Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

28 Dezember 2024
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

RDL TX-AFC1F AUDIO CONVERTER Balanced to unbalanced, XLR3F to RCA (phono)

Artikelnummer
57-2403
Hersteller
RDL (Radio Design Labs)
Typennummer
  • TX-AFC1F
RDL TX-AFC1F AUDIO CONVERTER Balanced to unbalanced, XLR3F to RCA (phono)
RDL TX-AFC1F AUDIO CONVERTER Balanced to unbalanced, XLR3F to RCA (phono)

Bestellangaben

MwSt. / Versand
244,80 
pro Stück (zzgl. MwSt.)
Dieses Produkt wird speziell für Ihre Bestellung eingekauft, lieferbar in 1‑2 Wochen. Brauchen Sie diesen Artikel schneller? Rufen Sie uns an

RDL AV INTERFACES - TX Series

RDL TX series is a range of small enclosed “black boxes” offering a simple, high quality solution to temporary or permanent interfacing, communication and distribution problems especially in theatre, PA and broadcast.

All TX series modules measure 76 x 30 x 36mm. They are the same 'family' as the Stick-on series, but are devices where the ST-type housing, with screw terminal connections, is unsuitable, eg. where the use of connectors is required.

Included accessories: All models are supplied with a data sheet with installation details.

AUDIO CONVERTERS

These modules are intended to interface consumer audio equipment with professional balanced-line circuits, providing galvanic isolation in addition by the use of transformers, to avoid ground-loops and thus reducing hum.


TX-A2 - Balanced to unbalanced - Terminals, RCA (phono)

This converts a single, balanced, line input into two unbalanced outputs, with a reduction in level to suit the inputs of equipment such as consumer audio and video equipment, using a 'studio-quality' transformer for isolation. The front panel of the aluminium enclosure has a detachable terminal block for the input and two gold-plated RCA (phono) connectors for the outputs. Each output is coupled through an attenuation network that produces a nominal -10dBV level.

Input: +4dBu nominal, +22dBu max, detachable terminal block. Outputs: -10dBV, nominal. Response: 20Hz - 20kHz +/- 0.5dB. Distortion: 0.05%, 20Hz - 20kHz, +4dBu input; 0.01%, 1kHz. Dimensions: 61 x 76 x 40mm.


TX-A2D - Balanced to unbalanced - Terminals, RCA (phono) - dual

Similar to the TX-A2, this converts two balanced line inputs each into a single unbalanced output using two transformers, again with attenuation to suit consumer equipment. The front panel has two detachable terminal blocks for the inputs and two gold-plated RCA (phono) connectors for the outputs.

Technical specifications: As the TX-A2, except the following. Crosstalk: -80dB, 20hz - 20 kHz, referenced to -10dBV; -90 dB, 1kHz.


TX-AFC1F - Balanced to unbalanced - XLR3F, RCA (phono)

This converts a single, balanced, line input into a single unbalanced output, with a reduction in level to suit the inputs of equipment such as consumer audio and video equipment, using a 'studio-quality' transformer for isolation. The front panel has a 3-pole, female XLR connector for the input and a single gold-plated RCA (phono) connector for the output.

Input: +4dBu nominal, +22dBu max, 10k ohms. Output: -10dBV, nominal. Input balance: 85dB CMRR, 50-60Hz. Response: 20Hz - 20kHz +/- 0.1dB. Distortion: 0.06%, 50Hz - 20kHz, +4dBu input; 0.0015%, 1kHz. Dimensions: 61 x 76 x 40mm.


TX-AFC1M - Unbalanced to balanced - RCA (phono) to XLR3F

This converts a single unbalanced circuit, from, for example, the output of consumer audio and video equipment, to a balanced signal for use over longer distances and to avoid hum, since it uses a 'studio quality' transformer to provide galvanic isolation. The front panel has a single RCA (phono) connector for the input from the unbalanced equipment and a 3-pole male XLR for the output.

Input: -10dBV nominal, +22dBu max, 10k ohms. Insertion loss, input to output: 0.25dB, 20 ohms source, 10k ohms load. Response: 20Hz - 20kHz +/- 0.1dB. Distortion: 0.06%, 50Hz - 20kHz, -10dBV input; 0.0015%, 1kHz. Dimensions: 42 x 76 x 40mm.

AUDIO TRANSFORMERS

VIDEO SWITCHES

CONTROLLED RELAYS

MIXERS

AMPLIFIERS

FORMAT-A SENDERS

FORMAT-A RECEIVERS

FORMAT-A COMBINERS

FORMAT-A POWER INSERTERS