suitable for use with the EMO…
A range of 3-pole heavy-duty mains cables using PCE industrial, Midnight range of connectors to BS EN 60309- 1:1999 and BS EN 60309- 2:1999. These are particularly suitable for…
A range of 3-pole heavy-duty mains cables using PCE industrial, Midnight range of connectors to BS EN 60309- 1:1999 and BS EN 60309- 2:1999. These 32 Amp cables have a PCE…
Neutrik Powercon NAC3FCA 20 Amp connectors terminated to Neutrik Powercon NAC3FCB 20 Amp connectors. Two sizes of cable are available, 16 Amp 3 x 1.5sq.mm or 20 Amp, 3 x 2.5sq.mm…
These cables use Neutrik Powercon NAC3FC-HC 32A connectors supplied unterminated, terminated to Duraplug UK 13A plugs or Walther industrial splash proof plugs (BS EN 60309…
Neutrik Powercon NAC3FCA 20 Amp connectors terminated to WALTHER 215306SW 16 Amp black connectors. All types use 20 Amp, 3 x 2.5sq.mm black cable with either PVC flexible or TRS…
Neutrik Powercon NAC3FCA 20 Amp connectors terminated to PCE Midnight range, 013-6X 16 Amp black cable connectors. All types use 20 Amp, 3 x 2.5sq.mm black cable with either PVC…
Neutrik Powercon TRUE1 NAC3FX-W-TOP 16 Amp connectors terminated to Neutrik Powercon TRUE1 NAC3MX-W-TOP 16 Amp connectors. All types use 20 Amp, 3 x 2.5sq.mm black cable with…
Neutrik Powercon TRUE1 NAC3FX-W-TOP 16 Amp connectors terminated to WALTHER 215306SW 16 Amp black connectors. All types use 20 Amp, 3 x 2.5sq.mm black cable with either PVC…
Neutrik Powercon TRUE1 NAC3FX-W-TOP 16 Amp connectors terminated to PCE Midnight range, 013-6X 16 Amp black cable connectors. All types use 20 Amp, 3 x 2.5sq.mm black cable with…
Flexible PVC Netzkabel in schwarz vorkonfektioniert mit Neutrik Powercon NAC3FCB 20 Amp-Stecker auf IEC 60320 C13 weibliche AC-Netzanschluss. Alle Typen verfügen über 10…
Flexible PVC Netzkabel in schwarz vorkonfektioniert mit Neutrik Powercon NAC3FCA 20 Amp-Stecker auf Schuko (2-polig) AC-Netzanschluss. Alle Typen verfügen über 16 Amp-Stecker und…
Neutrik Powercon NAC3FCA 20 Amp connectors terminated to moulded UK 13A plugs. All types use 13Amp, 3 x 1.5sq.mm cable with PVC flexible jacket. Plugs are fused with a 13A…
Neutrik Powercon TRUE1 NAC3FX-W-TOP 16 Amp connectors terminated to moulded UK 13A plugs. All types use 13Amp, 3 x 1.5sq.mm cable with PVC flexible jacket. Plugs are fused with a…
A range of Powercon converter cables with Powercon inlet/outlet connectors to a combination of IEC and Powercon TRUE1 cable connectors. Powercon Inlet/Outlet connectors are…
Unsere Cat6A geschirmte Patchkabel sind mit Canford Cat7-F extra-flexiblem, einsetzbaren Kabel und Neutrik Ethercon NE8MX6-T Steckverbindern auf beiden Seiten konfektioniert. Der…
Unsere Cat6A geschirmte Patchkabel sind mit Canford Cat7-F-HD robustem, extra-flexiblen, einsetzbaren Kabel und Neutrik Ethercon NE8MX6 Steckverbindern auf beiden Seiten…
These Category 6 compliant unscreened cables are made using Canford's CAT6-F U/UTP extra-flexible deployable cable. They are fitted with Neutrik Ethercon NE8MX-1 connectors at…
Canford CAT5E-R is a ruggedised, PU jacketed, deployable data cable for Cat5E applications. It features stranded cores for flexibility, a foil and braid screen for maximum EMI and…
Unsere Cat5E geschirmte Patchkabel sind mit Canford Cat5E-F extra-flexiblem Kabel konfektioniert. Sie sind mit Neutrik Ethercon NE8MX1 Steckern auf beiden Seiten konfektioniert…
Unsere Cat5E geschirmte Adapter-Patckabel sind mit Canford Cat5E-F extra-flexiblem Cat5E Kabel konfektioniert. Sie sind mit einem RJ45 mit schwarzer Knickschutztülle auf beiden…
Unsere Cat5E geschirmte Patchkabel sind mit Canford Cat5E-F extra-flexiblem Kabel konfektioniert und sind mit Canford Connect TOURCON-RJ45 Steckverbindern auf beiden Seiten…
Unsere Cat6A geschirmte Patchkabel sind mit Canford Cat7-F extra-flexiblem, einsetzbaren Kabel und RJ45 Steckverbindern mit schwarzen Knickschütztüllen auf beiden Seiten…
These Category 6 compliant unscreened cables are made using Canford's CAT6-F U/UTP extra-flexible deployable cable. They are fitted with RJ45 connectors with black boots at each…
These Category 5E compliant screened patchcords are made using Canford's CAT5E-F extra-flexible deployable Cat5E cable. They are fitted with RJ45 connectors with black boots at…
Flexible screened patchcords for use with Canford RS422 patch panels and any other RJ45 application where screening and flexibility are important. Manufactured using Canford’s…
Diese Baureihe mit robusten Stage- und Anschlussboxen sowie extrem flexiblen Multicore-Kabeln wurde für den zuverlässigen Einsatz im anspruchsvollen Tour-Alltag konzipiert…
Canford bietet Datenkabeltrommeln aus Kunststoff, Gummi oder Metall an. Die Variante aus Gummi ist robust und leicht und verfügt über einen Kunststofftrommel- und Rahmen, die…
Canford bietet Audiokabeltrommeln aus Kunststoff und Metall an. Die Variante aus Gummi ist robust und leicht und verfügt über eine Kunststofftrommel mit Rahmen, die robust…
Eine Reihe von Industriestandard SMPTE311M Hybrid-Glasfaser-Kamerakabel, die auf entweder Metalltrommel oder ‘Skeleton’ Kabeltrommel geliefert werden. Die Metalltrommel haben…
Canford bietet Video-und Triaxkabeltrommeln aus Kunststoff und Metall an. Die Variante aus Gummi ist robust und leicht und verfügt über einen Kunststofftrommel- und Rahmen, die…
Copper foil tape, 18mm wide, 0.1mm thick (1.8mm²), insulated with 0.05mm thick Melinex tape bonded to the foil. Approximate resistance 1ohm/100m. Specifically intended for…
A cable specifically manufactured for use in 100 volt line loudspeaker system installations. The cable has two twisted cores of 16/0.2mm (0.5mm sq.) tinned copper wire, with…
Economical 2-core 0.75mm² and 1.5mm² cables designed specifically for exterior use, for both low impedance and 100 volt line loudspeaker systems. The construction is similar to a…
General purpose loudspeaker cables similar in construction to 2-core (GPS 2-core) and 4-core (GPS 4-core) mains cables, but manufactured specifically for use as loudspeaker feeds…
