Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

15 Februar 2025
  • LIEFERUNG AM NĂ„CHSTEN TAG
    MĂ–GLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MĂ–GLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

RYCOTE 042901 INVISION VIDEO MICROPHONE SUSPENSION Hotshoe fitting, for 19-25mm mic

Artikelnummer
74-9391
Hersteller
Rycote
Typennummer
  • 042901
  • InVision Video
  • 042901
RYCOTE 042901 INVISION VIDEO MICROPHONE SUSPENSION Hotshoe fitting, for 19-25mm mic
RYCOTE 042901 INVISION VIDEO MICROPHONE SUSPENSION Hotshoe fitting, for 19-25mm mic

RYCOTE SUSPENSIONS AND LYRES

A series of Rycote suspensions designed to offer protection against noise incurred by movement whilst on stand, handheld, or on boom pole. These suspensions are popular amongst TV and film sound engineers.

Modular Suspensions

InVision Broadcast Suspensions

InVision Broadcast Compatibility Chart

InVision Video Suspensions

These members of the InVision range are shock-mount and suspension systems for fitting microphones between 9.5 and 25mm in diameter and up to 300mm in length, depending on model, to camcorders and digital SLR cameras. Most are fitted to the camera hot-shoe; others screw into a standard quarter-inch thread, available on some camcorders, or by means of separately available adapters.

In each case the microphone is suspended in two of Rycote's W-shaped patented Lyre mounts, which provide 'substantially better isolation from camera motor and drive noise and vibrations than traditional on-camera microphone mounts'. Since there are no elasticated parts, the mounts never sag or need re-threading.


042901 - Hot Shoe

A 'universal' plastic clip is supported by two Lyres which are in turn supported by a 'modular' bar. The modular bar includes a moulded cable clip, and is connected to one end of a transverse bar by a bolt with thumbscrew. The modular bar can swivel on the transverse bar and be moved along it's length and then fixed in position using the thumbscrew. At the other end of the transverse bar a hot-shoe adapter is fitted using a thumb-screw about which it can swivel a full 360 degrees in the horizontal plane. As a result the microphone can be positioned as desired in the horizontal plane, but remains fixed in the vertical plane.

The universal clip is suited to microphones 19 - 25mm in diameter and up to 300 mm in length.


042902 - 1/4 inch Adapter

Substantially the same as the 042901, this model does not have a hot shoe mount, it is substituted by a standard quarter-inch threaded screw which fits to a female thread and is locked using a thumbscrew. It is otherwise the same.

InVision USM Studio Suspensions

InVision USM Studio Compatibility Chart

InVision USM Studio Kits

Nano Shield Lyre Compatibility Chart