LYNX YELLOBRIK ORX 1702-ST FIBRE RECEIVER Analogue sync and video, 1x SM ST, 1260-1620nm RX

LYNX yellobrik OTX 1712 or OTX 1742 CWDM ('Coarse Wavelength Division Multiplexing') transmitters, combined with an ORX 1702 receiver, overcome the restrictions involved in the distribution of broadcast-quality, analogue, reference and composite-video signals over long distances. They support analogue black-burst, bi-level, tri-level sync signals and NTSC and PAL composite video, over distances up to 10km on singlemode fibre and up to 300m on multimode fibre.The devices are particularly useful for reference sync distribution between remote installations to maintain correct synchronisation.

Optional accessories: For compatible SFP module see LYNX YELLOBRIK FIBRE OPTIC SFP MODULES; for power adapter cables, alternative power supplies and rack-mounting accessories see LYNX YELLOBRIK POWER SUPPLIES AND MOUNTING ACCESSORIES.

OTX 1712 - Analogue Sync/Video Fibre Optic Transmitter

OTX 1712 is a compact analogue sync or NTSC/PAL composite video to fibre optic transmitter. This device is specifically designed to combat the restrictions involved with the distribution of broadcast quality analogue reference and composite video signals over long distances. When paired with the fibre optic receiver ORX 1702 you have a very cost effective optical transmission system for analogue sync reference signals or NTSC/PAL composite video. OTX 1712 device is particularly useful for reference sync distribution between remote installations to maintain correct synchronization. Unlike other very basic analogue to fibre conversion solutions, OTX 1712 incorporates technology to maintain a very high degree of sync and burst phase stability during the conversion and fibre transmission.

The module converts the NTSC/PAL video signal to an SDI signal (including reference and other relevant information) before it is converted to fibre. Therefore when the OTX 1712 is used for NTSC or PAL video sources it is possible to convert the fibre signal directly to SDI if required using an SDI receiver (e.g. ORX 1802). OTX 1712 provides a passive loop output and support for LC, ST or SC singlemode fibre connections. An LC version suitable for multimode fibre is also available. Power: +12V DC at 1.9W nominal. Dimensions (LxWxH): 140 x 42 x 22mm. Weight: 125g.

Included accessories: SFP module, AC power supply

Versions available

OTX 1742 - Analog Sync/Video Fibre Optic Transmitter (CWDM)

OTX 1742 is a compact analogue sync or NTSC/PAL composite video to fibre optic transmitter (CWDM compatible). This device is specifically designed to combat the restrictions involved with the distribution of broadcast quality analogue reference and composite video signals over long distances. When paired with the fibre optic receiver ORX 1702-1 you have a cost-effective optical transmission system for analogue sync reference signals or NTSC/ PAL composite video. This device is particularly useful for reference sync distribution between remote installations to maintain correct synchronization.

Unlike other very basic analogue to fibre conversion solutions, OTX 1742 incorporates technology to maintain a very high degree of sync and burst phase stability during the conversion and fibre transmission. The module converts the NTSC/PAL video signal to an SDI signal (including reference and other relevant information) before it is converted to fibre. Therefore when OTX 1742 is used for NTSC or PAL video sources it is possible to convert the fibre signal directly to SDI if required using an SDI receiver (e.g. ORX 1802). Power: +12V DC at 3.5W nominal. Dimensions (LxWxH): 140 x 42 x 22mm. Weight: 125g.

Included accessories: AC power supply. Note: SFP module not included.

Compatible SPF modules

OH-TX-4-XXXX-LC

ORX 1702 - Analogue Sync/Video Fibre Optic Receiver

ORX 1702 is a compact analogue sync or NTSC/PAL composite video to fibre optic receiver. When paired with the fibre optic transmitter OTX 1712 you have a very cost-effective optical transmission system for analogue sync reference signals or NTSC/PAL composite video. This device is particularly useful for reference sync distribution between remote installations to maintain correct synchronization.

Unlike other very basic analogue to fibre conversion solutions, the ORX 1702 incorporates technology to maintain a very high degree of sync and burst phase stability during the fibre reception and analogue conversion. The module receives an SDI signal (including reference and other relevant information) before it is converted to an analogue signal. Therefore when the ORX 1702 is used for 525/625 SDI video sources it is possible to convert the signal to an analogue NTSC or PAL composite output directly. For example: if the 525 or 625 signal is received from an SDI video transmitter OTX 1812. ORX 1702 provides two analogue outputs and support for LC, ST or SC singlemode fibre connections. An LC version suitable for multimode fibre is also available. Power: +12V DC at 3.5W nominal. Dimensions (LxWxH): 140 x 42 x 22mm. Weight: 125g.

Included accessories: SFP module, AC power supply

Versions available