General purpose loudspeaker cables similar in construction to 2-core (GPS-LFH 2-core) and 4-core (GPS-LFH 4-core) mains cables, but manufactured specifically for use as…
General-purpose loudspeaker cable similar in construction to GPS, but with reduced insulation thickness and reduced overall jacket diameter, making this cable not only a little…
Two and four-core 2.5mm² cross section extra-flexible multicore cable for loudspeaker wiring. Core pairs are colour coded using the resistor colour code as there is no standard…
Two, four and eight-core 2.5mm sq. cross section multicore cables for fixed installation loudspeaker wiring when Low Fire Hazard (‘LSOH’) designs are specified. Core pairs are…
Two, four and eight-core 4mm sq. cross-section extra-flexible multicore cable for loudspeaker wiring. Core pairs are colour coded using the resistor colour code as there is no…
Two and four-core, 4mm sq. cross section multicore cables for fixed installation loudspeaker wiring when Low Fire Hazard ('LSOH') designs are specified. Core pairs are…
Increasing use of network and data cables between audio and video devices on location calls for a Category 5E cable that is designed specifically for deployable use. Basic…
A reduced size version of Canford CAT5E-F, designed specifically for installations where a very flexible screened Category 5E cable is required. The core construction and jacket…
This special version of Canford's CAT5E-F flexible Cat5E cable has a polyurethane outer jacket providing greater abrasion resistance (but slightly less flexibility) than the PVC…
This specialist version of Cat5E SF/UTP (foil and braid screen) has a very tough polyurethane outer jacket, and has moderate flexibility. The jacket is two-layer, the inner layer…
Mehrkreis-fähig einsetzbares Cat5E-Kabel, für Studio- und Touring-Anwendungen/Außenübertragungen, basiert auf dem geschirmten flexiblen CAT5E-F Kabel von Canford. Kabel –…
Increasing use of network and data cables between audio and video devices on location calls for a Category 6 cable that is designed specifically for deployable use. Basic Category…
Die zunehmende Verwendung von Netzwerk-und Datenkabeln zwischen Audio-und Videogeräten verlangt ein spezielles Kabel, das für diesen Einsatz entwickelt wurde, CAT 7-Kabel. Dieses…
Increasing use of network and data cables between audio and video devices on location calls for a Category 7 cable that is designed specifically for deployable use. Basic Category…
Foil screened, 120 ohm installation cable, specifically for DMX512 lighting-control applications, designed to meet RS485 data cable specification. Available in 1 pair and 2 pair…
Flexible low-loss coaxial 75 ohm cable for both serial digital and analogue video signals. It is constructed to have maximum flexibility whilst maintaining a very high level of…
Extra-flexible low-loss coaxial 75 ohm cable for both serial digital and analogue video signals. It is constructed to have maximum flexibility whilst maintaining a very high level…
This has the same construction as standard SDV-F, but with a polyurethane jacket that's incredibly tough and resilient, and which remains flexible in sub-zero arctic conditions…
A cable designed specifically for deployable applications where HDTV or SDI signals are to be carried. The construction is optimised for extremely high flexibility, and the…
Coaxial 75 ohm cable designed specifically for 12G, 4K (SMPTE 2082), UHD applications. Constructed for maximum flexibility whilst maintaining a very high level of performance over…
Miniature coaxial 75 ohm cable specifically for serial digital video signals. Note: See suitable connectors for this cable in the drop-down lists below the full cable…
Coaxial 75 ohm cable specifically for serial digital video signals, with compact size. Note: See suitable connectors for this cable in the drop-down lists below the full cable…
Low-loss coaxial 75 ohm cable specifically for 3GHz HDTV and serial digital video signals. Note: See suitable connectors for this cable in the drop-down lists below the full…
Ultra low-loss coaxial 75 ohm cable specifically for HDTV and serial digital video signals. Due to the large diameter and rigidity of group Z cables, strain relief bushes are not…
Flexible and durable coaxial cable, suitable for mobile HD and UHD applications. Designed to be flexible and withstand repeated bending, it has a stranded centre conductor, with a…
Coaxial 75 ohm cable specifically for serial digital video signals, with compact size and low smoke-zero halogen material outer jacket. Note: See suitable connectors for this…
Extended performance, coaxial 75 ohm cable specifically for HDTV and serial digital video signals, with low-smoke, zero-halogen material outer jacket. Note: See suitable…
Ein 75 Ohm kompaktes Koaxialkabel, das speziell für 4K 12G Videosignale mit niedrigem Rauchverhalten sprich halogenfreiem Aussenmantel entworfen wurde. Obwohl dieses Kabel auf…
Extended performance, coaxial, 75 ohm cable, specifically for HDTV and serial digital video signals, with low-smoke, zero-halogen material, outer jacket. Note: See suitable…
Low-loss coaxial 75 ohm cable specifically for 3GHz HDTV and serial digital video signals. Wiring specifications for many public buildings now call for LFH cables to be used in…
Extended performance low-loss coaxial 75 ohm cable specifically for 3GHz HDTV and serial digital video signals, with low-smoke, zero-halogen material outer jacket.. Note: See…
Low-loss coaxial 75 ohm cable designed specifically for 12G, 4K (SMPTE 2082), UHD applications with low-smoke, zero-halogen material outer jacket. Technical…
Ultra low-loss coaxial 75 ohm cable specifically for HDTV and serial digital video signals. Wiring specifications for many public buildings now call for LFH cables to be used in…
A very flexible multicore version of SDV-X-LFH HDTV digital video cable, designed specifically for deployable applications. A tough polyurethane outer jacket provides abrasion and…
