Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

19 Dezember 2024
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

SONIFEX RB-DDA6A-2P DISTRIBUTION AMPLIFIER Audio, AES/EBU digital, 1x6, 7x XLR, dual PSUs

Artikelnummer
95-6075
Hersteller
Sonifex
Typennummer
  • RB-DDA6A-2P
SONIFEX RB-DDA6A-2P DISTRIBUTION AMPLIFIER Audio, AES/EBU digital, 1x6, 7x XLR, dual PSUs
SONIFEX RB-DDA6A-2P DISTRIBUTION AMPLIFIER Audio, AES/EBU digital, 1x6, 7x XLR, dual PSUs

Bestellangaben

MwSt. / Versand
712,80 
pro Stück (zzgl. MwSt.)
Dieses Produkt wird speziell für Ihre Bestellung eingekauft. Bei Stornierung können Gebühren entstehen, lieferbar in 4‑6 Wochen. Brauchen Sie diesen Artikel schneller? Rufen Sie uns an

ähnliche Produkte

SONIFEX REDBOX AUDIO/VIDEO PROCESSORS

Sonifex Redboxes were introduced in 1999 and were designed for systems integrators. They are very well received in both Broadcast and studio industries. The series of signal processors that include headphone amplifiers, mix-minus generators, silence detectors, tone generators, distribution amplifiers, audio converters and more, are built in two different extrusions, with front and rear panels screwed to the extrusion.

ACOUSTIC ECHO CANCELLERS

AUDIO CONVERTERS - A/D & D/A

AUDIO CONVERTERS - UNBALANCED TO BALANCED/BALANCED TO UNBALANCED

AUDIO CONVERTERS - STEREO TO MONO

AUDIO EMBEDDERS AND DE-EMBEDDERS

CONTRIBUTION UNITS

DELAY SYNCHRONISERS

DIGITAL AUDIO DELAYS

DIGITAL VIDEO DISTRIBUTION AMPLIFIERS

DISTRIBUTION AMPLIFIERS

Housed in red-anodised aluminium cases with apertures for fixing screws, this range of rack mounting distribution amplifiers have been designed to properly distribute audio signals to varying outputs.


RB-DA6 - Distribution Amplifier, XLR Connectors

A multi-function distribution amplifier offering either six-way stereo, dual six-way mono, or twelve-way mono operation. The front panel has a power indicator, two pre-set input gain controls and a recessed switch to select mono or stereo operation.

There are two inputs using 3-pin XLR connectors, which may be fed with dual mono sources or a single stereo source to feed six outputs. Alternatively, one mono input can be distributed to twelve outputs. All audio connections may be wired balanced, or unbalanced, without loss of level, for use with domestic equipment. Power is connected using an IEC inlet, which has an associated fuse and voltage selector switch. All connections are on the rear panel.

Input: +28dBu maximum, 20kohms, balanced. Common-mode rejection: Greater than 66dB. Gain: -8dB to +18dB, adjustable separately for each input. Response: 20Hz to 20kHz +/- 0.1dB. Distortion: 0.01% THD, 1kHz, +8dBu. Noise: -100dB, unity gain, +8dBu output. Output: +28dB maximum, 50 ohms, balanced. Power source: 110-120V or 220-240V AC 6W maximum, switchable, fused, IEC Inlet. Dimensions: 1U rack mounting, 108mm deep. Weight: 1.3kg.

Included accessories: Handbook and IEC AC power cable. UK 13A plug.
Optional accessories: RB-RK3 rack kit.


RB-DA6P - Distribution Amplifier, Phoenix Connectors

Sharing the specifications and accessory set of the RB-DA6 audio distribution amplifier, this uses Neutrik 'Phoenix' style terminal connectors instead of XLR inputs and outputs. The rear is fitted with fourteen 3-pole connectors. Each DA is shipped with the mating connectors so that wires can be simply terminated using a small flat-blade screwdriver.


