Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

22 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

RDL ST-MX2 MIXER 2-channel, mic/line level I/O

Artikelnummer
58-157
Hersteller
RDL (Radio Design Labs)
Typennummer
  • ST-MX2
RDL ST-MX2 MIXER 2-channel, mic/line level I/O
RDL ST-MX2 MIXER 2-channel, mic/line level I/O

Bestellangaben

MwSt. / Versand
261,80 
pro Stück (zzgl. MwSt.)
1 lieferbar Mehr benötigt?

RDL AV INTERFACES - STICK-ON Series

RDL Stick-on series is a range of small enclosed “black boxes” with screw terminals on one side, and a self-adhesive strip on the base. This range, already popular in America offers a simple, high quality solution to temporary or permanent interfacing, communication and distribution problems especially in theatre, PA and broadcast.

All ST modules measure 74 x 38 x 15mm.

LINE AMPLIFIERS

DISTRIBUTION AMPLIFIERS

AMPLIFIERS

HEADPHONE AMPLIFIERS

PREAMPLIFIERS

CONTROLLED RELAYS

MIXERS


ST-MX2 Universal Audio Mixer

A two input mic/line mixer, with mic and line level outputs. Each input is jumper selectable for mic or line level with adjustable gain (mic: -45 to -65dBu, line: -18dBV to +10dBu) . Impedance: mic input 200 ohm balanced or unbalanced, line input 20k ohm bridging balanced or unbalanced, output 150 ohm mic and line; frequency response: mic 25Hz-50kHz (+ or - 1dB), line 10Hz-30kHz (+ or - 0.25dB); headroom mic: >22dB, line: >18dBu; THD mic: <0.05%, line: <0.005%. Supply: single 60mA.


ST-MX3 Line Level Mixer

A three input balanced line mixer with separate gain controls (–14/+24dBV). Outputs can be paralleled with other modules for larger mixers. Impedance: input >30k bridging, output 400R balanced; frequency response: 10Hz–20kHz ±0.5dB; dynamic range: 102dB; THD: <0.03%; CMRR >50dB. Supply: dual 55mA.


ST-UMX3 Mic and Line Mixer

A three input switchable mic/line level output mixer with inputs switchable between mic and line level, balanced or unbalanced. Individually adjustable input levels. Impedance: mic input 600R balanced, line input 50k balanced, output: 150R balanced, 75R unbalanced; frequency response: mic ±1dB 50Hz–100kHz, line: ±0.05dB 10Hz–100kHz, gain: mic: Off to 60dB, line: Off to 21dBdB; headroom: 18dB; THD: <0.006%. Supply: Single 55mA.

DIVIDER/COMBINERS

AUDIO OSCILLATORS

CROSSOVERS

AUDIO SWITCHER

SIGNAL PROCESSORS

NOISE/RAMP GENERATORS

TELEPHONE COUPLERS

PAGING MODULES

POWER DISTRIBUTION

Mounting Accessories

ST series modules are supplied with a self-adhesive foam pad which can be used to attach the module to a clean flat surface. A range of accessories are available for mounting modules. In addition the modules may be fitted in conjunction with RDL Flat-Pak and RDL Rack-Up modules in certain of the housings designed for these. STS-RF1 mounting enclosure is a shielded chassis with detachable terminal block for mounting a single Stick-On module onto a flat surface.

Powering

Apart from passive modules, all Stick-ons require either a single 24-33V DC rail or a dual-rail 12-0-12 to 16-0-16V DC supply. In extreme circumstances it may be possible to operate units requiring dual rail supplies from a single floating DC supply, in which circumstances the +ve rail should be connected to the +ve power terminal and the 0V or ground rail should be connected to the –ve terminal of the power input with no external connection to the 0V power terminal. Modules connected in such a way must not have either input or output connected to ground, and we would not recommend such usage unless the client feels competent to make educated decisions about this configuration.