Ein Hybrid-Kabel mit Singlemode-Glasfaser- und Kupferleitern, das dem SMPTE311M-Standard für den Anschluss von HDTV-Kameras entspricht. Es kann zur Übertragung von Video-, Audio-…
Industry standard triax cable to a BBC specification, produced with flame-retardant polyurethane jackets, well suited to the onerous conditions normally associated with studio…
Wiring specifications for many public buildings now call for LFH cables to be used in certain areas, notably in corridors, risers etc. Under combustion circumstances LFH cables…
VTF8.5 and VTF11.2 are triax cables, physically similar to the standard type (they use the same series connectors), but have detail differences to improve flexibility. The centre…
Single core “noiseless” extra flexible screened cable with both conductive plastic and helical screens, plus conductive plastic coating on inner core for ultra-low microphony…
Single core low capacitance helical screened cable for general unbalanced wiring applications. Overall diameter of 4.5mm makes it suitable for use with virtually all phono (RCA)…
A flexible, single conductor screened cable suitable for inter-wiring when space really is at a premium. At 0.6mm in diameter this is one of the smallest cables of its type. The…
This D'n'A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be…
FST has long been one of Canford’s best selling products – the perfect installation cable, with jacket + foil single stripping. DFT is the true 110 ohm version of FST, similar in…
An extremely small overall diameter, ultra-thin strand twisted twin conductor cable, with Kevlar reinforcement within each conductor for greatly increased resistance to breakage…
A high performance range of general purpose extra-flexible twisted twin OFC (oxygen-free copper) conductor, helical (“lap”) screened cables, suitable for both microphone and…
Designed for applications requiring either an extra flexible mic cable or one of reduced overall size. This cable uses the standard HST cores and screen construction, and has the…
This is the same construction cable as standard HST, but with a matt black polyurethane jacket – incredibly tough and resilient, and remains flexible in sub-zero arctic…
Designed for specialised applications requiring either an extra flexible mic cable or one of reduced overall size. The cable uses the standard HST core and screen construction…
A high performance extra-flexible twisted twin conductor, helical screened cable, with an impedance of 110/120 ohms specifically designed for transmission of AES/EBU digital audio…
These cables follow the same design and construction principles as the standard HST and HST-R, but have larger cross section conductors (0.5mm²) for applications where a lower DC…
Designed for the transmission of sound through noisy areas the balanced quad cable is used as a twisted pair with capacitance unbalance characteristics designed to cancel out the…
Flexible ‘starquad’ multicore cable based on a BBC specification. Suitable for microphone multicores in noisy environments, especially near thyristor controlled lighting. This is…
A high flexibility multiquad cable for all microphone and line level applications, offering the greatest level of immunity to external noise. Each core comprises a balanced quad…
Starquad multicore cable for installed applications. Cores are foil screened, jacketed and numbered, and laid up with an overall low smoke zero halogen (LSOH) jacket. Note that…
These cables, to a BBC specification but updated to low fire hazard (LSOH) standards, have single solid conductors, twisted in pairs and overall foil screens with drain wire. They…
Wiring specifications for many public buildings now call for LFH cables to be used in certain areas, notably in corridors, risers etc. Under combustion circumstances, LFH cables…
Particular applications of FSMB2 include microphone circuits with DC operating pairs, RS422 data and talkback send/return. Note that this cable has a common drain wire. Impedance…
The softest, “sexiest”, most flexible multipair in the world? Probably! Canford’s ultimate development, using the latest composite plastics technology. A multipair cable for users…
A small diameter multipair cable based on Canford’s HSJ series flexible individually jacketed multipair cable. The design is similar but uses smaller conductors and thinner…
This twisted pair overall screened multicore cable, to BBC specifications, has stranded conductors and braided screen. Technical Specification: BBC…
Stranded 0.5mm sq. conductor, unscreened, flexible, multicore cable, of the industry standard style DEF-STAN 16-2-*A. Other cables in this series are available to special…
Stranded 0.22mm sq. conductor, unscreened, flexible, multicore cable, of the industry-standard style DEF STAN 7-2-*A. Other cables in this series are available to special…
Solid conductor 2-core jumper wires specifically for use with Krone and other IDC systems. CW1423 type These have a hardened grade of PVC for their outer insulation…
Solid conductor 2 core jumper wires specifically for use with Krone, and other IDC systems. Complies with BBC specification PUN2/2M. Technical…
A high performance, miniature, 50 ohm double-screened coaxial cable, to a BBC specification for UHF and VHF applications. Note: See suitable connectors for this cable in the…
Stahlkabeltrommeln mit schwarzer Nylon-Oberfläche. Trommeln, Rahmen und weitere Ersatzteile sind auch einzeln erhältlich. Bis zu drei Trommeln können aufeinander gestapelt werden…
This range of robust and lightweight cable drums all have plastic drums, with frames of either steel tube or moulded high-strength plastic. All have a friction drum-brake…
This range of robust cable-drums all have steel drums, with steel tube frames. All have a friction drum-brake incorporated into the frame to prevent movement in transit. The drums…
This range of robust cable-drums all have steel drums, with steel tube cage style frames that are designed to permit the drums to be stacked. All have a friction drum-brake…
