Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

3 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

WOHLER AMP1-2SDA AUDIO MONITOR 2-channel, AES3/3G-SDI/analogue, 5W RMS per side, 1U

Artikelnummer
76-831
Hersteller
Wohler
Typennummer
  • AMP1-2SDA
  • 8103-0200
WOHLER AMP1-2SDA AUDIO MONITOR 2-channel, AES3/3G-SDI/analogue, 5W RMS per side, 1U
WOHLER AMP1-2SDA AUDIO MONITOR 2-channel, AES3/3G-SDI/analogue, 5W RMS per side, 1UWOHLER AMP1-2SDA AUDIO MONITOR 2-channel, AES3/3G-SDI/analogue, 5W RMS per side, 1UWOHLER AMP1-2SDA AUDIO MONITOR 2-channel, AES3/3G-SDI/analogue, 5W RMS per side, 1UWOHLER AMP1-2SDA AUDIO MONITOR 2-channel, AES3/3G-SDI/analogue, 5W RMS per side, 1U

WOHLER AUDIO MONITORS

A series of Wohler audio monitors for use in studio, OB van, broadcast studio, and live-to-air productions. These products include a variety of input/output configuration, and some have expansion options including digital audio, Dante, Ravenna, and analogue audio. For more information on optional upgrade options see WOHLER UPGRADE OPTIONS.

AMP Series


AMP1A PLUS

Wohler AMP1A Plus audio monitor is a self-powered, stereo audio monitoring of two analogue channels (1x stereo channel). AMP1A Plus contains four transducers driven by three power amplifiers. One amplifier/driver combination handles midrange and high frequency information in stereo, while the second handles summed low frequency information below the 500Hz crossover point.

The design provides focused sound for operators in a near field of 1-3ft. The speaker output is 5watts RMS per side, 10watts peak; with RMS bass of 10watts continuous/20watts peak. Peak acoustic output is rated at 98dB SPL at 2ft. Extended high frequency response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds.

A 6.35mm headphone jack with associated volume control is positioned on the front facing panel. When the headphone output is in use, the speakers are muted automatically. All audio I/O connectivity, including loop-through, is by way of 3-pin XLR connectors.

Power consumption: 35W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 44 x 254mm. Weight: 4.6kg.


AMP1-DA/106

abgekündigt

AMP1-DA/106 is a self-powered, 2-channel audio monitor analogue and AES/EBU digital sources. 106 segment LEDs add visual monitoring. This audio monitor is suited for use in VTR bays, mobile production vehicles, teleconferencing installations, multimedia systems, satellite link and cable TV facilities, and on-air radio studios.

The design provides focused sound for operators in a near field of 1-3ft. The speaker output is 5watts RMS per side, 10watts peak; with RMS bass of 10watts continuous/20watts peak. Peak acoustic output is rated at 98dB SPL at 2ft. Extended high frequency response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds.

A tri-colour LED design allows a variety of options such as phase correlation, peak hold, and alternate scales. The standard display mode is set as a single segment PPM “dot” above a VU bar; each segment’s colour is fixed according to its position on the scale. Level calibration may be set via dip switches to select one of four different calibration levels.

A 6.35mm headphone jack with associated volume control is positioned on the front facing panel. When the headphone output is in use, the speakers are muted automatically. Other than the headphone output on the front facing panel, all I/O connectivity is on the rear facing panel; including 2x unbalanced BNC AES/EBU digital inputs, 2x balanced 3-pin XLR analogue inputs (1 stereo), and 2x balanced 3-pin XLR analogue output of selected source.

Power consumption: 30W. Power supply: 24V DC, 3.0A. Dimensions (WxHxD): 483 x 44 x 305mm. Weight: 6.4kg.


AMP1-2SDA, AMP1-2SDA+

Both AMP1-2SDA and AMP1-2SDA+ are 1U, rackmountable, 2-channel audio monitors designed for network facility or OB truck for live events. The monitors feature a large front panel screen that displays the selected source and monitored pair; along with brightly displayed levels on 2 x 26 segment LED meters. Additional features include simple tone controls for adjusting audio output and an audio trim control for altering the analogue output levels.

Audio connectivity is available via either 1 x 3G-SDI (with looped output), 1 x AES3 input pair, and either of 2 pairs of Analog inputs (balanced or unbalanced). Analogue and AES3 outputs of the selected pair are included in the unit for external monitoring. In addition, AMP1-2SDA+ has 8 pairs of both analogue and AES3 on 3x DB-25 inputs as standard.

Speaker power output is 5watts RMS per side, 12watts peak, with a peak acoustic output of 90dB SPL at 2ft.

Power consumption: 60W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 45 x 107mm. Weight: 2.3kg.


AMP1-8-M, AMP1-16-M

abgekündigt

Both of these units offer the same dual input with 3G, HD, and SD-SDI. AMP1-8-M is an 8-channel audio monitor, AMP1-16-M is a 16-channel audio monitor. Both have been designed by Wohler for use in the studio or on the road.

Both units have automatic frame rate detection, which on the AMP1-8-M allows the user to get quick selection and summing of up to eight audio channels and choose between two SDI inputs - toggling selection of channels 1-thru-8 or channels 9-thru-16. AMP1-16-M allows the user to get quick selection and summing of eight audio pairs and choose between two SDI inputs and access 16-channels via 8 pairs.

Other standard features include volume and balance controls, push-button selection of audio channels, SDI looped outputs, and conversion to analogue on XLR. Finally, level meters and phase display on two 2.4-inch LCDs.

The rear panel host I/O connectivity including dual, balanced 3-pin XLR analogue outputs, RJ45 Ethernet connection, SDI 1 I/O on BNC, SDI 2 I/O on BNC, and a fifth BNC connection for selected SDI out. Mains connection is via IEC type input. The front facing panel hosts a USB connection for software updated and storage transfer, and a single 6.35mm headphone jack output with associated volume control. The class D amplifier allows the inbuilt speakers to produce 6watts RMS per side, 12watts peak.

Power consumption: 60W. Power requirements: 100-240 VAC ±10%, 50/60Hz. Dimensions (WxHxD): 483 x 44 x 108mm. Weight: 2.3kg.

eAMP Series

iAM Series

HRS Series