Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

20 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

GLENSOUND AOIP44 AUDIO INTERFACE Dante, balanced line-level audio, 4x4 in/out

Artikelnummer
95-8975
Hersteller
Glensound
Typennummer
  • AOIP44
  • Signature AoIP44
GLENSOUND AOIP44 AUDIO INTERFACE Dante, balanced line-level audio, 4x4 in/out
GLENSOUND AOIP44 AUDIO INTERFACE Dante, balanced line-level audio, 4x4 in/outGLENSOUND AOIP44 AUDIO INTERFACE Dante, balanced line-level audio, 4x4 in/outGLENSOUND AOIP44 AUDIO INTERFACE Dante, balanced line-level audio, 4x4 in/out

GLENSOUND AUDIO INTERFACES - Dante/Ravenna

A range of analogue/AES3 to Dante/AES67 and Dante/AES67 to analogue/AES3 interfaces from Glensound. These interfaces are designed to be used in broadcast audio and recording studios whereby a reliable and high quality end product is required. The AES3 interfaces have been designed for use in outside broadcast, theatre, and location applications, where interfacing between AES3 and Dante/AES67 is required.

GTM - Dante to headphone/headset

AoIP22u - 2x RCA (phono) I/O to Dante

AoIP22 - 2x Analogue I/O to Dante

AoIP22 AES3 - 1x AES3 I/O to Dante

AoIP2M - 2x Microphone to Dante

AoIP44 AES3 - 2x AES3 I/O to Dante

SIGNATURE AOIP44 - 4x Analogue I/O to Dante

Glensound AoIP44 is a dedicated, rack-mounting, DANTE Ethernet interface, designed for use in demanding broadcast environments. It has four balanced inputs and outputs and can be used as a stand-alone interface into a DANTE network, or in conjunction with a second, directly linked, Glensound interface as an audio 'snake', or for use as the network-connected or point-to-point interface to Glensound’s DANTE commentator units.

Glensound's Signature Series have internal power supplies as standard, in addition every unit, other than the PS1 power supply, has an external 12V DC input which may be used used as a primary power source, or for backup when connected to an optional Signature PS1 power station. The Signature case is in rack-mounting format, 1U high, and has extruded sides to which rack 'ears' are attached. These may be removed and fixed to the rear of the unit if desired. The extrusion has 'wings' at the side which may be used to mount the case to a flat surface.

DANTE is a software and hardware solution, offering high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with low latency and accurate synchronization. In a DANTE network, the DANTE Controller web interface controls audio routing. Any DANTE input can be routed to any other output on the network, or to multiple network output points. The AoIP is compatible with Glensound DARK series or AoIP44 DANTE interfaces when directly connected as a 'snake'.

The front panel has two LEDs, one to indicate power is present from the internal AC power supply, and the other to indicate the network is present.

The rear panel has four male and four female 3-pin XLR connectors for balanced, line level, audio connections. A locking EtherCON RJ45 connector provides a connection to the audio network. An IEC inlet connects the AC power, while a 4-pin male XLR is provided an external 12V DC power supply which can be used as a primary or backup power source.

Analogue audio: +18dBu / +18dBu, maximum, input / output, 20k ohms / 50 ohms impedance. Inputs and outputs are electronically balanced and can be wired unbalanced. Response: 'Flat until 22k'Hz, +/- 0.25dB.Distortion: 0.00134% THD at 1kHz, referred to +8dBu output. Noise: -94.6dB, residual. Dynamic range: 112.6dB. DANTE network sample rate: 44.1, 48, 88.2, 96kHz. Power source: 100 - 240V AC, 47-63Hz; 4.3W or 12V DC, 240mA. Dimensions: Rack mounting, 1U x 123mm deep. Weight: 1.2kg.

Included accessories: Power cable, with UK 13A connector.
Optional accessories: Signature PS1 power supply

DARK DAWN 1616M - 16x Analogue I/O, Dante/AES67

DARK8O - 8x Analogue outputs to Dante

DARK8ADI - 8x Analogue/4x AES3 input to Dante

DARK88 MKII - 8x8 Line-level to Dante

DARK16I - 16x analogue input to Dante

DARK16O - 16x analogue outputs to Dante

DARK1616 - 16x16 line-level and AES to Dante

DARK1616D - 8x8 AES to Dante

DARK1616M - 16x16 mic/line-level and AES to Dante

Optional SFP Modules

Dante/SFPS is a single-mode module and Dante/SFPM is multi-mode. Dante/SFP1 and Dante/SFP2 are for use over distances up to 10km and are WDM (wavelength-division multiplexing) types, a multiplexing technology which can be used to enable bi-directional communication over a single fibre. Dante/SFP1 should be used in a pair with SFP2 Dante breakout boxes: See Dante interfaces.