This range of extremely durable cable-drums all have drums made from synthetic rubber, with moulded high-strength plastic frames. All have a friction drum-brake incorporated into…
This range of robust cable-drums all have steel drums, with steel tube frames incorporating two carrying handles. All have a friction drum-brake incorporated into the frame to…
This range of robust cable-drums all have steel drums, with steel tube cage-style frames. All have a friction drum-brake incorporated into the frame to prevent movement in…
A range of metal flange plates punched with up to twelve ‘Universal’ cutouts for use with Canford plastic, rubber and metal cable drums. Made in 3mm aluminium and finished in…
Large cable drums loaded with a lot of cable can be extremely heavy and difficult to manoeuvre. Often they will exceed ‘safe lifting’ weights. This series of heavy-duty trolleys…
Diese extrem robusten „Skeleton“-Kabeltrommeln eignen sich besonders für den mobilen Einsatz, sind aber ebenso in Fernseh- oder Filmstudios zuhause. Sie sind aus robusten…
These slot-punched, plastic, cable trays provide a very economical and completely non-corrodible system for cable installations, the system being designed to reduce labour costs…
Pressed steel brackets suitable for fixing plastic and metal cable tray. Slot is 7mm wide on all types. Available in black painted finishes (to match the cable…
Brush-strip cable access panels, lacing bars, horizontal cable management panels and cable trays for use in 19-inch racks. Rack Cable Access Panels - Brush strip These are…
Where cables have to cross carpets and floors temporarily, this tape provides a wonderful alternative to Gaffer tape. Whilst both are quick to install, this is sheer bliss to…
Standard series Another form of re-usable cable tie, based on the well established ‘hook and loop’ materials. Ties have a centre closed section of hook and loop which can be…
This range of ratchet-action, precision, crimp tools for coaxial connectors are each supplied fitted with the appropriate die-set for Telegartner BNC HD connectors. The tools are…
Specially made for Canford, this tape measure is marked in millimetres and rack units. A useful aid to marking-out rack installation layouts, or for quickly checking how much…
It is often neccessary to fit BNC connectors in drilled, rather than punched, holes, without the anti-rotation flats that a punching tool would provide. Tightening up the locking…
Canford General Purpose Gloves Designed for maximum comfort and dexterity, made with durable synthetic leather on the palms and thumb cuff, heavy-duty double stitching…
100% soft-touch cotton, zip-up riggers hoodie. With integrated hood pull cords, twin front pockets, this machine washable hoodie is also adorned with the Canford logo in large on…
Jackfield burnishers These allow easy cleaning of jackfield main contacts without disassembly or removal. They are machined from tool steel then treated to achieve a fine…
Data sheets are available for all chemical products free on request (C.O.S.H.H.). Iso-propyl Alcohol (Propan-2-ol) An all-purpose cleaning fluid, harmless to tape heads, optical…
Microphone windshields and headphone pads should be cleaned regularly for hygiene reasons. It is essential, of course, that they are completely dry before they are used…
A light weight, black polyester case with zip closure, suitable for carrying a small range of hand tools such as screwdrivers, nutspinners, cable strippers, plyers, cutters…
Black Zip closing soft PVC pouch, soft textile lined. Often known as ‘gig bags’. Similar to those supplied with microphones from Shure, Audio-technica, Sennheiser etc. Also make…
All those who have regularly used microphone stands will have suffered trapped fingers, bruised toes, torn clothing and the consequential damage to mic stand paintwork and…
Simple padded pouches with hook-and-loop fastening flaps. Large size 200mm x 120mm, small 90mm x 90mm. Large is particularly suitable for presenter earpieces and cords or acoustic…
A padded bag suitable for all headphones and headsets (including Peltor and other large earcup designs), giving protection in transit. Constructed from a hard-wearing, padded…
Using the Hofbauer Maxibag 2-81 as the main carcass, this case has custom foam inserts that provides protection for a variety of wireless systems. The foam insert provides space…
These cases are extremely strong in relation to their weight, and offer complete protection against almost any hazard. They are built from either 6mm or 9mm thick plywood, (the…
Designed specifically for audio-visual applications, these are fully-open frames for mounting 19-inch equipment, useful where easy access to cabling and equipment is needed…
These floor-standing lecterns combine a sloping script-space with, below, a sliding shelf for a keyboard, a fixed shelf (15U version only) and a rack cabinet for AV equipment such…
For use in home, educational, corporate and commercial environments, where visual appearance is important. These floor-standing 19-inch racks are constructed from high-density…
Available upon request, Canford Custom Wood Cabinets. Using years of wood-making experience, Canford can create custom joinery cabinets to your requirements. Contact Sales to…
This series of 19-inch, reduced-depth rack cabinets have been specifically designed to provide a cost-effective solution for a wide variety of applications where space is limited…
Designed for use in open areas subject to the full force of the elements or harsh environments such as chemical and pharmaceutical plants or marine applications, offering sealing…
For use in home, educational, corporate and commercial environments, where visual appearance is important. These wall-mounting 19-inch cabinets are constructed from high-density…
For use in home, educational, corporate and commercial environments, where visual appearance is important. These wall-mounting 19-inch racks are constructed from high-density…
