WOHLER EAMP1-S8-DA AUDIO MONITOR 8-channel, AES3/analogue, 5W per side, 1U

AMP1A PLUS

Wohler AMP1A Plus audio monitor is a self-powered, stereo audio monitoring of two analogue channels (1x stereo channel). AMP1A Plus contains four transducers driven by three power amplifiers. One amplifier/driver combination handles midrange and high frequency information in stereo, while the second handles summed low frequency information below the 500Hz crossover point.

The design provides focused sound for operators in a near field of 1-3ft. The speaker output is 5watts RMS per side, 10watts peak; with RMS bass of 10watts continuous/20watts peak. Peak acoustic output is rated at 98dB SPL at 2ft. Extended high frequency response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds.

A 6.35mm headphone jack with associated volume control is positioned on the front facing panel. When the headphone output is in use, the speakers are muted automatically. All audio I/O connectivity, including loop-through, is by way of 3-pin XLR connectors.

Power consumption: 35W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 44 x 254mm. Weight: 4.6kg.

AMP1-DA/106

AMP1-DA/106 is a self-powered, 2-channel audio monitor analogue and AES/EBU digital sources. 106 segment LEDs add visual monitoring. This audio monitor is suited for use in VTR bays, mobile production vehicles, teleconferencing installations, multimedia systems, satellite link and cable TV facilities, and on-air radio studios.

The design provides focused sound for operators in a near field of 1-3ft. The speaker output is 5watts RMS per side, 10watts peak; with RMS bass of 10watts continuous/20watts peak. Peak acoustic output is rated at 98dB SPL at 2ft. Extended high frequency response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds.

A tri-colour LED design allows a variety of options such as phase correlation, peak hold, and alternate scales. The standard display mode is set as a single segment PPM “dot” above a VU bar; each segment’s colour is fixed according to its position on the scale. Level calibration may be set via dip switches to select one of four different calibration levels.

A 6.35mm headphone jack with associated volume control is positioned on the front facing panel. When the headphone output is in use, the speakers are muted automatically. Other than the headphone output on the front facing panel, all I/O connectivity is on the rear facing panel; including 2x unbalanced BNC AES/EBU digital inputs, 2x balanced 3-pin XLR analogue inputs (1 stereo), and 2x balanced 3-pin XLR analogue output of selected source.

Power consumption: 30W. Power supply: 24V DC, 3.0A. Dimensions (WxHxD): 483 x 44 x 305mm. Weight: 6.4kg.

AMP1-2SDA, AMP1-2SDA+

Both AMP1-2SDA and AMP1-2SDA+ are 1U, rackmountable, 2-channel audio monitors designed for network facility or OB truck for live events. The monitors feature a large front panel screen that displays the selected source and monitored pair; along with brightly displayed levels on 2 x 26 segment LED meters. Additional features include simple tone controls for adjusting audio output and an audio trim control for altering the analogue output levels.

Audio connectivity is available via either 1 x 3G-SDI (with looped output), 1 x AES3 input pair, and either of 2 pairs of Analog inputs (balanced or unbalanced). Analogue and AES3 outputs of the selected pair are included in the unit for external monitoring. In addition, AMP1-2SDA+ has 8 pairs of both analogue and AES3 on 3x DB-25 inputs as standard.

Speaker power output is 5watts RMS per side, 12watts peak, with a peak acoustic output of 90dB SPL at 2ft.

Power consumption: 60W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 107mm. Weight: 2.3kg.

AMP1-8-M, AMP1-16-M

Both of these units offer the same dual input with 3G, HD, and SD-SDI. AMP1-8-M is an 8-channel audio monitor, AMP1-16-M is a 16-channel audio monitor. Both have been designed by Wohler for use in the studio or on the road.

