Camera-Mount is the latest addition to Audio-Technica's System 10 range of compander free wireless microphone systems which operate in the licence exempt 2.4GHz frequency range. Camera-Mount is a portable system for use with DSLR and semi-professional video cameras. It is intended for video production and electronic news gathering (ENG) applications. A simple, uncomplicated plug-and-play set-up makes System 10 Camera-Mount suitable for a wide variety of user groups.
System 10 Camera-Mount is available in handheld or body-pack transmitter configurations. A maximum of four systems (channels) can be used in a single location without any frequency coordination or group selection issues. Although individual components can be purchased separately, it is not possible to use multiple transmitters simultaneously with a single receiver. An automatic frequency selection function ensures intuitive set-up, interference-free and reliable performance. Both receiver and transmitter units incorporate an 'easy-to-read' numerical System ID display and Pair button.
ATW-R1700 2.4GHz Receiver - Camera Mount
All systems are supplied complete with the ATW-R1700 lightweight diversity receiver which provides independent headphone monitor output and, selectable balanced or unbalanced dual mono audio output via 3.5mm mini-jack sockets. An Attenuator Switch can be used to reduce the audio output by 0, 10 or 20 dB. An LCD provides system information such as RF signal level, System ID and battery status of both the transmitter and receiver units. Coloured LED’s indicate paired status and AF Peak when audio distortion is present at maximum modulation. The receiver is powered by an internal rechargeable Li-Ion battery which can provide up to 12 hours usage. A dual hot-shoe and quarter inch socket mounting system makes it possible to fix the ATW-R1700 to a camera body, tripod or shoulder rig.
ATW-T1002 2.4GHz Transmitter - Handheld
Supplied within the ATW-1702 handheld system, the ATW-T1002 2.4 GHz handheld transmitter is fitted with a unidirectional dynamic microphone capsule. A 7-segment display identifies the numerical System ID. A soft touch switch in the base of the transmitter controls powering and mute. Coloured LED's confirm battery status and mute condition. An Input Level (Gain) control is located beneath a screw-off cover along with miniature screwdriver for precise adjustment. Includes AT8456a Quiet-Flex stand clamp.
ATW-T1001 2.4GHz UniPak Transmitter - Beltpack
Present in the ATW-1701 and ATW-1701/P1 body-pack systems, the ATW-T1001 UniPak beltpack transmitter uses the same 7-segment display and intuitive pairing sequence as other System 10 components. The lightweight (100g excluding batteries) plastic body incorporates a fixed antenna. Pairing and Level controls are located beneath the battery cover. Powering is via 2x 1.5v AA batteries (not included) which will provide approximately 7 hours of continuous use. Connection to lavalier and head worn microphones is via 4-pin locking HRS connector.
System performance: Frequency response: 20 Hz - 20 kHz. Operating frequency: 2.4 GHz ISM band. Noise: Greater than 109dB (A-weighted). Distortion: Less than 0.05% THD. Operating temperature: 0 to 40 degrees C. Operating range: 30m typical.
Optional accessories: AT829cW Lavalier microphone. AT831aW Lavalier microphone. ATM75cW Headworn microphone. PRO 8HECW Headworn microphone. 59-127 PROCELL MN1500 BATTERY, AA size, alkaline, 1.5V (pack of 10).