Diese Reihe von 19 Zoll Rackgehäusen sind sowohl für Wandmontage als für Montagen unter Arbeitsflächen geeignet, wo auch immer Anschlussfelder oder Rackeinbaugeräte benötigt…
These floor-standing trolleys combine a 15 degree sloping top rack space intended to house shallow equipment such as rack mounting mixers, with rack spaces to both the front and…
For use in home, educational, corporate and commercial environments, where visual appearance is important. These desktop 19-inch cabinets are constructed from high-density…
For use in home, educational, corporate and commercial environments, where visual appearance is important. These desktop 19-inch racks are constructed from high-density particle…
With an overall depth of 150mm and providing 140mm of usable space or 300mm overall depth providing 290mm of usable space, this range of compact wooden manufactured, half rack…
For use in home, studio, recreational and educational environments, where visual appearance is important and floor space is a premium. These 19-inch wooden vertical mount pods are…
Undershelf racks, made from ash or oak-veneered, high density particle board with matching trim, with fully punched rack strip in front face and open back. Four mounting brackets…
For use in live, exhibition, hospitality and educational stage environments, where visual appearance is important. These 19-inch truss pods are designed to house and suspend 19…
19 Zoll rackmontierbare Geräte können mit diesen einfachen, kostengünstigen Halterungen entweder horizontal oder vertikal montiert werden. Passend für Wand- und Deckenmontage…
A range of 19 inch rack-mounting empty cases, available in three sizes and two depths. All have a wrap-around style case with removable top cover, extruded front and rear panels…
A range of 19 inch rack-mounting empty cases, available in a variety of formats and sizes. All have a wrap-around style case with removable top cover, extruded front and rear…
Spring loaded plastic clip for a secure pocket or belt retention. Two screw/bolt fixing holes. Dimensions: 55.5 × 25 × 2.4mm.
Attractive robust boxes based on box section extrusions manufactured to Canford design. Intended for clients to create custom connector combinations in an attractive finished…
An attractive robust box based on a box section extrusion manufactured to Canford design. Internal slots allow location of PCB’s (85mm width), and additional channels are…
Offered in a rainbow of colours, these replacement mouldings can be used to customise any item of equipment built in the standard Canford Type 85 extruded box. Use them for…
These are designed to hold securely any products built in the standard Canford 89mm and 106mm width extruded aluminium boxes. They also fit the older 106mm wide Canford Eurocard…
Used to blank off unused sections of 19 inch racks to give a tidy appearance and maintain rack-cooling airflow, these panels are also suitable for mounting connectors, switches…
Half rack-width blanking panels may be used to add support to half rack-width equipment fitted with mounting flanges, ensuring secure mounting of the equipment, a tidy appearance…
Perforated type, steel Rigid steel rack panels perforated with an array of 4mm holes, a design that gives the greatest open area for airflow. Available in 1U, 2U, 3U and 4U…
A heavily-engineered, reinforced, steel, 1U panel with substantial full-width bar, which may be used either to tie-off cables or for added protection to protruding equipment or…
Eine Reihe von Rackblenden mit geschlitzten Ausschnitten, die den einfachen Zugriff an Systemkabel und Patchkabel von der Vorderseite des Rackschrankes erlauben. Der Auschnitt von…
A range of half rack width blanking panels with a slotted cut-out allowing system cables and patch cords to be easily accessed at the front of the rack. Panels may be attached to…
Cut to suit a range of rack heights, these steel, 'U'-shaped, cable trays, available in two widths and two finishes, fix to the front-to back cross members in a rack. The trays…
Used for the orderly management of cables wired to such items as jackfields and connector panels, these simple items of hardware are offered to the installer or custom builder as…
Used to provide support for heavier equipment, these accessories fasten to the inner face of the vertical mounting profiles of a rack. They also provide assistance when inserting…
Used to provide support for heavier equipment, these accessories fasten to the inside face of the front and rear rack-mounting profiles of the rack. They also provide assistance…
These universal mounting 1U units are available with 2 or 4 fans, and with or without an analogue thermostat, to ensure efficient cooling of all electronic equipment. Front panels…
Aluminium-body heaters with PTC heating element, available with 75W, 100W or 125W power output. The supplied thermostat may be set between 0–60 degrees C. Both the heater and…
These kits contain sets of screws, washers and cage-nuts for fixing accessories to 19-inch racks. Each kit contains 50 sets. Screws are M6 threaded and have slotted, cheese heads…
A range of replacement locks and spare keys for both the Canford and Lande rack cabinets.
Double angle, plated finish Double angle 1.5mm thickness (16 gauge) steel angle. Standard punching (3 holes per 'U') in narrow flange for rack mounting, mounting slots punched in…
Panels and rackmounting equipment can be recessed within a rack by means of these recess mounting-brackets. They are ideal for vehicles or fixed systems where space in front of…
Suitable for most 19-inch racks and cabinets, these drawer units provide a secure storage compartment. They are available in two colours and three heights. A welded steel drawer…
Useful for storing important diagrams or instructions within a cabinet, these document holders are available in two sizes, to suit either A4 or A5 size documents. The A4 model is…
Ideal for OB trucks, studio hospitality etc. 240V AC powered, 65 watts, energy consumption 0.76kWh/24h. 13U height. Depth required 383mm. Colour black.