RB-DA6G - Distribution Amplifier, XLR Connectors, Gain Trims

This variant has the specifications and functionality of the RB-DA6, however it has twelve separate output gain-adjustment trimmers on the front panel. Accessories as RB-DA6


RB-DA6R - Distribution Amplifier, RJ45 Connectors

Again based on the RB-DA6 (see above), this design differs in the inputs available and the output connectors. The two balanced XLR connectors remain as inputs, wired in parallel with a single RJ45 connector carrying the two balanced signals. A push switch on the rear selects between either these balanced connections or a pair of RCA (phono) sockets, offering unbalanced inputs. The outputs are available from six RJ45 sockets, each carrying a pair of signals. All RJ45 connectors are wired to the 'StudioHub+' standard, and can be used to connect to other equipment or infrastructure using low-cost standard RJ45 patch cords.

Specifications and accessories: As RB-DA6, excepting the following. Input impedance: 10k ohms, unbalanced.


RB-DA6RG - Distribution Amplifier, RJ45 Connectors, Gain Trims

This variant is identical to the RB-DA6R with the addition of individual output gain adjustment, instead of global stereo gain adjustment. It has twelve separate output gain-adjustment trimmers on the front panel.


RB-DA4x5 - Distribution Amplifier/Mixer

This model has four mono 3-pin XLR inputs, and four groups of five outputs on 15-pin, male D-sub connectors. All inputs and outputs can be wired balanced, or unbalanced, without loss of level, for use with domestic equipment. Each output has a separate buffer amplifier so that loading or a short circuit on one output of a group does not affect the others.

Front panel has four, tri-colour LED audio presence indicators to show the input signals or the level of the output groups, selected by a single switch. A removable panel conceals four gain trimmers for inputs and four for output level. Miniature switches configure the internal routing; each of the four output groups is fed from a mix of the four input signals or a test tone signal.

Specification as RB-DA6 except the following. Power consumption: 9W maximum. Depth: 158mm. Weight: 1.6kg.

Included accessories: Handbook and IEC AC power cable. UK 13A plug.
Optional accessories: RB-RK3 rack kit.


RB-MS4x3 - Distribution Amplifier

This passive ‘quad’ distribution amplifier has four mono microphone or line level (accessed by using a 30dB pad switch located on front facing panel) 3-pin XLR inputs, each with three 3-pin XLR outputs. Of the three outputs, the first is a direct link whist outputs 2 and 3 are isolated with optional ground lifts – activated via toggle switches on the front panel. The front panel also has a push switch for external +48V phantom power, with a red LED to indicate phantom power active, as well as the push switch for the 30dB pad. This is replicated across the four channels.

Powered via external +48V DC phantom power on 2.5mm socket. Dimensions (WxDxH): 480 x 108 x 42mm. Weight: 1.5kg.

Optional accessories: RB-RK3 rack kit.


RB-AES4x3 - Distribution Amplifier, Digital Audio

Similar to the RB-MS4x3, however the RB-AES4x3 passive ‘quad’ distribution amplifier requires no power to operate and has four AES digital inputs via 3-pin XLR, along with three 3-pin XLR AES outputs for each of the four inputs. 110ohm termination can be applied to unconnected outputs.

Dimensions (WxDxH): 480 x 108 x 42mm. Weight: 1.4kg.


RB-DDA6A – Distribution Amplifier, Digital AES/EBU format

For the distribution of digital audio data in AES/EBU format, the RB-DDA6A has a single 3-pin female XLR for the input and six 3-pin male XLR connectors for the outputs, all on the rear, where there is also an IEC power inlet, fuse and voltage selection switch. The front has an LED to indicate power. Mounting flanges at each side provide for mounting to flat surfaces or the DA may be rack mounted using optional accessory panels. It accepts input sample rates in the range of 30kHz - 100kHz, and bit rates of 16, 20 and 24 bits, so can be used for standard CD signal distribution as well as for high quality 24-bit 96kHz work

Inputs and outputs: 2V / 7V peak-to-peak, minimum / maximum, balanced, 110 ohms +/-20%, balanced. Sampling rates include: 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz and 96kHz. Power source: 110-120V or 220-240V AC, 6W maximum, switched, fused. Dimensions (WxDxH): 280 x 108 x 42mm. Weight: 0.95kg.

