Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

22 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

RDL ST-CX2 CROSSOVER Active, line level, 2-band

Artikelnummer
58-425
Hersteller
RDL (Radio Design Labs)
Typennummer
  • ST-CX2
RDL ST-CX2 CROSSOVER Active, line level, 2-band
RDL ST-CX2 CROSSOVER Active, line level, 2-band

Bestellangaben

MwSt. / Versand
234,31 
pro Stück (zzgl. MwSt.)
Dieses Produkt wird speziell für Ihre Bestellung eingekauft. Bei Stornierung können Gebühren entstehen, lieferbar in 2‑3 Wochen. Brauchen Sie diesen Artikel schneller? Rufen Sie uns an

RDL AV INTERFACES - STICK-ON Series

RDL Stick-on series is a range of small enclosed “black boxes” with screw terminals on one side, and a self-adhesive strip on the base. This range, already popular in America offers a simple, high quality solution to temporary or permanent interfacing, communication and distribution problems especially in theatre, PA and broadcast.

All ST modules measure 74 x 38 x 15mm.

LINE AMPLIFIERS

DISTRIBUTION AMPLIFIERS

AMPLIFIERS

HEADPHONE AMPLIFIERS

PREAMPLIFIERS

CONTROLLED RELAYS

MIXERS

DIVIDER/COMBINERS

AUDIO OSCILLATORS

CROSSOVERS


ST-CX2 Line Level Crossover

A line level equaliser/crossover designed to act as a high pass channel for full range speakers to be used with ‘woofer’ speakers (below 100Hz). The equaliser has a 100Hz-30kHz pass band with 18dB/octave low frequency roll-off and a mid-band equaliser giving up to 8dB attenuation centred at 2kHz on the full range output, and a 40Hz-165Hz pass band with a low frequency equalisation of up to 10dB at 50Hz on the woofer output. Input line level: +4dB nominal, balanced or unbalanced; headroom: >18dB; THD: <0.075% (full); <0.025% (woofer). Noise <80dB. Supply: single 40mA.


ST-CX2S Sub-woofer Crossover

A line level equaliser designed to act as a sub-bass frequency channel for subwoofer speakers. The equaliser has dual bridging inputs and 22Hz-80Hz pass band and an adjustable equaliser centred at 32Hz for boosts from flat to +5.5dB. This unit is ideal where a single additional sub-woofer is to be added to stereo speaker systems, or for use with other ST-CX2 products. The CX2S is supplied factory set to match the JBL model 4645B THX approved sub-woofer. Input line level: +4dB nominal, balanced or unbalanced, bridging; headroom: >18dB; THD: <0.05%. Noise <90dB. Supply: single 30mA.

AUDIO SWITCHER

SIGNAL PROCESSORS

NOISE/RAMP GENERATORS

TELEPHONE COUPLERS

PAGING MODULES

POWER DISTRIBUTION

Mounting Accessories

ST series modules are supplied with a self-adhesive foam pad which can be used to attach the module to a clean flat surface. A range of accessories are available for mounting modules. In addition the modules may be fitted in conjunction with RDL Flat-Pak and RDL Rack-Up modules in certain of the housings designed for these. STS-RF1 mounting enclosure is a shielded chassis with detachable terminal block for mounting a single Stick-On module onto a flat surface.

Powering

Apart from passive modules, all Stick-ons require either a single 24-33V DC rail or a dual-rail 12-0-12 to 16-0-16V DC supply. In extreme circumstances it may be possible to operate units requiring dual rail supplies from a single floating DC supply, in which circumstances the +ve rail should be connected to the +ve power terminal and the 0V or ground rail should be connected to the –ve terminal of the power input with no external connection to the 0V power terminal. Modules connected in such a way must not have either input or output connected to ground, and we would not recommend such usage unless the client feels competent to make educated decisions about this configuration.