Verkauf : +44 191 418 1198 Email : verkauf@canford.de
Fiberfox from Neutrik is a range of hermaphroditic expanded beam fibre optic connectors designed to meet the requirements of MIL-DTL-83526 specifications and operate in harsh…
The Neutrik XX series is the successor to the 'industry standard' X series XLR cable connector, and offers several new features. It is available in 3, 4, 5, 6 and 7 pin…
The Neutrik XX series is the successor to the 'industry standard' X series XLR cable connector, and offers several new features. A version of the XX series for use with larger…
A version of the XX series with crimp contacts instead of the usual solder types. The crimp termination is with the standard 'B-crimp' tool (IEC standard IEC 60352-2). The…
A version of the XX series for use when style is important, these have a sexy, velour, chromium-plated shell. They also differ from the main XX series in having an extra-high…
A version of the XX series designed specifically to give enhanced RF screening, for example in live performance, critical recording or where there are particular local problems…
The XX-HD series are heavy duty XLR cable connectors for outdoor use. The all metal design is dust and water protected to IP67 when mated with XX-HD cable connectors or MPR-HD…
The “industry standard” XLR cable connector, easy to assemble and check in the field, with only 4 parts and no screws. Contact block is fibreglass reinforced hard plastic…
Cable connectors with nickel plated shell and silver plated contacts. These use the same shell, strain-relief etc as the X-series, with insulation displacement connections (pins…
A version of the X series designed specifically for the transmission of digital signals. The female connector features a coaxial ground spring which gives an accurate connection…
Heavy-duty, environmentally protected FX and MX. The FX-HD has a diecast zinc shell and one piece neoprene jacket with sealing lips, to protect the shell and latch mechanism from…
The Neutrik True Outdoor Protection (TOP) series was designed for the increasing demands on interconnection systems. In particular, in harsh environment applications, where…
The Neutrik True outdoor protection (X1-TOP) series is the newest iteration of Neutrik's heavy duty XLR range, featuring a new boot design the TOP series developed for the…
FXS A modified version of the 3FX socket, this incorporates a rotary switch with positive click action, labelled “on” and “off”. “Off” position shorts pins 2 and…
In-line switch XLR female one end, XLR male other end. Integral rotary on/off switch with positive click action, engraved legend. “Off” condition shorts pins 2 and 3. For use…
The RX Series is the right angle version of the XX cable connector series. The successor to the RC series, they offer several new features which make it easier to assemble and to…
The ConvertCon is a 'unisex' 3-pin connector, that converts between male and female by sliding the housing along the body. It is designed for emergency applications, avoiding the…
Universal metal-bodied housing common to most Neutrik connector ranges allows simpler metalworking and more flexibility of use. Panel cutout 24mm, connector can be mounted front…
The new D-LX series is the next generation development from the long-established D-L series, and features a compact all metal housing with an ingenious duplex ground contact…
A version of the D-LX series with crimp contacts instead of the usual solder types. The crimp termination is with the standard 'B-crimp' tool (IEC standard IEC 60352-2). The…
Similar to the D-L series, but with screw terminal connection in place of the solder cups. Cable range 0.128 sq.mm - 0.52 sq.mm. Black shell with gold-plated contacts. SCDR -…
Universal housing plastic shell connectors, without latch. Effectively these are plastic D-series connectors. Panel cutout 24mm, connector can be mounted front or rear of panel…
Plastic shell economically priced PCB mount connectors. Mounting holes compatible with D and G series. NC3FPRH With latch, gold plated…
Traditional style panel mount connectors. FP has 25mm panel cutout and latch which is pressed towards the panel to release. MP has 20mm panel cutout and both types are for…
Sealed male XLR panel connectors, specifically for use with Neutrik X-HD cable connectors to achieve a dust and water ingress sealing to IP65 rating. They have gold plated…
Plastic bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between centres, except HL and HR type 25.5mm). The A series…
These are a lower cost version of the Neutrik A series plastic-bodied XLR panel connectors from Neutrik. They have the smallest size and highest packing-density (23mm between…
Metal bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between centres, except HL and HR type 25.5mm). The B series offers…
FD-H and MD-H Universal metal-bodied housing series, for PCB mount applications. Designed for use where connector is mounted such that connector enters horizontally and PCB is…
These are a lower cost version of the Neutrik B series metal bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between…
These are special hybrid connectors which offer a cable style contact section mounted on a 'D' series mounting flange. They can be front or rear mounted, and have a black finish…
These feed-through 3-pin XLR adapters are mounted on a 'D' series mounting flange. NA3FDM has female contacts at the front and male at the rear, overall length 57mm. NA3MDF is…
Many pieces of equipment have two input connectors – a 3 pin XLR, low impedance balanced, often for microphones, and a 2 or 3 pole 6.35mm jack, usually high impedance unbalanced…
These second-generation, XLR / jack hybrid panel-mount connectors combine a 3-pole XLR female and 6.35mm 3-pole (stereo) jack socket in one XLR plastic housing, to give a…
The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are…
Glands with polyurethane strain reliefs give high protection to the cable against bending stresses. Glands supplied with connectors are black as standard, but are available with…
Colour coding rings are available to fit over the shell at the base of the gland, and are 6mm wide. They are suitable for use with standard 6mm wide labelling machine tapes. A…
A bench tool to press-fit the cable gland onto XX series XLR connectors.