These internal shelf units suit most standard 19 inch racks and are available in six sizes and three depths, in three different colours. They are supplied with lacing bars…
A range of internal shelf units to suit most standard 19 inch racks, available in three types and two colours. Modem Shelves These are ventilated, steel trays which mount on the…
Designed to improve the appearance of racks and allow Canford extruded box units, ProAVM *-ITs or other similar equipment to be rackmounted, this 2U enclosure has a removable…
A range of custom manufactured heavy duty shelves designed to fit in the base of our ES362 series floor standing rack cabinets, Ideal for mounting heavy equipment such as…
A range of rackmount power distribution units available with a variety of connector types. All units are switched, have extruded aluminium housing and are finished in…
Used to provide a central point for equipment earth connections. Available in three styles with 6, 10 or 44 earth points. Each supplied with 4x 4mm diameter 40cm earth link cables.
Type A Black anodised finish, 13mm high (external) turned up ends to retain inserts, countersunk holes (6BA) for mounting, supplied complete with paper legend insert strip, clear…
This design of designation strip, also known as “mushroom”, comprises a convex transparent plastic part with pre-drilled countersunk mounting holes, plus a profiled transparent…
Canford entwickelte Leuchtschilder speziell für den Studiobetrieb, diese können aber auch in Konferenzräumen sehr gut eingesetzt werden. Die „Rotlicht“ Leuchtschilder sind so…
Die ursprünglichen Canford Studio Leuchtschilder wurden jetzt eingestellt. Sie wurden von einem neuen LED Design ersetzt. Siehe „CANFORD STUDIO LED LEUCHTSCHILDER“. Bitte zu…
A range of single and multicolour, high intensity, LED signal lights, with a special lens to provide 180 degree illumination visibility even in high, ambient light conditions…
Tisch Lichtzeichen Gefertigt aus poliertem Hartholz und erhältlich in Esche, schwarze Eche, Eiche und Sapelli, passen diese Tischlichtzeichen zu jedem Raum. Die Lampenhalterung…
This free-standing unit allows the remote switching of mains powered equipment such as illuminated signs, cue lights etc., while maintaining electrical isolation from the mains…
These units, constructed from elegant aluminium extrusions, have fully adjustable shutters to provide a narrow 'curtain' of light directed at the work surface. They have integral…
Aus elegantem Aluminium Extrusionsverfahren, verfügen diese Skriptleuchten über voll einstellbare Rollladen, die für einen nach unten gerichteten ‚Lichtvorhang‘ zur Arbeitsfläche…
Die RGB LED Rack-Beleuchtung montiert in einem Rack und stellt Licht mit hoher Brillanz zur Verfügung, um genügend Helligkeit zur Verfügung zu stellen, damit die Geräte auch im…
The LED Racklight mounts in an equipment rack and provides a high-brightness light source to illuminate the controls of equipment mounted in the rack below it. Designed to keep…
Independent clocks, taking their reference from the clock at the National Physical Laboratory, Teddington, which is transmitted by VT Communications from Anthorn Radio Station at…
Quartz controlled wall clocks with stepping second hand. They have a white case of 250mm diameter, white dials with black numerals. Supplied complete with AA size battery.
Nicknamed the ‘overgrown door knob’ this is an alternative answer to the problem of correct patchcord storage. It is turned from solid wood and is available in five finishes, Ash…
Both audio and video patchcords should either be stored straight, or with large bend radius. The Canford patchcord rack accepts both standard 316 audio and MUSA video patchcords…
Designed as a “headphone holder”, this is a versatile rack-mounting hook which is fitted over a 2U panel in a rack, and may be used to hold accessories in a convenient place for…
For use in studio, home, educational, corporate and commercial environments, where visual appearance is important. These desktop risers are designed to raise equipment, such as…
A range of purpose built tables for use in radio and production studios. The standard shapes are circular (1220mm diameter), hexagonal (1220mm across flats), rectangular (1530 x…
Diese selbstklebende, gefärbte Etiketten werden so konzipiert, um eine kostengünstige Methode um Anschlüsse zu identifizieren, auf jeglichem Anschlussfeld, das die Neutrik…
These specially produced labels allow patching routings to be identified. They are manufactured from a material which resembles paper, and can be written on with ballpoint or felt…
A lavalier mic with USB interface, for direct connection to laptops, tablets and PC’s, with omnidirectional polar pattern for optimum speech pickup. Specification: 8mm diameter…
These miniature lavalier-style microphones have been manufactured to Canford’s specifications to provide a cost-effective and stylish solution for broadcast and theatre…
This collar, or neck worn microphone, is a practical alternative to using traditional placements such as head, ear or lapel. The structure and presentation of the microphone…
This specialised electret-based microphone is designed for fixed installations where unobtrusive pick-up of sound, from a wide range of angles, is required. Originally developed…
Black slimline goosenecks (8mm diameter) with small high performance microphone head (13.2mm diameter). Available in a range of lengths, the model code indicates the length from…
Die Mikrofone dieser Serie bieten eine hochwertige dynamische Kapsel mit 200 Ohm in einem attraktiven, matt vernickelten oder schwarz lackierten Metallgehäuse mit integriertem…
Microphone heads mounted directly onto XLR 3 pin male connectors, for use as talkback microphones plugged directly into mixers, stage boxes etc, or for PA applications in…
These adapters allow conventional dynamic microphones to be connected to beltpack radiomicrophone transmitters. Supplied with 1.5m cable and female XLR microphone input connector…
An alternative method of concealing radio mic transmitters and small talkback receivers easily, comfortably and securely on artistes. The broad elastic belt with hook and loop…
