MUXLAB 500559 AUDIO CONVERTER Wallplate, Bluetooth/analogue to Dante, 2-gang US, Decora, white

500028-WP - Stereo Audio Balun

MuxLab Stereo Hi-Fi Wall-Plate Balun allows an unbalanced line-level Hi-Fi stereo analogue audio to be transmitted via single Cat5e/6 cable in a point-to-point connection to distances of up to 3,250ft / 1km. The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required. Sold individually but used in pairs, the Stereo Hi-Fi Balun can be also used with the 500028 (male RCA connectors) or the 500028-F (female RCA connectors).

Versions

Required accessories: Single back box (country compatible).

Frequency response: 20Hz-20kHz, 3dB. Maximum input: 1.1Vp-p, unbalanced. Insertion loss: Less than 2dB, per pair. THD: 0.007%, 1kHz. Audio impedance: 100ohms maximum, source; 10kohms, minimum, receiver. Weight: 115g.

500033-WP - Quad Audio Balun

500033-WP is a quad audio balun that allows up to four analogue line audio signals to be transmitted via unshielded twisted pair (UTP) cable in a point-to-point connection up to 1km. Sold individually but normally used in pairs, the balun allows up to four coax audio cables to be replaced by a single Cat5e/6 cable. 500033-WP also works in conjunction with other MuxLab analogue audio baluns such as 500019. Audio inputs are by way of female RCA (phono) connections.

Versions

Required accessories: Single back box (country compatible).

Frequency response: 20Hz-20kHz, 3dB. Maximum input: 1.1Vp-p, unbalanced. Insertion loss: Less than 2dB, per pair. THD: 0.007%, 1kHz. Audio impedance: 100ohms maximum, source; 10kohms, minimum, receiver. Weight: 115g.

500038-WP - S-Video/Hi-Fi Balun

Designed for application including classroom video distribution, commercial and home audio/video systems, hospital video training, video conferencing, and video kiosks, 500038-WP is an S-Video/Hi-Fi wall balun that allows a single S-Video signal to be transmitted via unshielded twisted pair (UTP) cable up to 305m in a point-to-point connection. It features an audio bandwidth response of 20Hz to 20kHz for high fidelity applications, and works in pairs or in conjunction with the 500038 or 500017.

Versions

500049-WP - Stereo AV/Infrared Pass-thru Balun

Designed for application including classroom video distribution, commercial and home audio/video systems, hospital video training, video conferencing, and video kiosks, 500049-WP is a stereo AV/infrared pass-through balun that allows a one stereo audio and one infrared emitter signal to be transmitted via a single Cat5e/6 cable in a point-to-point connection. It features an audio bandwidth response of 20Hz to 20kHz, and works in pairs or in conjunction with the 500048 or 500049.

Versions

500053-WP - Component Video/Mono Audio Balun

Designed for commercial and residential HDTV applications, 500053-WP is a component video and analogue audio balun that allows one component video (YPbPr or RGB) signal and one analogue audio signal to be transmitted via one Category 5e/6 twisted pair cable for more cost-efficient cabling. 500053-WP supports 480i/p up to 305m, and 720p/1080i/p up to 152m. Normally employed in pairs or in conjunction with 500052/500053.

Versions

500058-WP - Component Video/Stereo Audio Balun

Designed for commercial or residential AV applications, 500058-WP is a component video and stereo audio balun housed in a wall plate. 500058-WP allows one component video (YPbPr or RGB) signal and one stereo audio channel to be transmitted via a single Cat5e/6 twisted pair cable for more cost-efficient cabling. Supports 720p/1080i/p up to 152m via Cat5E/6. Can be employed in pairs or in conjunction with the 500058.

Note: 500058-WP is not compatible with 500050, 500051, 500052, 500053, 500054, 500055, 500056, 500057, 500250, 500251, 500252, or 500253.

Versions

500041-WP - VGA Balun, Display Side

500041-WP is a balun that eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via a single Cat5e/6 cable. The VGA wall balun allows VGA video to be transmitted up to 107m at 800 x 600 resolution. 500041-WP works with the 500043-WP or in conjunction with 500040 or 500043.

Note: 500041-WP is not compatible with 500010, 500011 nor 500014, and does not support DDC handshaking.

Versions

500043-WP - VGA Balun, PC side

500043-WP is designed for positioning at the PC side of the chain and works with 500041-WP or in conjunction with the 500041 or 500042. 500043-WP is not compatible with 500010, 500011 nor 500014, and does not support DDC handshaking.

Versions

500451-WP - HDMI, HDBT, UHD-4K extender

Designed for commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information system applications, 500451-WP is a HDMI wall plate extender for UHD-4K video signals. The wall plate allows HDMI equipment to be connected up to 70m at 1080P via a single Cat5e/6, unshielded twisted pair cable in a point-to-point configuration. Supports 1080p deep colour, 4K at 30fps, and 3D resolutions. Also supports bidirectional infrared. Transmitter and receiver are available separately or together in a kit.

Versions

Included accessories: Decora faceplate of matching size and colour with fixing screws, power supply, infrared sensor (receiver) or infrared emitter (transmitter).