Hand tools to aid assembly of the Neutrik XX series XLR connectors and X series jack plugs. They grip the gland securely, and enable it to be firmly tightened down onto the…
Glands with polyurethane strain reliefs give high protection to the cable against bending stresses. Glands are black as standard, but are available in nine colours as…
Colour coding rings are available to fit over the shell at the base of the gland, and incorporate a flat area 10mm × 6mm which can be engraved or accommodate a label. They can…
These hinged covers are suitable for all Neutrik D-series and Canford ‘Universal’ series connectors, and seal them, when unmated, from dust and water ingress to IP42. There is a…
Moulded splash-proof covers suitable for Neutrik panel connectors. Fit under front of connector, and have hinged cover piece. SCDF is suitable for XLR D-series female chassis…
These dust protection covers can be used in Neutrik D-series size panel connectors when no cable connector is mated. The cover is easy to use and does not block the connectors in…
A selection of push-fit protective rubber covers designed to fit most cable or panel connectors including XLR, EtherCon, or OpticalCon. Canford Protective Rubber Cap These…
A range of dummy plugs, incorporating a finger-grip, that can be used to blank off unused panel connectors, also to protect against ingress of dust. Each version helpfully has the…
Moulded plastic label holders, available in a variety of colours. Fit underneath ‘D’ series XLR connectors and other similar sized panel mount connectors (eg Neutrik locking jack…
These EPDM gaskets provide a dust and water resistant assembly for all D-shape panel connectors when mounted on the front face of panels. Overall dimensions 39.2mm x 34.2mm. …
Moulded plastic plates designed to blank off unused holes punched for Neutrik ‘D’ series XLR, jack and loudspeaker connectors (24 mm hole). 40-299 has M3 metal threaded inserts…
A two-part rectangular profile extruded case which enables custom adapters to be assembled. It accepts any D-series connector from Neutrik or Canford at each end. The two sections…
NF2C-B/2 This professional type of phono (RCA) connector has a special sliding shell element which protrudes (under spring loading) out of the shell, around the pin, and retracts…
Panel-mounting recessed RCA (phono) connectors, housed in a metal D-series size shell. Front of connector is flush with housing, to minimise risk of damage. Large centre-wire…
Right-angled metal bodied 3.5mm 3-pole jacks, with a chuck type strain-relief for secure cable retention. Accepts cables 2.0 - 4.5mm diameter. Available with nickel plated shell…
Heavy duty mono (2-pole) and stereo (3-pole) A-gauge 6.35mm jack plugs with slimline bodies and chuck-type strain relief. The overall diameter is 14.5mm, making them suitable for…
Heavy duty mono (2-pole) and stereo (3-pole) A-gauge, 6.35mm, right-angled jack plugs with slimline bodies and chuck-type strain relief. The overall diameter is 14.5mm, they…
Colour coding rings are available to fit over the shell at the base of the gland. They can be fitted whilst new connectors are being assembled, but can also be retrofitted to…
The Neutrik ‘Silent’ plug automatically mutes (shorts) an instrument cable, typically a guitar, to avoid pops and squeals when changing the instrument under load. The integrated…
Similar construction to standard Neutrik stereo jack plugs, but with BPO type B-gauge tip and slimline metal shell. Accept cable from 3.5 to 6.8mm diameter. Available with black…
Also known as miniature or tiny telephone type plugs. These plugs have solder contacts for cable termination, and a hex crimp for cable anchor with the cable strain relief locked…
These solder connection and horizontal PCB mounting panel mount 6.35mm jacks offer a wide variety of combinations of contacts and mounting options. They are available in mono and…
6.35mm PC mounting jack sockets, available in four versions. Separation of the mechanical latch and electrical contacts means that a high retention force can be achieved togeter…
NJ6TB-V 3 pole, 6.35mm PC-mounting jack sockets, all contacts switched ('normalled'). Separation of the mechanical latch and electrical contacts means that a high retention force…
