Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

3 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

NEUTRIK NAO4MW-A OPTICALCON ADVANCED QUAD COUPLER, Multimode

Artikelnummer
46-4041
Hersteller
Neutrik
Typennummer
  • NAO4MW-A
  • NAO4
NEUTRIK NAO4MW-A OPTICALCON ADVANCED QUAD COUPLER, Multimode
NEUTRIK NAO4MW-A OPTICALCON ADVANCED QUAD COUPLER, Multimode

NEUTRIK OPTICALCON ADVANCED QUAD - Rugged LC duplex fibre connector system

Neutrik have improved on the original opticalCON with the introduction of the opticalCON ADVANCED range. All ADVANCED cable connectors have an extremely rugged protective rubber coating with integral anti-kink strain-relief boot and a rubber-coated metal, latching cap attached by a steel lanyard. (The metal latching cap and connector front housing is available separately to upgrade older assemblies, see SCNO below.) The opticalCON ADVANCED QUAD system is designed around the duplex LC optical connector, housed in a ruggedised latching body. They are suitable for point-to-point audio, data or camera connection use in all environments such as studio floors, touring, rental and outside broadcast. The cable connectors are supplied pre-assembled only, onto a choice of four-fibre, or twelve-fibre triple-split breakout cables. The chassis connector rear accepts two conventional LC-Duplex connectors. Unlike opticalCON DUO which will accept either opticalCON DUO assemblies or standard LC connectors at the front face, opticalCON QUAD will only mate with opticalCON QUAD cable assemblies at the front.

Fibres within both chassis and cable connectors are protected from dirt when unmated by integral, automatic, sealing-shutters with silicone gaskets, which lift when the connectors are mated. The shutters also block laser emission, should a source be left switched on inadvertently. Connector housings have an extremely hard-wearing black chrome finish.

Multimode (MM), 50/125 micron, PC style assemblies are available as well as singlemode (SM), 9/125 micron, assemblies, in either PC or APC style. Please note that LC cables fitted to the rear of the chassis connector MUST match the mating opticalCON QUAD assembly type. Connections between MM 50 micron and either 62.5 micron or other fibre sizes may cause losses of 3dB or more.

Cable Connectors

Cable Assemblies

Panel Connector

Panels

Couplers


NAO4

These allow opticalCON QUAD cables to be joined inline; they are IP65 rated when mated.

NAO4MW-A Multimode Black insert
NAO4SW-A Singlemode Blue insert

Crossed fibre connection couplers are available to special order, contact Sales.

Accessories