Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

7 Januar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

RDL EZ-HSX4 INPUT SWITCHER Audio, stereo, 4x1, with headphone amplifier, RCA (phono) I/O, AC adapter

Artikelnummer
57-4916
Hersteller
RDL (Radio Design Labs)
Typennummer
  • EZ-HSX4
RDL EZ-HSX4 INPUT SWITCHER Audio, stereo, 4x1, with headphone amplifier, RCA (phono) I/O, AC adapter
RDL EZ-HSX4 INPUT SWITCHER Audio, stereo, 4x1, with headphone amplifier, RCA (phono) I/O, AC adapterRDL EZ-HSX4 INPUT SWITCHER Audio, stereo, 4x1, with headphone amplifier, RCA (phono) I/O, AC adapter

Bestellangaben

MwSt. / Versand
429,43 
pro Stück (zzgl. MwSt.)
Dieses Produkt wird speziell für Ihre Bestellung eingekauft, lieferbar in Kontaktieren Sie uns.

RDL AV INTERFACES - EZ Series

The EZ-Series offers a wide range of stand-alone designs including distribution amplifiers for line level audio, headphones, composite and XGA/XGA video, audio pre-power and mixer amplifiers, AV input selectors and computer video selectors. All models may be connected and operated without the use of tools, using standard cables. They are housed in enclosures with the same height, with widths in increments of one sixth of a rack-width, so they may be mounted singly or in multiples in a range of accessory mounts. Audio and video are switched using solid-state circuitry to avoid degradation due to dirty switches; critical connectors are gold-plated for reliable connections.

PRO-INTERFACES

DISTRIBUTION AMPLIFIERS - Audio

HEADPHONE AMPLIFIERS

ISOLATION TRANSFORMERS

INPUT SELECTORS

These compact switchers allow the user to select one of four stereo, unbalanced, line-level audio sources to a single stereo output using solid-state switching to avoid distortion due to dirty switch contacts. A gain control is provides which may be used to adjust the output level. Models are offered with and without a headphone amplifier, which is fed by the same selector switches. A range of mounting accessories is available for the Radio Design Labs EZ-series.


EZ-SX4 - 4x1

This is similar to the EZ-HSX4; the front panel is the same except that there are no headphone sockets. The rear panel is also similar to the EZ-HSX4, except that there is no switch to select whether the output is fixed or adjustable; the output is permanently controlled by the level control on the front panel.

Inputs: -10dBV nominal, +10dBV maximum, 10 kohms. Level control: Off to +12dB gain. Response: 10Hz-20kHz +\-0.05 dB. Distortion: Better than 0.03% THD+N. Noise: -80dB referred to -10dBV. Crosstalk: -70dB, 1 kHz. Outputs: -10dBV nominal, +17dBV maximum. Power source: 24V DC, 30mA idle, 60mA maximum. Dimensions: 146 x 76mm (w x d). Mounting size: 1/3 rack width.

Included accessories: PS-24AX-UK AC power adapter with UK AC supply contact-pin assembly.
Optional accessories: PS-24AX-EU AC power adapter with Euro AC supply contact-pin assembly.


EZ-HSX4 - 4x1 - With headphone amplifier

The front panel has four switches to select the input source and a rotary control to adjust the output level. Both 6.35mm and 3.5mm stereo jack sockets are provided for the headphone output, which follows the level set by the rotary control. An LED shows the presence of power. The rear has four pairs of RCA (phono) sockets for the four stereo line inputs and a further pair of similar sockets for the line outputs. A switch selects whether the output will be fixed, so the level control on the front panel only controls the headphone output, or adjustable, in which case the level control adjusts the level of both. A locking co-axial connector provides the power input.