These horizontal PCB mounting, panel-mount, 6.35mm jacks offer high packing-density by mounting on 15.88mm minimum centres in rows or arrays. They are available in mono and stereo…
3-pole jack sockets in panel mounted or in-line versions. Panel mount type can be front or reverse mounted (the latch bar must be removed if reverse mounted) in a 24mm cutout…
The Neutrik ‘Speakon’ loudspeaker/amplifier connectors are robust, versatile, easy to assemble, and are used extensively by amplifier and loudspeaker manufacturers as their…
The Neutrik 'Speakon' XX series loudspeaker/amplifier connectors are robust, versatile easy to assemble, and are used extensively by amplifier and loudspeaker manufacturers as…
The Neutrik ‘Speakon’ loudspeaker/amplifier connectors are used extensively by amplifier and loudspeaker manufacturers as their standard connector. These special panel-mount…
Claimed to be the “smallest multipin connector in the world”, this 3 pole connector series takes Neutrik to their smallest yet. The cable mount housing, with its largest outside…
The Minicon is an extremely compact modular connector, with “push-pull” locking mechanism and with piece parts available as required. The Minicon features up to 12 machined gold…
This is a complete plug connection system, allowing simplified production of cable and chassis connectors with up to 8 contacts, using only 8 components. The system consists of 3…
D-sub 9-pin and 15-pin feedthrough connectors mounted in D-series housings. Suitable for use with connection panels, connection plates, wallboxes, stageboxes or any application…
A range of ruggedized CAT6A RJ45 connectors, using proven Neutrik style body-shells, cable clamping, and positive latching mechanisms. These connectors are, fully CAT6A and PoE+…
A range of ruggedized CAT6A connectors, using proven Neutrik style body-shells, cable clamping, and positive latching mechanisms. The panel connectors are integrated into the main…
A range of ruggedised Cat 6 RJ45 connectors, using proven, Neutrik style body-shells, cable clamping and secure ‘push-pull’ latching mechanisms. These fully shielded connectors…
A range of ruggedized Cat5E connectors, using proven Neutrik style body-shells, cable clamping, and positive latching mechanisms. The panel connectors are integrated into the main…
A range of ruggedized RJ45 cable connector carriers, using proven Neutrik style body-shells, cable clamping, and positive latching mechanisms. The NE8MX series is the successor…
Panel-mounting recessed USB2.0 or USB3.0 connectors, housed in a metal D-series size shell. The front of the connector insert is flush with the housing, to minimise risk of…
Panel-mounting recessed Firewire 400 (IEEE1394) connectors, housed in a metal D-series size shell. The front of the connector insert is flush with the housing, to minimise risk…
This range of high quality BNC connectors offers excellent mechanical and electrical performance and simple assembly. Precision machined components give true 75 ohm impedance and…
High definition, 75 ohm, in-line, female-female cable adapter, with impedance-matched performance characteristics, suitable for up to 3Gb/s signals (such as SMPTE292M and…
A range of high quality BNC connectors, giving excellent mechanical, electrical and assembly performance. Precision machined components give accurate impedance and excellent…
A range of high quality BNC connectors, giving excellent mechanical, electrical and assembly performance. Precision-machined components give accurate impedance and excellent…
Panel-mounting recessed HDMI v2.0 connectors, housed in a metal D-series size shell. Suitable for 4K applications up to 60FPS. The front of the connector insert is flush with the…
'Powercon' offers 20 amp rating in a secure-locking, compact housing, and meets all current safety standards. The series offers a 3-pole connection, with pre-mating earth…
The 32 Amp Neutrik 'Powercon' is an extremely robust and reliable, locking, single-phase, AC mains power connector. It is available in cable and panel versions for use on…
