Verkauf : +44 191 418 1198 Email : verkauf@canford.de
A range of attenuators, electret microphone adapters and microphone pre-amplifiers which, though designed originally for use with Ampetronic induction loop drivers, are useful in…
Ampetronic microphones are designed to combine with Ampetronic induction-loop amplifiers to give convenient amplified speech transmission. Miniature tie-clip, desktop and boundary…
CMR3 A receiver designed for measuring the performance of audio frequency induction-loop systems in accordance with the requirements of the international defining standard EN…
FSM - IEC60118-4 A compact, ergonomically designed, hand-held instrument for measuring the performance of virtually any induction loop system, for use in regular monitoring or…
The Ampetronic induction loop receiver is a small, very efficient, high quality receiver for use with induction loop systems. This receiver can be used in locations where a…
These electret microphones are offered as replacements or alternatives for use with the Signet AFILS systems provided with a 3.5mm microphone socket. AMT – Tie clip An…
These are a range of audio 'input plates' which fit in a UK standard (BS1363/BS4662), 25mm deep, single or dual-gang, electrical back-box. Designed to increase the audio input…
SigNET's range of loop testing equipment have been designed to allow AFILS installers and service engineers to correctly set up and test induction loop systems. RXTI2 - Loop…
Copper foil tape, 18mm wide, 0.1mm thick (1.8mm²), insulated with 0.05mm thick Melinex tape bonded to the foil. Approximate resistance 1ohm/100m. Specifically intended for…
A range of Contacta signage to aid visual confirmation of usable hearing loop system in the area of display. Often used in areas such as restaurants, shops, post offices, banks…
Canford Audio Limited ist im Gesellschaftsregister von England und Wales eingetragenHandelsregister Nr. 1385727Umsatzsteuer Identnummer: GB 660 1163 71
