Wohler eAMP series offers ‘fast and intuitive’ confidence monitoring of AES3 and analogue audio sources. Whether in the studio or on the road, eAMP units provide simultaneous selection and summing of the selected source. They also feature adjustable volume and balance controls, clear display of levels, and phase indications.
eAMP monitors have been designed to be easier to operate than the now-obsolete Wohler S8. They include a wide 7-inch LCD touchscreen display providing fast access to input sources, meters and menus, all augmented by hardware controls. Software upgrades include loudness, presets, web meters/monitoring/configuration and customized output routing. Dolby D, DD+ and E decoding are also optional add-ons.
Being the replacement models for AMP1-8-M, AMP1-16-M many of the features are the same, including dual input with 3G, HD, and SD-SDI. One of the main upgrades is the 7-inch LCD touchscreen which for better monitoring, menu navigation and selection, and adjustment. Another upgrade is the lower power consumption which is 19W as opposed to 60W. eAMP1-8-M is an 8-channel audio monitor, eAMP1-16-M is a 16-channel audio monitor. Both have been designed by Wohler for use in the studio or on the road.
Both units have automatic frame rate detection, which on the eAMP1-8-M allows the user to get quick selection and summing of up to eight audio channels and choose between two SDI inputs - toggling selection of channels 1-thru-8 or channels 9-thru-16. eAMP1-16-M allows the user to get quick selection and summing of eight audio pairs and choose between two SDI inputs and access 16-channels via 8 pairs.
Other standard features include volume and balance controls, push-button selection of audio channels, SDI looped outputs, and conversion to analogue on XLR. Finally, level meters and phase display on two 2.4-inch LCDs.
The rear panel hosts I/O connectivity including dual, balanced 3-pin XLR analogue outputs, RJ45 Ethernet connection for unit management, SDI 1 I/O on BNC, SDI 2 I/O on BNC, and a fifth BNC connection for selected SDI out. Mains connection is via IEC type input. The front facing panel hosts a USB connection for software updated and storage transfer, and a single 6.35mm headphone jack output with associated volume control. The class D amplifier allows the inbuilt speakers to produce 5watts RMS per side, 12watts peak.
Power consumption: 19W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 1.5kg.
eAMP1-S8-DA - 8-channel, AES3/Analogue
Wohler eAMP1-S8-DA is an 8-channel, baseband only, audio monitor for AES3 and analogue signals. Connectivity includes dual RCA (phono) analogue input, balanced 8-channel analogue inputs/outputs via D-sub connection, analogue output via dual, balanced 3-pin XLR, and 8-channel AES I/O on 15-pin d-sub connector. Mains input is by way of IEC connector and system management connection is via RJ45. The 7-inch touchscreen display has a viewing angle of 160x160 degrees (HxV), and the speaker output is 5watts RMS per side, 12watts peak; with a peak acoustic output of 90dB SPL at 2ft.
Optional upgrades: OPT-e Package, OPT-DOLBY (829174).
Power consumption: 19W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 1.5kg.
eAMP1-S8-MDA - 8-channel, AES3/Analogue/3G-SDI
An 8-channel, baseband only, dual 3G-SDI input, audio monitor for AES3 and analogue audio signals. Connectivity includes dual 3G-SDI input on BNC connector, dual RCA (phono) analogue input, balanced 8-channel analogue inputs/outputs via D-sub connection, analogue output via dual, balanced 3-pin XLR, and 8-channel AES I/O on 15-pin d-sub connector. Mains input is by way of IEC connector and system management connection is via RJ45. The 7-inch touchscreen display has a viewing angle of 160x160 degrees (HxV), and the speaker output is 5watts RMS per side, 12watts peak; with a peak acoustic output of 90dB SPL at 2ft.
Optional upgrades: OPT-e Package, OPT-DOLBY (829174).
Power consumption: 19W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 1.5kg.
eAMP1-S8-2MDA - 8-channel, AES3/Analogue/Dual 3G-SDI
eAMP1-S8-2MDA is an 8-channel, baseband only audio monitor with dual 3G-SDI inputs, AES3 and analogue I/O, and a 7-inch wide touchscreen. Connectivity includes SDI-1 on dual 3G-SDI I/O on BNC connectors, SDI-2 on dual 3G-SDI I/O on BNC connectors, single BNC connector for selected SDI output, dual RCA (phono) analogue input, balanced 8-channel analogue inputs/outputs via D-sub connection, analogue output via dual, balanced 3-pin XLR, and 8-channel AES I/O on 15-pin d-sub connector. Mains input is by way of IEC connector and system management connection is via RJ45. The 7-inch touchscreen display has a viewing angle of 160x160 degrees (HxV), and the speaker output is 5watts RMS per side, 12watts peak; with a peak acoustic output of 90dB SPL at 2ft.
Optional upgrades: OPT-e Package, OPT-DOLBY (829174).
Power consumption: 19W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 1.5kg.
eAMP1-S16-MDA - 16-channel, AES3/Analogue/3G-SDI
Wohler eAMP1-S16-MDA has the same feature set, functionality, and I/O connectivity options as eAMP1-S8-MDA, however it has 16-channel monitoring.
Optional upgrades: OPT-e Package, OPT-DOLBY (829174).
Power consumption: 19W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 1.5kg.
eAMP1-S16-2MDA - 16-channel, AES3/Analogue/Dual 3G-SDI
eAMP1-S16-2MDA has the same feature set, functionality, and I/O connectivity options as eAMP1-S8-2MDA, however it has 16-channel monitoring.
Optional upgrades: OPT-e Package, OPT-DOLBY (829174).
Power consumption: 65W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 140mm. Weight: 2.5kg.