A range of pouches for the most widely used radio mic transmitters, for use when it is not possible to conceal the unit in a pocket. They are made in a machine washable black or…
After many hours of enjoyable research this practical example of unisex under-fashion has been developed to mount body-pack transmitters and receivers on the thigh, underneath…
Flexible paper-covered wire, suitable for stiffening miniature microphone cables for accurate placing near the ear or cheek, or for making custom earloops. The wire will retain…
This handy adapters allows anything with a 3/8” thread (e.g. most European microphone clips and accessories) to be fitted on an ISO-standard camera accessory shoe. The adapter…
Microphone Hook Clamp This standard piece of stage lighting equipment may be used to fix microphone clips to lighting and scaffolding bars from 38-50mm diameter. Supplied…
A range of metal thread adapters, to interface between almost every thread type used on microphone stands and clamps, whether commonly in use or from more “legacy”…
Consisting of two parts, used singly or together, this ingenious device solves many mounting problems associated with microphone stands. It may be used as a discreet guitar clamp…
These clips suit most lavalier microphones, as they grip the cable (0.8mm -2.5mm diameter range) rather than the microphone body. They are discreetly small, with a front part 25mm…
These magnetic clips suit most lavalier microphones, as they grip the cable rather than the microphone body. They have a circular front part, approximately 3mm thick, with cable…
Heavy Duty Modern adjustable mic arm with internal spring mechanism which eliminates the possibility of noise when adjusting in live conditions. Mic arm is locked using the…
High quality, black finish goosenecks, excellent “droop” resistance, available in a range of configurations. Gooseneck is 11mm diameter on standard series, 13mm on a heavy duty…
A range of foam windshields in a variety of standard colours, manufactured specifically for Canford Audio by Europe’s largest specialist windshield manufacturer. The sizes cover…
Fine mesh windshield to protect microphones from ‘popping’ and breath noise for close vocal work. Two fine mesh screens of fire-retardant fabric are supported by a circular…
An idea invented to promote TV and radio stations when microphones are seen in shot in news footage. The flag consists of a low-reflection black or white inverted square or…
Lapel microphones used with radio-mic transmitter body-packs usually require a low-voltage bias that is normally provided by the pack. These useful adapters take the place of the…
Battery and mains powered two-channel 48V microphone phantom power supplies, housed in a standard extruded box. Both models have panel-mounted XLR type input and output…
A battery driven power supply capable of powering all common professional microphone powering standards. 12 volt AB(T) power, 12, 24 and 48 volt phantom (fully meeting…
In-line unit to adapt equipment with 48 volt phantom powering (eg. ENG mixers) to supply T-powered microphones. Phantom power end is XLR 3 pin male, T-power end is XLR 3 pin…
DMH95 Lightweight stereo headphones with foam-padded earpieces, which fit firmly but comfortably on the ears and also fold flat for storage - ideal for packing into briefcases…
A range of headphones manufactured in Germany for Canford Audio. For headsets by Canford, see "CANFORD HEADSETS". DMH205 Heavy duty “closed ear” general purpose or studio…
The DMH265 headphones are a special variant of the long-established DMH205 headphones, designed specifically for 'listening post' applications in museums, learning centres and…
A range of headsets manufactured in Germany for Canford Audio. For headphones by Canford, see "CANFORD HEADPHONES". DMH220 Heavy duty dual muff headset combination, robust…
These covers, made of a non-woven lightweight material which is 95% Polypropylene, 5% elastic and is latex free, stretch over headphone and headset earpads. They are available in…
Breaking out headset cables to separate mic and ear loudspeaker connectors has always been one of the more difficult problems besetting audio engineers. This “Y-split” cable has…
Spare parts for the Canford/Tecpro DMH205, DMH220, DMH225, DMH285 and SMH210 headphones and headsets. Ref. on Description Code Drawing …
Spare parts for the Canford/Tecpro DMH320, DMH325 and SMH310 headphones and headsets. Ref. on Drawing Description Code 1 Earpad…
With the advent of far more desktop media editing, often in large open-plan offices, more and more users are forced to use headphones for monitoring their work. This design…
The Canford Audio battery powered headphone amplifier allows connection of stereo headphones to nominally line level sources. Two high impedance, electronically balanced inputs…
This two-channel, battery-powered headphone amplifier is designed for use in the field to monitor cue and a local source. Typically used by broadcasters, it may also suit the…
Available in 220 or 1000 ohm impedance, and in beige or black, these drivers have been optimised for speech quality applications and are used typically for switched talkback (IFB)…
A range of 1000 ohm impedance, non-polarised, black eartube acoustic drivers, complete with cables. Supplied fitted with a Canford in-line limiter, limited to 103dBA and…
A range of straight and curly acoustic eartubes, in several type and colour variants typically used by broadcast presenters but also applicable for communications systems. Made…
Adapters for use with Canford’s or other manufacturer’s 2mm acoustic eartubes. Manufactured from a semi-flexible, translucent PVC, these eartube adapters will facilitate the use…
These are generic, low-profile, light-weight, in-ear headsets, specifically designed for applications where the user may be exposed to higher noise-levels and where a lower visual…
An IFB earpiece with a high efficiency driver, which gives excellent speech intelligibility, a low profile, almost undetectable in vision, designed to fit and sit comfortably in…