A robust and economical range of stageboxes, available in three versions, each in three lengths. Each box comprises a pair of plastic moulded end-plates which also serve as feet…
This design of jackfield uses a modular jack socket pair which has normalling set by jumper bars within the module. Contacts are gold plated, and have a similar design to that of…
An economic and versatile design using stereo A-gauge jacks, offering a considerable cost saving on B-gauge jackfields. They have two rows of 24 jacks housed in a 1U panel, with…
This essential cleaning kit for opticalCON Duo and Quad cable and chassis connectors is also suitable for ST, SC and FC connectors and couplers. Two cleaning methods are…
Mit den opticalCON ADVANCED Serie hat Neutrik das ursprüngliche opticalCON System verbessert. Alle ADVANCED Stecker sind mit einem extrem robusten Kunststoffüberzug, einem…
Neutrik have improved on the original opticalCON with the introduction of the opticalCON ADVANCED range. All ADVANCED cable connectors have an extremely rugged protective rubber…
These industry standard, hybrid fibre, HD camera cable breakout assemblies use Neutrik opticalCON ADVANCED DUO and QUAD cable connectors, offered in a variety of lengths, to ST…
OpticalCON / powerCON Hybridkabel kombinieren bis zu acht Lichtwellenleiter sowie eine 240 V AC, 16 A Spannungsversorgung in einem Kabel. Um eine dauerhafte Flexibilität zu…
Diese vorkonfektionierten Kabel enthalten bis zu zwölf in einer gemeinsamen Hülle zusammengefasste Einzelfasern und sind mit 1 Meter langen, mit opticalCON ADVANCED Duo oder…
Der opticalCON ADVANCED MTP Kabelstecker im bewährten MTP-Format kann zwölf optische Multimode PC- bzw. Singlemode-APC-Kanäle aufnehmen. Das Vollmetallgehäuse bietet eine…
The Neutrik opticalCON LITE DUO range is a semi rugged, cost effective, light weight and compact system designed for both temporary and permanent installations. Easy to clean with…
The Neutrik opticalCON LITE QUAD range is a semi rugged, cost effective, light weight and compact system designed for both temporary and permanent installations. Easy to clean…
The Neutrik opticalCON LITE MTP range is a semi rugged, cost effective, light weight and compact system designed for both temporary and permanent installations. Easy to clean with…
Rugged pulling-socks designed to protect opticalCON connector assemblies during installation or deployment. Two versions are available, suitable for single connector assemblies or…
This housing enables an opticalcon Advanced DUO or QUAD cable assembly to be economically 'broken-out' to individual fibres. A chassis connector mounts to the right-angle housing…
A range of 19 inch rack termination panels to accommodate opticalCON, or combinations of opticalCON, SC, ST, E2000 and LC fibre connectors. All feature angled front panels to…
HDMI patch cables from Neutrik with overmolded flex relief and rugged metal shells designed to mate and lock with the NAHDMI panel connectors. Available in 1m, 3m, 5m and 10m…
These Category 6 compliant, screened patchcords are made using double-screened Cat6 S/FTP LFH cable, and have Neutrik NE8MC-C6 Ethercon Cat6 connectors at each end. These handle…
These Category 6 compliant, screened, adapter patchcables are made using Cat6 FTP cable, and have Neutrik NE8MC-C6 Ethercon Cat6 connectors at one end and a conventional RJ45 at…
A range of crimp tools, and die sets, required to assemble Neutrik Rear Twist and Push-Pull series BNC connectors. Crimp dies are supplied as a pair and must be ordered in…
A parallel press tool to assist in ethercon CAT6A cable and panel connector termination.
A range of handy adapters from Neutrik featuring various BNC and XLR options. SKU Model number Input Output 49-171 NADITBNC-F Female chassis type…
Neutrik NA2-IO-DLINE is an end-of-network breakout box which allows two XLR line-inputs to be integrated into a Dante network. Simultaneously, it can convert a Dante stream into…
A range of high quality PCB mounting transformers. A complete set of performance graphs and circuit application notes is available free on request, order code 02-018. …
Canford Audio Limited ist im Gesellschaftsregister von England und Wales eingetragenHandelsregister Nr. 1385727Umsatzsteuer Identnummer: GB 660 1163 71
