Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

14 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

GLENSOUND DARK16O AUDIO INTERFACE Dante/AES67 to analogue, 16 outputs

Artikelnummer
95-8968
Hersteller
Glensound
Typennummer
  • DARK16O
GLENSOUND DARK16O AUDIO INTERFACE Dante/AES67 to analogue, 16 outputs
GLENSOUND DARK16O AUDIO INTERFACE Dante/AES67 to analogue, 16 outputsGLENSOUND DARK16O AUDIO INTERFACE Dante/AES67 to analogue, 16 outputsGLENSOUND DARK16O AUDIO INTERFACE Dante/AES67 to analogue, 16 outputs

GLENSOUND AUDIO INTERFACES - Dante/Ravenna

A range of analogue/AES3 to Dante/AES67 and Dante/AES67 to analogue/AES3 interfaces from Glensound. These interfaces are designed to be used in broadcast audio and recording studios whereby a reliable and high quality end product is required. The AES3 interfaces have been designed for use in outside broadcast, theatre, and location applications, where interfacing between AES3 and Dante/AES67 is required.

GTM - Dante to headphone/headset

AoIP22u - 2x RCA (phono) I/O to Dante

AoIP22 - 2x Analogue I/O to Dante

AoIP22 AES3 - 1x AES3 I/O to Dante

AoIP2M - 2x Microphone to Dante

AoIP44 AES3 - 2x AES3 I/O to Dante

SIGNATURE AOIP44 - 4x Analogue I/O to Dante

DARK DAWN 1616M - 16x Analogue I/O, Dante/AES67

DARK8O - 8x Analogue outputs to Dante

DARK8ADI - 8x Analogue/4x AES3 input to Dante

DARK88 MKII - 8x8 Line-level to Dante

DARK16I - 16x analogue input to Dante

DARK16O - 16x analogue outputs to Dante

DARK16O is a 19-inch, 1U sub-rack that provides sixteen high quality analogue audio outputs from a Dante/AES67 AoIP network. These audio outputs are balanced line level signals and for ease of installation are presented on the rear panel XLRs.

On the front panel of the DARK16O there are four red LEDs and four green LEDs that illuminate depending on the status of the link. Red indicates no connection, green indicates a successful connection. For example, if you have connected the DARK16I to two separate PSUs only one of which works then you will have a red ‘fault’ LED illuminate to warn you that there is no power detected on the connection that is not receiving mains power.

There is one 8-way female D-type connector which is an alarm status connection that will report the failure of a link status if one is detected whilst in operation. The mini-USB connection allows the firmware of the DARK16O to be updated along with the blue identify button and reset button. A mini-B USB socket allows connection to a PC for performing firmware updates, in conjunction with 'Identify' and 'update' buttons. Two SFP slots are provided to take optional primary and secondary SFP fibre interfaces for the network connection. Two Ethernet sockets provide primary and secondary copper Ethernet connections.

The rear panel of the DARK16O has sixteen audio outputs from the network. Each output is on its own Neutrik 3-pin XLR pin plug. There are two IEC mains sockets, primary and secondary. Both are a standard IEC mains socket that accepts external AC voltage of 100 – 240 VAC +/- 10%. There is a non-accessible internal fuse for this input. DARK16O is designed to operate with either primary or secondary mains sources or both for power redundancy.

Analogue audio frequency response: 20Hz to 22kHz, +/-0.25dB. Maximum output level: +18dBu,+24 option to order. Full scale: 0dBFs = +18dBu, +24dBu option to order. Distortion: 0.0013%, at 100Hz; 0.0022%, at 1kHz; 0.00094% at 10kHz, reference to +8dBu output. Noise: -93dB, at line up, A weighted RMS. Inter-channel cross talk: greater than 101dB, at line up with 1kHz tone. Output type: Electronically balanced, can be wired unbalanced. Network interface: 2x Neutrik RJ45 Ethercon sockets and 2x GBIC SFP module slots. Protocol: Dante and AES67. Audio sample rates: 32 to 192 kS/s. Power connections: 2x mains inputs filtered IEC, 100 to 240 VAC 47-63Hz. AC consumption: 18Watts at 230VAC. Internal mains fuse: 20mm 1A anti surge. Dimensions: 1U x 300mm, excluding connectors. Weight: 2.8kg

Included items: Handbook, 1x 2m CAT5 RJ45 plug/plug cable, and 1x 2m IEC socket cable (UK and EU only).

DARK1616 - 16x16 line-level and AES to Dante

DARK1616D - 8x8 AES to Dante

DARK1616M - 16x16 mic/line-level and AES to Dante

Optional SFP Modules

Dante/SFPS is a single-mode module and Dante/SFPM is multi-mode. Dante/SFP1 and Dante/SFP2 are for use over distances up to 10km and are WDM (wavelength-division multiplexing) types, a multiplexing technology which can be used to enable bi-directional communication over a single fibre. Dante/SFP1 should be used in a pair with SFP2 Dante breakout boxes: See Dante interfaces.