Included accessories: Manual, AC power cable.
Optional Accessories: RB-RK1, RB-RK2.


RB-DDA6A-2P – Distribution Amplifier, Digital AES/EBU format

Has the same I/O options as the RB-DDA6A, with additional IEC power inlets for redundancy protection. Automatic load-sharing between the two supplies in case of power supply failure. If both supplies fail the input is connected directly to output 1. Function of each supply is indicated by red LEDs positioned on the front panel. The rear has a 9-pin female D-sub connector which is connected to a changeover relay to indicate the status of each supply. This is normally closed to indicate power fail and once the supply is working correctly the relay activates to make a normally open contact.

Specifications: As the RB-DDA6A above except the following. Power source: 85-264V, 6W maximum. Dimensions (WxDxH): 480 x 108 x 42mm. 1U rack-mounting. Weight: 1.5kg.


RB-DDA22 – Distribution Amplifier, Digital AES/EBU format

Use for distributing digital audio data in many formats, repeating both the audio data and the status information of the input whilst re-clocking the data and re-normalising to the appropriate standard digital audio levels, the RB-DDA22 accepts one of five different digital input types, including 3-pin female XLR for the AES/EBU input, female BNC connector for the AES-3id input, RJ45 AES/EBU input, RCA (phono) S/PDIF input and a TOSLink digital audio optical input. Output up to 22 digital outputs of five different connector types including six 3-pin male XLR connectors, six RJ45 sockets providing balance AES/EBU outputs, six female BNC connectors provide AES-3id outputs, RCA phono sockets for S/PDIF, and two optical TOSLink outputs. All connections are housed on the rear panel along with IEC power inlet with adjacent fuse holder.

The front panel has an input select button, to select the input to be used, and seven indicator LEDS to show the input selected, valid signal presence, or the operational frequency.

Inputs and outputs: 3V/10V peak to peak, minimum /maximum, 110ohms +/-20% AES/EBU, balanced; 0.5V+/-20% minimum, peak to peak, 75ohms +/-5% S/PDIF, AES-3id, unbalanced. Bit depth: Up to and including 24 bits. Sampling: 32, 44.1, 48, 88.2, 96,176.4 or 192kHz. Power source: 85-264V AC, 47- 63Hz, 10W maximum. Dimensions (WxDxH): 480 x 108 x 42mm. 1U rack-mounting. Weight: 1.4kg.

Included accessories: Manual, AC power cable.
Optional accessories: RB-RK3 rack kit.


RB-DDA6S – Distribution Amplifier, S/PDIF

Intended for use in professional TV and radio application and designed for distribution of audio from a consumer CD player to multiple digital recorders, the RB-DDA6S has a single digital S/PDIF RCA (phono) input and six RCA outputs which repeat both the audio data and the status information of the input whilst re-normalising to standard levels. All sample rates in the range of 30kHz - 100kHz, and word lengths of 16, 20 and 24-bits are accepted.

Input impedance: 75 ohms ±5%. Signal level: 0.5 V ±20% peak-to-peak. Output impedance: 75 ohms ±5%. Sample frequency range: 30-100kHz. Power source: 110-120V or 220-240V AC 6W maximum, switchable, fused, IEC Inlet, lead supplied, UK 13A plug.

Optional accessories: RB-RK1, RB-RK2.

HEADPHONE AMPLIFIERS

ISOLATION UNITS

LIGHT SWITCHING UNITS

LIMITERS

MIX-MINUS GENERATORS

PREAMPLIFIERS

PROFANITY DELAYS

SAMPLE RATE CONVERTERS

SILENCE DETECTORS

SOURCE SELECTORS

TRANSMISSION SWITCHERS

TONE GENERATORS

ACCESSORIES