Inputs: -10dBV nominal, +10dBV maximum, 10 kohms. Level control: Off to +12dB gain. Response: 10Hz-20kHz +\-0.05 dB, line output; +\- 1.25dB, headphone output, 100 ohms load. Distortion: Better than 0.03% THD+N, line output; 0.1% THD+N, headphone output, 10 mW, 100 ohms load. Noise: -100dB referred to 10mW output, 100 ohms load, headphone output; -80dB referred to -10dBV, unity gain, variable output; -95dB referred to -10dBV, fixed output. Crosstalk: -70dB, 1 kHz. Outputs: -10dBV nominal, +10dBV maximum, fixed output; +17dBV maximum, variable output; 35mW, 100ohms load, headphone output. Power source: 24V DC, 40mA idle, 50mA maximum. Dimensions: 146 x 76mm (w x d). Mounting size: 1/3 rack width.

Included accessories: PS-24AX-UK AC power adapter with UK AC supply contact-pin assembly.
Optional accessories: PS-24AX-EU AC power adapter with Euro AC supply contact-pin assembly.


EZ-AVX4 – 4x1 – Video and audio

abgekündigt

The front panel has four push buttons to select one of the four sources. An LED indicates when power is present. The rear panel has four pairs of RCA (phono) sockets for the connection of the audio sources, and pair of similar sockets for the audio outputs. There are five further RCA (phono) sockets for the four composite video inputs and the selected video output. A locking co-axial connector provides the power input.

Audio Inputs: -10dBV nominal, +10dBV maximum, 10 kohms. Response: 10Hz-20kHz +\-0.01 dB. Distortion: Better than 0.02% THD+N. Noise: -80dB referred to -10dBV. Outputs: -10dBV nominal, +10dBV maximum.
Video inputs: 1Vp-p, 75 ohms. Bandwidth: Greater than 350 MHz. Differential gain: 0.1%. Differential phase: 0.1%. Off attenuation: Better than 40dB, 10M Hz. Noise: -90 dB, referred to 1Vp-p video, 75 ohms. Output: 1Vp-p, 75 ohms. Power source: 24V DC, 85mA idle, 100mA maximum. Dimensions: 146 x 127mm (w x d). Mounting size: 1/3 rack width.

Included accessories: PS-24AX-UK AC power adapter with UK AC supply contact-pin assembly.
Optional accessories: PS-24AX-EU AC power adapter with Euro AC supply contact-pin assembly.


EZ-VM22E - Two outputs – Video, VGA, XGA

abgekündigt

This is a computer video source selector and distribution amplifier with two inputs. It is aimed at AV applications in such environments as conference rooms, restaurants and clubs where it is necessary to feed more than one computer monitor or projector from a choice of two computers.

The front panel has an LED to indicate power, two 15-pin HD D-sub connectors for the two inputs each with a switch offering a choice of connecting the local monitor and input ID bits, or not. A 'Sync' switch offers a choice between standard TTL or RGBHV 75 ohm video. A third switch selects which input is fed to the outputs. On the rear, power is connected through a locking co-axial connector. Two 15-pin, HD D-sub connectors offer separately buffered outputs for the local monitor and the second monitor or projector. Two trimmers set the equalisation and gain for the second monitor output.

Inputs: VGA to QXGA RGBHV or RGB with combined sync. Gain: 0dB, local monitor output; 0 to +6dB other output). Equalization (peaking): 0 to +8dB at 50MHz. Video bandwidth: Greater than 470 MHz. Output offset: +\- 5mV typical, 75 ohm load. Sync (HV) input: TTL, 500 ohms or video, 0.7V to 5V p-p, 75 ohms. Sync (HV) output: 5V TTL. Sync (HV) propagation delay: Less than 4nS typical. Sync (HV) rise time: Less than 4nS typical. Sync (combined): Output follows input. Power source: 24V DC, 70mA idle, 80mA maximum. Dimensions: 146 x 127mm (w x d). Mounting size: 1/3 rack width.

Included accessories: HD D-sub input cable, PS-24AX-UK AC power adapter with UK AC supply contact-pin assembly.
Optional accessories: PS-24AX-EU AC power adapter with Euro AC supply contact-pin assembly.