Both units have automatic frame rate detection, which on the AMP1-8-M allows the user to get quick selection and summing of up to eight audio channels and choose between two SDI inputs - toggling selection of channels 1-thru-8 or channels 9-thru-16. AMP1-16-M allows the user to get quick selection and summing of eight audio pairs and choose between two SDI inputs and access 16-channels via 8 pairs.

Other standard features include volume and balance controls, push-button selection of audio channels, SDI looped outputs, and conversion to analogue on XLR. Finally, level meters and phase display on two 2.4-inch LCDs.

The rear panel host I/O connectivity including dual, balanced 3-pin XLR analogue outputs, RJ45 Ethernet connection, SDI 1 I/O on BNC, SDI 2 I/O on BNC, and a fifth BNC connection for selected SDI out. Mains connection is via IEC type input. The front facing panel hosts a USB connection for software updated and storage transfer, and a single 6.35mm headphone jack output with associated volume control. The class D amplifier allows the inbuilt speakers to produce 6watts RMS per side, 12watts peak.

Power consumption: 60W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 44 x 108mm. Weight: 2.3kg.

Designed for use in broadcast studio, OB vans, and studio monitoring, Wohler iAM series of audio monitors include a variety of feature sets for multiple levels of use. iAM series audio monitors contain an onboard web server ensuring multiple units on the same network can be updated, monitored and controlled via a browser-based user interface. The same interface supports configuration with role-based authentication that protects critical configurations from unauthorized alteration.

iAM1-8 - 8-channel, 1U

iAM1-8 is an 8-channel, 3G-SDI and analogue audio monitor with triple 2.4inch touchscreens. The audio monitor also comes with loudness monitoring and phase status as standard. Designed for users who only need 8-channels of monitoring, iAM1-8 is said to be ‘easy to operate’, and provide ‘fast access’ to meters, menus and presets.

Audio loudness metering uses ITU-R BS.1770 or EBU R128 standards. Connectivity includes 2x 3G-SDI inputs via BNC connectors, 1x 3G-SDI output (of selected source) via BNC connector. An additional 8-channels of analogue I/O is obtainable via optional cards.

Optional upgrades: OPT-AES, OPT-MADI, OPT-DOLBY, OPT-OUTPUT ROUTING, OPT-DANTE (829171 or 829171-1), OPT-RAVENNA 64, OPT-ANLG/TOS, OPT-SFP CARD, SFP-2110 W/Ember+, SFP-2110 W/NMOS, SFP-2022-6, SFP-2110 W/Ember+ + 2022-6, SFP-2110 W/NMOS+2022-6, SFP-SDI, SFP-SDI-Fiber, SFP-MADI-MM-Fiber, SFP-MADI-SM-Fiber.

Power consumption: 65W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 2.5kg.

iAM2-8 - 8-channel, 2U

Wohler iAM2-8 shares much of the functionality of iAM1-8, however it is housed in a 2U rackmountable chassis. iAM2-8 has one fewer touchscreen than the three of the iAM1-8, however they are larger in form, measuring 4.3inches each. The speaker output power is 15watts RMS per side, 30watts peak, with a peak acoustic output of 104dB SPL at 2ft.

Optional upgrades: OPT-AES, OPT-MADI, OPT-DOLBY, OPT-OUTPUT ROUTING, OPT-DANTE (829171 or 829171-1), OPT-RAVENNA 64, OPT-ANLG/TOS, OPT-SFP CARD, SFP-2110 W/Ember+, SFP-2110 W/NMOS, SFP-2022-6, SFP-2110 W/Ember+ + 2022-6, SFP-2110 W/NMOS+2022-6, SFP-SDI, SFP-SDI-Fiber, SFP-MADI-MM-Fiber, SFP-MADI-SM-Fiber.

