A range of UK-manufactured power distribution units for mounting in the rear of equipment racks, on workstations and consoles, or similar applications. All units have extruded aluminium housings, and are finished in BS4800-00A05 Light Grey (within a gnat’s whisker of BS4800-10A03 Dawn Grey and RAL7036 Platinum Grey). They are available in three output connector angle formats and with 16 amp or 32 amp inlet cables and plugs.
All types have 3-hole mounting flanges at each end, and attached 3 metre input cable with BS EN 60309 16 Amp or 32 Amp plugs (internal wiring uprated accordingly). Case width for all types is 65mm, depth 46mm.
XH Series - Horizontal Mounting
These have modular BS1363 3-pin 13A socket units mounted at 50mm pitch, to give the highest possible density. The input cable is at the left-hand end of the unit.
XA Series - Vertical and Horizontal Mounting
These have modular BS1363 3-pin 13A socket units inclined at an angle of 45 degrees from the centre line of the case, allowing easy connection of leads with moulded plugs and also larger plug-in DC power supplies. They are available in two versions. XAL has the cables angled to the left (when mounted vertically), XAR to the right. The input cable is at the bottom of the unit when mounted vertically.
They can of course be mounted horizontally. In this case, use type XAL if cable entry at the right-hand end is required, XAR if required at the left.
To special order, these units are available with neon indicators, neon switches (with side guards), filters, residual current breakers, input fuses or with many other national and international types of outlet connector - contact Technical Support for more details.