These miniature ear-canal earphones, specially made to Canford’s specifications, receive audio signals from inductive sources such as body or neck worn inductive transmitters or…
Canford has considerable experience in the design of headphone limiters and their use in the operational environment. Whilst virtually any headphone or headset can have a limiter…
A range of spares including, spare ear loudspeakers, standard cables and limited cables, for Canford level limited headphones and headsets. Ear…
Under Health and Safety regulations, employers are required to reduce the risk of damage to the hearing of employees from exposure to noise to the lowest level reasonably…
Constructed in the standard Canford extruded box, with ABS bezels, these units enable microphone feeds to be split to feed two destinations. One output, normally used as the main…
These enable microphone feeds to be split to feed three destinations. Output 1, normally used as the main mixer feed, will pass phantom power to the microphone. XLR 3-pin…
A range of interconnection boxes, with simple wired connections, offered at an attractive price in a variety of combinations. All are housed in our robust standard extruded box…
Mit Hilfe eines Audiosplitters lässt sich eine symmetrische, seriell angeschlossene digitale AES/EBU-Audioquelle über drei Ausgänge ausgeben. Das Gerät ist in einem extrudierten…
This unit enables connection to a 100V-line speaker feed in order to derive a level suitable for, say, recording or monitoring with conventional line level input equipment, or to…
Providing isolation between input and output, these are available in single or twin-channel versions. Each channel has a transformer and an 'earth-lift' switch. They are housed in…
Providing isolation between input and output, these are available in four or eight-channel versions. Each channel has a high impedance transformer and an 'earth-lift' switch. They…
These two designs use high-quality, miniature, high-frequency transformers, specially manufactured for Canford Audio, for providing isolation on balanced 110 ohm and unbalanced 75…
Providing isolation between input and output, these are available as eight-channel units, for either 110 ohm balanced or 75 ohm unbalanced circuits. Each channel has a 1:1…
Bei diesen Geräten handelt es sich im Prinzip um 1:1 Übertrager, bei dem ein Anschluss unsymmetrisch und einer symmetrisch ausgeführt ist. In der Regel können sie sowohl in der…
A range of in-line, fixed value, balanced attenuators, with XLR female and XLR male 3 pin connectors. The attenuation value and impedance are engraved on the barrel. They pass…
Two units, utilising a high quality miniature high frequency transformer, specially manufactured for Canford Audio, for matching balanced 110 ohm digital audio circuits to…
Sechzehnkanalige digitale AES/EBU-Audiowandler, 110 Ohm symmetrisch auf 75 Ohm unsymmetrisch, in einem 1 HE Rackgehäuse mit innovativen Montageoptionen. Hier kommen dieselben…
Dieser AES/EBU-Impedanzwandler mit BNC-Buchse und Kabelanschlusspunkten ist auf einem isolierten Blech montiert, das für die Montage in einem Ausschnitt für Komponenten der…
Analogue and AES audio The HG8/1 is an eight-input passive, balanced, stereo source-selector, housed in a 1U rackmount enclosure. A non-shorting “break-before-make”…
A 1U rack-mounting unit, suitable for permanent installations, that feeds MIDI data simultaneously to twelve other devices, avoiding signal delays and distortion that may result…
Canford Dante Adapter bieten robuste Alternative zu bestehenden Audinate und Amphenol Inline-Adaptern, ohne lose Kabel. Einfache Stereo-Audioadapter wandeln zwischen entweder…
This is a clear plastic extrusion, used to link adjacent fader knobs to enable the faders to be operated “ganged” as a pair. Often used for linking two mono channels to operate as…
Robust, cable-mounting push button switch unit, incorporating Neutrik cable housing and strain relief clamp. Switch is momentary action, with single-pole make contacts. Maximum…
Dieser erschwingliche und robuste Aktivlautsprecher ist eine Weiterentwicklung unseres Standardmodells in einem Druckgussgehäuse. Die Anwendungen umfassen Talkback- und…
Ein extrem kompakter Rackmount-Monitor, der nur 1HE Rackfläche belegt. Das Gerät verfügt über zwei kleine elliptische Lautsprecher, die von zwei unabhängigen Verstärkern mit…
Music quality audio transformers for use on 100 volt line systems. High quality audio transformers to give all the advantages of 100V transmission without the disadvantages…
Free-standing units incorporating Sifam "Fast Response" FR39WF "Peak Programme" type meters with the classic 1-7 scale markings. This range of boxed PPMs utilises mild steel…
These mono PPM drive cards incorporate a micro-controller to control the PPM characteristics. They can be run from single or dual power supplies and be driven from balanced or…
Correct alignment and monitoring of programme material is of paramount importance to broadcast engineers and organisations. With the increasing use of independent production…
Plug-in 700Hz (approx.) tone generator, 48 volt phantom powered. Red LED’s indicate presence of 48 volt phantom on A and B legs. Fitted with XLR 3 pin male connector. Useful to…
Red LED’s indicate presence of 48 volt phantom power on A and B legs. Fitted with XLR 3 pin male connector. LED’s also indicate presence of 12 volt phantom power by illuminating…
The Canford phase check system allows fast testing of the polarity of acoustic transducers, microphones and electronic devices. Sophisticated signal processing allows fast and…
These Cable Testers can be used for testing long or short cables, either fixed or installed. The separate REMOTE barrel allows easy testing of cables where both ends of the cable…
Designed for testing either long cable runs or short lengths of cable, balanced or unbalanced, the Canford Audio Mk. 4 cable tester provides a comprehensive visual indication of…
Spare parts for the Canford/Tecpro DMH220, DMH225 and SMH210 headsets. Ref. on Description Code drawing 1 Ear loudspeaker, 400 ohms…
Canford Audio Limited ist im Gesellschaftsregister von England und Wales eingetragenHandelsregister Nr. 1385727Umsatzsteuer Identnummer: GB 660 1163 71