Maximum distance: 40m, 4K 3840x2160, 25/30Hz; 70m, 1080P deep colour. Power consumption: 6W. Dimensions (HxWxD): 110 x 43 x 38mm. Weight: 700g

500800-TX-WP - KVM HDMI, 4K/60

Designed for commercial and residential AV systems, classroom projector systems, multi-server systems, IT departments, educational institutions, data centres, and media servers, 500800-TX-WP is a wall plate that allows both HDMI and USB equipment to be connected up to 100m over an Ethernet LAN. The wall plate supports HDMI up to 4K/60Hz (4:4:4) via Cat5e/6 cable and is compatible with 500800-RX to support point-to-point, point-to-multipoint and multipoint-to-multipoint configurations. 500800-TX-WP also allows the creation a video wall of user configurable size (X by Y), supporting100’s of screens (network bandwidth dependant), utilizing a single receiver for each display in the array.

The Transmitter terminates to a computer server/workstation via an HDMI and USB port. A single 500800-RX receiver can be switched via hotkey sequences to any Transmitter on the network, allowing a single operator to manage numerous servers/workstations, in a distributed KVM application.

Versions

Included accessories: Decora faceplate of matching size and colour with fixing screws, mud ring.

Bandwidth: 597MHz. Maximum distance: 100m. Compression: JPEG 2000. Latency: 1 frame/16ms, typical;' 2 frames/33ms, maximum. Power consumption: 6W. Dimensions (HxWxD): 110 x 105 x 55mm. Weight: 1.38kg

500777 - HDMI/VGA/USB

500777-TX is a HDMI/VGA/USB over IP PoE wall plate transmitter that allows HDMI, VGA and USB equipment to be connected up to 100m, with video supported at up to 4K (3840×2160) resolution at 30Hz via a single Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. The USB port may be used for extending various USB devices. Point-to-multipoint and multipoint-to-multipoint configurations are also possible by connecting several 500777-TX and 500777-RX to the same local Ethernet IP network via an Ethernet Switch. 500777 also supports PoE if used with a PoE (PSE) Ethernet switch.

500777-RX is a HDMI/USB over IP PoE wall plate receiver - designed for compatibility with 500777-TX. The unit has 1x HDMI out, 1x audio ouput via 3.5mm jack socket, 2x USB 2.0 type-A ports, 2x USB 1.1 type-A ports, and a single Ethernet Port.

MuxLab ProDigital Network Controller (500811) is available to simplify the configuration and utilization of the 500777-TX and other MuxLab IP based products via an Ethernet web interface. MuxLab Control Android and iOS application may also be used for connectivity management, in combination with the 500811 Network Controller.

Versions

Included accessories: Decora faceplate of matching size and colour with fixing screws, mud ring.

Dimensions (HxWxD): 115 x 115 x 52mm. Weight: 610g.

500773 - HDMI/VGA

Designed for commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, and medical information systems, 500773 is a HDMI/VGA over IP PoE wall plate transmitter which provides a convenient interface for HDMI and VGA input sources. It allows HDMI and VGA equipment to be extended up to 100m from an Ethernet switch via single Cat5e/6 cable. The unit supports one HDMI input, one VGA input, and one 2-channel audio-In. 500773 supports resolutions up to 4K (3840×2160) at 30Hz for HDMI, and 1920×1200 at 60Hz for VGA. The input selection between HDMI and VGA inputs may be locally or remotely selected, and supports auto and manual switching modes with LED indicators. This device may be used with 500758-RX and 500759-RX over IP receivers, all managed via the 500811 Network Controller. The device supports PoE (PD) for easy installation.

Versions

Included accessories: Decora faceplate of matching size and colour with fixing screws, mud ring.

500817 - Touch Control Panel

Designed for use in commercial, classroom, and residential AV systems, and boardroom systems, 500817 is a 5-inch touch control panel that allows control over compatible MuxLab devices and third-party products. The device combines the capabilities of an in-wall touch panel and an advanced control processor. The 5-inch high-resolution colour touch screen supports two-way feedback and the addition of various programmable buttons that can be placed on different pages as required. 500817 supports 1x Ethernet port (for TCP/IP, HTTP, UDP, and Telnet), 2x RS-232 ports, 1x RS-485port, 1x infrared port, 2x voltage sense ports, and 2x relay ports for control of end devices.

Compatible MuxLab products include AV over IP system via the 500812 Pro Digital Network Controller, MuxLab’s TCP/IP, Telnet and RS-232 managed Matrix Switches, as well as third party devices such as projectors, projector screens, displays, AV sources, and other similar devices. 500817 Touch Control Panel can be programmed, configured, and managed via the web interface.

Versions

Included accessories: Plastic Frame, spatula, IR emitter, and PSU with US/UK/EU blades.
Required accessories: 1-gang US decora style back box.

Output ports: 1x Ethernet for TCP/IP via RJ45, 2x RS232 via 3-pin terminal blocks, 1x RS485 via 3-pin terminal block, 1x infrared emitter via 2-pin terminal block, 2x low voltage relay ports via 2-pin terminal blocks. Input ports: 2x low level detection via 2-pin terminal blocks. Other connections: 1x 2-pin terminal block power input, 1x USB type-B connection for firmware updates. Dimensions (WxDxH): 145 x 37 x 100mm. Weight: 0.34kg

500816-IP-V2 - 8-Button Control Panel

This control panel has been designed for installation in a wall or flat surface such as a table-top. Having eight backlit, individually programmable buttons, 500816-IP allows the user to remotely control MuxLab AV over IP devices when used in conjunction with 500811, along with MuxLab matrix switches. Supporting PoE, the controller supports a single Ethernet port for TCP/IP and Telnet, 2x RS232 ports, 1x infrared port, and 2x relay ports.

Versions

Included accessories: IR emitter, 2x sucking cups, and PSU with US/UK/EU blades.
Required accessories: 1-gang US decora style back box.

Dimensions (WxDxH): 114 x 70 x 36mm. Weight: 0.34kg