Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

14 Februar 2025
  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

GLENSOUND DANTE/SFPS SFP MODULE For single-mode fibre

Artikelnummer
95-8986
Hersteller
Glensound
Typennummer
  • DANTE/SFPS
Kein Bild

Bestellangaben

MwSt. / Versand
184,45 
pro Stück (zzgl. MwSt.)
Dieses Produkt wird speziell für Ihre Bestellung eingekauft. Bei Stornierung können Gebühren entstehen, lieferbar in 2‑3 Wochen. Brauchen Sie diesen Artikel schneller? Rufen Sie uns an

GLENSOUND AUDIO INTERFACES - Dante/Ravenna

A range of analogue/AES3 to Dante/AES67 and Dante/AES67 to analogue/AES3 interfaces from Glensound. These interfaces are designed to be used in broadcast audio and recording studios whereby a reliable and high quality end product is required. The AES3 interfaces have been designed for use in outside broadcast, theatre, and location applications, where interfacing between AES3 and Dante/AES67 is required.

GTM - Dante to headphone/headset

AoIP22u - 2x RCA (phono) I/O to Dante

AoIP22 - 2x Analogue I/O to Dante

AoIP22 AES3 - 1x AES3 I/O to Dante

AoIP2M - 2x Microphone to Dante

AoIP44 AES3 - 2x AES3 I/O to Dante

SIGNATURE AOIP44 - 4x Analogue I/O to Dante

DARK DAWN 1616M - 16x Analogue I/O, Dante/AES67

DARK8O - 8x Analogue outputs to Dante

DARK8ADI - 8x Analogue/4x AES3 input to Dante

DARK88 MKII - 8x8 Line-level to Dante

Dark88 MKII is a dedicated, rack-mounting, Dante Ethernet interface, designed for use in demanding broadcast environments. It has eight, balanced inputs and outputs and can be used as a stand-alone interface, or in conjunction with a second, directly linked, Glensound interface as an audio 'snake', or for use as the network-connected or point-to-point interface to Glensound's Dante commentator units.

It has both redundant network cable connection and redundant power supply for extra resilience and has SFP slots providing the option to use multimode or single-mode redundant fibre connections for additional range. It can also provide Power-Over-Ethernet (POE) to the Inferno commentator unit when directly connected to it by Cat5 Ethernet cable.

Dante is a software and hardware solution, offering high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with low latency and accurate synchronization. For further information, DANTE networking basics. In a Dante network, the Dante Controller web interface controls audio routing. Any Dante input can be routed to any other output on the network, or to multiple network output points.

The four network connections of the Dark88 can be configured as a switch. In this configuration, if the primary and secondary redundant SFP/fibre slots have been used as the network link, the RJ45 connections can be used to loop out to further local DARK units or other Dante devices that will all be shown separately on the network within the Dante Controller configuration utility.

The front panel of the 1U high rack-mounting chassis has two LEDs to indicate power is present from the two internal power supplies and a mini-B USB socket for performing firmware updates in conjunction with 'Reset' and 'Update' buttons. Two SFP slots are provided to take optional primary and secondary SFP fibre interfaces; two Ethercon sockets provide primary and secondary copper Ethernet connections.

The rear panel is extremely crowded, containing eight male and eight female XLR connectors for the eight line-level outputs and eight line-level inputs. Two IEC power inlets feed the redundant power supplies.

Audio inputs: +18dBu maximum, 20k ohms. Audio outputs: +18dBu maximum, 50 ohms. Inputs and outputs are electronically balanced and can be wired unbalanced. Distortion: 0.0022% THD, 1kHz, referred to +8dBu output. Noise: -93dB RMS, A-weighted 'at line up'. Dynamic range: 111dB. Power source: 2x 100 - 240V AC, 47-63Hz, 16W at 230V AC. Dimensions: 442 x 303 x 44mm (wxdxh), 1U rack mounting. Weight: 3kg.

Included accessories: 2x power cables, with UK 13A connectors.
Optional accessories: Dante/SFPS, Dante/SFPM, Dante/SFP1, and Dante/SFP2.

DARK16I - 16x analogue input to Dante

DARK16O - 16x analogue outputs to Dante

DARK1616 - 16x16 line-level and AES to Dante

DARK1616D - 8x8 AES to Dante

DARK1616M - 16x16 mic/line-level and AES to Dante

Optional SFP Modules

Dante/SFPS is a single-mode module and Dante/SFPM is multi-mode. Dante/SFP1 and Dante/SFP2 are for use over distances up to 10km and are WDM (wavelength-division multiplexing) types, a multiplexing technology which can be used to enable bi-directional communication over a single fibre. Dante/SFP1 should be used in a pair with SFP2 Dante breakout boxes: See Dante interfaces.