EZ-VM24E - Four outputs – Video – VGA, XGA

abgekündigt

This is similar to the EZ-VM22E, but with four 15-pin, HD D-sub connectors offering separately buffered outputs. Two trimmers set the equalisation and gain for the second, third and fourth monitor outputs. Specifications and accessories are the same as the EZ-VM22E, except as follows. Power source: 24V DC, 70mA idle, 90mA maximum.

MICROPHONE COMPRESSORS

PRE-AMPLIFIERS

MIXERS

MIXER AMPLIFIERS

POWER AMPLIFIERS

DISTRIBUTION AMPLIFIERS - Video

MOUNTING ACCESSORIES

These include a free-standing case and rack-mounting adapter for multiple units, fixed desktop mounts, under-shelf brackets and through-surface bezels for the Radio Design Labs EZ-series of audio and video equipment.

The EZ-Series offers a wide range of stand-alone designs including distribution amplifiers for line level audio, headphones, composite and XGA/XGA video, audio pre-power and mixer amplifiers, AV input selectors and computer video selectors. They are housed in enclosures with the same height, with widths in increments of one sixth of a rack-width, so they may be mounted singly or in multiples in this range of accessory mounts.


EZ-SMB1, EZ-SMB2 Bezels - For Surface-Mounting

These may be used to mount an EZ Series product in any flat surface. The bezel serves to hide the edge of the cut-out through the surface; the EZ Series product fastens to the bezel with only two screws. The EZ-SMB1 mounts a 1/6th rack-width item. Dimensions: 104 x 69(w x h). Cut-out: 79 x 44(w x h). The EZ-SMB2 mounts a 1/3rd rack-width item. Dimensions: 178 x 69(w x h). Cut-out: 152 x 44(w x h).


EZ-CC6 Component Chassis - Free-standing Housing

The EZ-CC6 is a steel case for free-standing use, which will take EZ Series products up to six increments of 1/6th rack width. The front and rear, as supplied are open. The cover lifts off the base after four screws are removed. The base plate is punched for fasteners to mount active products, storage drawers or filler panels to fill the remaining open space at the front. The rear is left open for cable access.


EZ-DC1, EZ-DC2 Desktop Chassis

Made from folded steel, in a wedge-shape, the EZ-DC1 is for mounting an EZ-series 1/6th rack width product above a surface, with the front panel at an angle. The chassis covers a cable port in the desk-top and provides space for excess wire. The bottom is open to give a large area for access to the cable port; the top is also open underneath the mounting position for either a 76mm or 127mm deep EZ Series product. The rear is open for cable access. The chassis is fixed to the desk top, the cables are drawn through the cable port and out of the rear of the chassis. The EX Series product is screwed to the chassis then the cables are brought up from below and connected. The EZ-DC2 is the same as the EZ-DC1 except that it mounts a 1/3rd rack-width EZ Series product.


EZ-FP1 Filler Panel

These are used to fill in space in the front panel when the EZ-RA6 or EZ-CC6 are not fully occupied with other EZ Series products. They mount to the base with two screws.


EZ-RA6 Rack Adapter

This is a rack-shelf designed to mount EZ Series products up to six increments of 1/6th rack-width in 1U of a 19 inch rack. The front and rear are open; the base is punched to fix EZ Series active products, storage drawers and filler panels at the front. When mounted in a rack, it is possible to release two screws at the rear, allowing the base-plate to slide forward so that items may be installed without removing the shelf from the rack.


EZ-SD1, EZ-SD2 Storage Drawers

These may be used in an EZ-CC6 Component Chassis or EZ-RA6 Rack Adapter to provide useful storage space for adapters and cables, as an alternative to filler panels. The drawer base slides into grooves in the base of the EZ-CC6 or EZ-RA6. The EZ-SD1 takes up 1/6th of a rack width. The EZ-SD2 is 1/3rd rack width.


EZ-UCB2 Under-Counter Brackets

These are simple, folded-metal brackets which snap on to the case of an EZ Series product, which can then be secured to the brackets with screws. The brackets, in turn, can then be screwed to the underside of a counter or shelf. (Suitable screws should be chosen to suit the material of the shelf or counter, they are not included.)