Power consumption: 60W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 89 x 140mm. Weight: 3.6kg.

iAM1-12G - 16-channel, 1U

Wohler iAM1-12G is a 16-channel, 12G-SDI audio-only monitor that is IP ready. As standard iAM1-12G has 12G-SDI and analogue inputs, loudness monitoring and phase status. Featuring 3x 2.4inch touchscreen LCD panels, iAM1-12G is designed to be easily operated, providing fast access to meters, menus and presets. The speaker output is 5watts RMS per side, 12watts peak, with a peak acoustic output of 90dB SPL at 2ft.

The user is able to license additional signal formats and processing options, including Dolby, AoIP, Toslink and 8-channel Analogue, as and when needed – ensuring the product is future proof. Options for additional signals, including AES3, MADI64, DanteTM, RavennaTM, SMPTE-2110 and SMPTE-2022-7.

Optional upgrades: OPT-AES, OPT-MADI, OPT-DOLBY, OPT-OUTPUT ROUTING, OPT-DANTE (829171 or 829171-1), OPT-RAVENNA 64, OPT-ANLG/TOS, OPT-SFP CARD, SFP-2110 W/Ember+, SFP-2110 W/NMOS, SFP-2022-6.

Power consumption: 65W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 2.5kg.

iAM-SUM8, iAM-SUM16, iAM-SUM32

A sub-series of ‘easy to use’, IP-ready audio monitors/mixers with options of 8, 16 or 32-channel configurations. All versions have a single 7-inch touchscreen with a viewing angle of 160 x 160degrees, and feature access control to lockout unauthorised setting adjustment. The audio monitors can be configured to operate in either single channel or pair mode and offer 3G-SDI connectivity and a pair of analogue inputs and outputs as standard. Speaker output is 5watts RMS per side, 12watts peak.

Connectivity includes 2x 3G-SDI input on BNC connectors, 1x 3G-SDI output on BNC connector, and 1x pair analogue audio input/outputs on 3-pin XLR connectors. Audio loudness can be measures using ITU-R BS.1770 or EBU R128 standards.

Designed for use at home in quality control, outside broadcast, and live-to-air production environments, iAM-SUM provides ‘intuitive audio monitoring’ with access to signals or to user-definable presets of any individual signal source or a mix of sources for monitoring and mixing.

Optional upgrades: OPT-AES, OPT-MADI, OPT-OUTPUT ROUTING, OPT-DANTE (829171 or 829171-1), OPT-RAVENNA 64, OPT-ANLG/TOS, OPT-SFP CASD, SFP-2110 W/Ember+, SFP-2110 W/NMOS, SFP-2022-6, SFP-2110 W/Ember+, SFP-2110 W/NMOS+ 2022-6, SFP-SDI, SFP-SDI-Fiber, SFP-MADI-MM-FIBER, SFP-MADI-SM-FIBER.

Power consumption: 65W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 2.5kg.

HRS-1S

Wohler HRS-1S is a 2-channel, self-powered audio monitor with two analogue input channels on 3-pin XLR, and a stereo loop-through. The unit contains two transducers that driven by two power amplifiers: one amplifier/driver combination handles midrange and high frequency information, while the second handles summed low frequency information below the 500Hz crossover point. This results in a speaker output of 5watts RMS per side, 10watts peak; 10watts RMS continuous bass, and 20watts peak.

The half-1U rack design allows this unit to fit into smaller spaces whilst providing focused sound for operators in an ultra near field (1 to 3 ft.) working environment, with a peak acoustic output of 95dB SPL at 2ft.

Extended high frequency response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds. A 6.35mm headphone jack is provided on the front panel, and usage automatically mutes the speakers. Output limiter circuits are incorporated to protect the speakers, and magnetic shielding allows placement immediately adjacent to video monitors with no colour distortion.

Included accessories: RE-1 rackmount kit
Optional accessories: RE-2 centre rackmount kit, RE-3 side-by-side rackmount kit

Power consumption: 35W Typical. Power requirements: 24V DC, 3.0 A, with external power supply connecting to
100-240VAC, 50/60Hz mains power. Dimensions (WxHxD): 216 x 44 x 190mm. Weight: 3.2kg.